800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
Dive Rite Nomad Side-Mount Butt-Plate and Bungees Kit
|
List Price:
|
$170.00
|
|
Our Price:
|
$139.95
|
|
You Save:
|
$30.05 (18%)
|
SKU:
DIV2725
In Stock
|
|
|
Whats in the box:Butt-Plate, Bungees, Tank Chokers and Assembly Screws The Nomad Butt-Plate and Bungees Kit allow divers who wish to transform their Existing TransPac Harness and Buoyancy Compensating Wing into a Rig Capable of Side-Mounting Tanks. The Nomad Butt-Plate weaves through Standard 2" (5.1 cm) Harness Webbing on the Waist Strap and is Locked-Tight into Place using Stainless Steel TransPac Assembly Screws through Slots on the Back-Plate. Butt-Plate and Bungees comes Standard with Dive Rite's Ring Bungees and Tank Chokers. When Side-Mounting Stage Tanks or Re-Breather Bailout Bottles, Butt-Plate Rails can be difficult to access if Back-Mounted Gear Covers Them-Up. Problem solved with Dive Rite's New Tech Butt-Plate. Its Rectangular Shape places Tank Attachment Points at the Edge of the Diver's Body, while Outrigger Hardware is Easy to Find due to its Orientation Facing Outwards on the Plate. The Butt-Plate is made of Reinforced Nylon to provide the Proper amount of Rigidity to Hold Tanks in Position and Eliminate Sag. Two Stainless Steel Handles are used for Tank Attachment. Included with the Butt-Plate are Two Stainless Steel Assembly Screws for Securing Butt-Plate to a Back-Plate. The Butt-Plate is equipped with 5 Rust and Corrosion Resistant Stainless Steel Grommets, accommodates any size Crotch Strap. The Included Bungees take the guesswork out of bungee sizing with Nomad Bungee Loops. Bungees are 5/16" (8 mm) Nylon Cord Bungee Material. All Hardware is Marine-Grade 316-Stainless Steel. Nylon Cord Bungees are equipped Stainless Steel Clips, Rings and Quick Release Snaps used to Secure Tanks to Harness. The Butt-Plate and Bungees Kit is covered by a 12 month limited warranty and is proudly made in the USA.
- Dive Rite Nomad Side-Mount Butt-Plate and Bungees Kit:
- 1 Year Limited Warranty
- Made in the USA
- Butt-Plate:
- Designed for Side-Mounting Stage Tanks or Re-Breather Bailout Bottles
- Rectangular Shape Places Tank Attachment Points at Edge of Diver's Body
- Back-Mounted Gear Doesn't Cover Handles Up
- Outrigger Hardware Easy to Find, Orientation Facing Outwards
- Reinforced Nylon Construction
- Proper Rigidity Holds Tanks in Position and Eliminate Sag
- Two Stainless Steel Handles for Tank Attachment
- Stainless Steel Assembly Screws for Securing Butt-Plate to Back-Plate
- Corrosion Resistant Stainless Steel Grommets
- Accommodates Any Size Crotch Strap
- Bungees:
- 5/16" (8 mm) Nylon Cord Bungee Material
- Bungees take the guesswork Out of Sizing with Nomad Bungee Loops
- Stainless Steel Clips, Rings and Quick Release Snaps
- Hardware is Marine-Grade 316-Stainless Steel
- Bungees Secure Tanks to Harness
| Materials | Butt-Plate: Reinforced Nylon, 316-Stainless Steel
Assembly Screws: Stainless Steel
Bungees: Nylon Cord and 316-Stainless Steel | | Buckles | Swivel Snap Clips | | Weight [with packaging] | 1.6 lb |
|
|
Related products for Dive Rite Nomad Side-Mount Butt-Plate and Bungees Kit
|
Nomad Divers who need to Add Weight to their Rig will want the new Nomad Weight Plate. Carrying up to 16 lbs (7.26 kg) of weight in 4-Separate Pockets, the Nomad Weight Plate attaches to the Back of the Nomad using the Existing Grommets in the Back-Plate. The Pockets will accept both Hard and Soft Weights. Formed in the Shape of the Back-Plate, It Lies Flat and isn't felt by the Diver. The Grommets of the Plate measure at 11.5" (29.2 cm) Center-to-Center, giving an extra 0.5" (1.3 cm) of Spacing as compared to the Grommets of the Nomad Back-Plate... more
Tags: DIV2727, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Nomad Side-Mount Weight Plate
|
Available to divers who already own a TransPac+ harness and wish to build a Nomad**. With 50lbs/22.6 kg of lift, the Nomad XT can be a single (BC4600) or dual bladder (BC4550-DUAL) wing. Its unique bladder design allows a single bladder Nomad XT to be altered to become a dual bladder wing at a later date, if desired. The XT Wing Series is built upon the legendary toughness of SuperFabric+ brand technology, a technical fabric resistant to cuts, pinches and abrasions. Created with a base fabric overlaid with tiny guard plates, this proprietary armored surface... more
Tags: DIV560012, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite Nomad XT Wing 12" With Elbow
|
Available to divers who already own a TransPac¦ harness and wish to build a Nomad**. With 50lbs/22.6 kg of lift, the Nomad XT can be a single (BC4600) or dual bladder (BC4550-DUAL) wing. Its unique bladder design allows a single bladder Nomad XT to be altered to become a dual bladder wing at a later date, ifdesired. The XT Wing Series is built upon the legendary toughness of SuperFabric¦ brand technology, a technical fabric resistant to cuts, pinches and abrasions. Created with a base fabric overlaid with tiny guard plates, this proprietary armored surface... more
Tags: DIV5600D, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite Nomad XT Wing Dual Bladder
|
Designed for warm water diving with aluminum 80s, the Nomad LT is our lightest and most streamlined sidemount rig in the Nomad line. Available in either an overhead environment model (BC4525) or an open water model (BC4530), the Nomad LTs exceptional design creates the first sidemount rig of its kind that is simple to set up and configure with an all-in-one webbing harness and wing combination. Pivot points at the chest provide comfort for women and large-chested divers and stainless steel slides at the waist provide a customizable fit. See our Nomad LT Fitting Video for tips... more
Tags: DIV4525, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite Nomad LT Sidemount Rig Tec
|
The stainless steel assembly screws are used for attaching various accessories to a Trans-Pac harness or to a hard back plate (such as lift bag pouches, suit inflation mounting systems and side mount butt plates). Another common use is tosecure the wing to the Trans Pac harness or hard back plate when rigged for a single tank. Designed to fit through a 3/8" hole, the Stainless Steel Assembly Screws include O-rings that create friction to help keep the screw in place, sold as a set of two.... more
Tags: DIV1069P, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Transpac Assembly Screw Pair
|
When Side-Mounting Stage Tanks or Re-Breather Bailout Bottles, Butt-Plate Rails can be difficult to access if Back-Mounted Gear Covers Them-Up. Problem solved with Dive Rite's New Tech Butt-Plate. Its Rectangular Shape places Tank Attachment Points at the Edge of the Diver's Body, while Outrigger Hardware is Easy to Find due to its Orientation Facing Outwards on the Plate. The Butt-Plate is made of Reinforced Nylon to provide the Proper amount of Rigidity to Hold Tanks in Position and Eliminate Sag. Two Stainless Steel Handles are used for Tank Attachment... more
Tags: DIV1030, Dive Rite, General Accessories, Assorted Accessories, Dive Rite Tech Butt-Plate
|
The XT Back-Plate Pad's High-Tech Design consists of Molded Foam Contoured in all the right places to Prevent Uncomfortable Pokes and Prods when Wearing a Metal Back-Plate. Mesh Airflow Channels provide Instant Draining Topside and Resist Compression allowing the Pad to maintain its Thickness and Comfort at Depth. An Integrated Sleeve means the XT Back-Plate Pad can also be used to carry Lift Bags or Surface Markers. The Dive Rite XT Back-Plate Pad is constructed from Strong and Durable 1,000-Denier Ballistic Nylon for Maximum Tear and Abrasion Resistance... more
Tags: DIV1036, Dive Rite, General Accessories, Assorted Accessories, Dive Rite XT Back-Plate Pad
|
New size! Dive Rite's Single Tank Adapter (STA) has been Re-Sized to fit squarely in the opening of Dive Rite's Travel and Voyager Series Wings. For divers who frequently switch between Double Tank and Single Tank Rigs, Dive Rite's Single Tank Adapter is a convenient way to attach Cam Straps to a Hard Metal Back Plate that does not have Tank Band Slots. Increase the Versatility of your Set-Up with this Single Tank Adapter. Adapter is constructed of Marine Grade 304-Stainless Steel, comes with Mounting Hardware, measures 13" x 3-3/8" (33 x 8.5 cm) and weighs 1.1 lbs (0.5 kg)... more
Tags: DIV1090SS, Dive Rite, General Accessories, Assorted Accessories, Dive-Rite Stainless Steel Single Tank Adapter (STA)
|
The Dive Rite Primary Cave Reel has 250' (76.2 meters) of Heavy .083" (2.11 mm) #36 DuPont Fiber Braided Line, with 350 lbs (158.76 kg) Breakage Strength and a X-Large Marine Grade Stainless Steel Bolt Snap. The Reel positions the Handle on Top, which helps divers who use a handheld light to hold both the light and the reel in one hand, freeing the other hand to work the reel. The Marine Grade Stainless Steel Frame of the reel comes with a Series of Pre-Drilled Holes so divers can change positions from a Top-Mount Handle to a Side-Mount Handle or a Left-Hand Operated Reel... more
Tags: DIV4310, Dive Rite, Reels, Add-On Gear, Dive-Rite Primary Reel Without Drag 250' #36
|
The Travel XT is a Lightweight Wing Designed for Single-Tank, Warm Water Diving. Dive Rite's Travel Series of Wings are Small-Profile and ideal for Travel and divers who wear a Minimal amount of Weight. At 25 lbs (11.3 kg) of Lift, the Travel XT can accommodate one 80 cubic feet (12 liter) Tank with no more than 16 lbs (7.26 kg) of additional weight With its Donut-Shape, the Travel XT Wing provides greater Stability and Control in the water. Donut-Style or 360 Degree Wings promote an even volume of inflation on top, sides and bottom... more
Tags: DIV510012, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite Travel XT Wing 12" With Elbow
|
The XT1 Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT1's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT1 performs right alongside premier regulators on the market today. The Dive Rite XT1 Regulator with five 3/8" Threaded Low Pressure Ports gives divers Ultimate Flexibility in Hose Routing. This is Especially Beneficial to the Back-Mount Technical Diver where the need for a Streamlined Regulator Configuration is required... more
Tags: DIVRG5100D, Dive Rite, Regulators, Essential Equipment, Dive Rite XT1 First Stage Only (No Hose) Din
|
|
|