800.637.6880
212.645.1234
|
|
See More Similar
Scuba Hoods »
|
|
Xcel Thermoflex 4/3 mm Hood with Bib X-Large
SKU:
XCLH4
|
|
|
Questions about this item:
Shopper Sizing help pls. Head 22 inches at forehead widest point. Neck 12.5 inches. Really easy to pull on and off? Generally I hate 5mm hoods but was willing to trek this since it's thinner and stretchy. Tx
SHAUN S My head is around 22 or just a bit more at forehead and my neck is like 14 inches. I have the medium and it is a perfect fit. It is easy to put on and take off. It seems like really good neoprene and is definitely a little stretchier than a 5mm hood. This xcel hood is more comfortable to me and better fitting around the part that seals around my face than any other brand hood I've tried be it a 3mm or 5mm. As far as warmth goes, I dove it in water as cold as 57degree without any problem and was fine ...and I'm generally a bit of weenie about cold.
Whats in the box:Xcel Thermoflex 4/3 mm Hood with Bib The Xcel Thermo-Flex 4/3 mm Hood with Bib is Tough, Built to Last and will give you years of use. This Multi-Density Vented Hood with Inner Glide-Skin Face Seal and Contoured Chin assures Comfort and Warmth. The Vent eliminates Trapped Air that can occur when breathing from a Scuba Regulator or upon entering the water. The trapped air can cause cold water to enter the hood. With the Vent this problem is eliminated. The Inner Glide-Skin Face Seal will also keep outside water from entering the hood, allowing the water trapped in the hood to warm up to your body temperature keeping you warmer longer. The Hoods Face Seal is equipped with Bar Tacks. These Bar Tacks allow you to Custom Trim the Face Seal without the fear of the Seams Separating, giving the Hood a better fit when wearing your dive mask. Hood is manufactured using a Thermo-Bamboo Inner Liner. This unique Liner is made from a Blend of Bamboo Charcoal-Infused Fibers and Recycled Poly Fibers. Thermo-Bamboo has Excellent Heat Retention and helps Improve Warmth. All Seams are Double Glued and Blind Stitched for a Leak Proof Design to keep your Head Comfortable throughout the dive. The Xcel Thermo-Flex 4/3 mm Hoods Extended Bib allows Layering with your wetsuit increasing the Thermal Barrier in the Critical Neck and Chest area. Hood is available in 5 sizes from Small to 2X-Large and is covered by a 3 month limited warranty.
- Xcel Thermoflex 4/3 mm Hood with Bib
- Tough, Built to Last for Years of Use
- Thermo-Bamboo Inner Liner for Warmth
- Blend of Bamboo Charcoal-Infused Fibers and Recycled Poly Fibers
- Eco-Friendly Product
- Vented Top to Expel Trapped Air
- All Seams are Double Glued and Blind Stitched
- Multi-Density Vented Hood
- Inner Glide-Skin Face Seal and Contoured Chin
- Face Seal with Bar Tacks for Custom Trimming
- Extended Bib for Layering with Wetsuit
- 5 Sizes from Small to 2X-Large
- 3 Month Limited Warranty
| Material | Nylon II Neoprene Rubber
Bamboo Charcoal-Infused Fibers and Recycled Poly Fibers | | Thickness | 4/3 mm | | Seams | Double Glued and Blind Stitched | | Weight [with packaging] | Small: 0.5 lb, Medium, X-Large: 0.55 lb, 2X-Large, Large: 0.6 lb |
|
|
Related products for Xcel Thermoflex 4/3 mm Hood with Bib X-Large
|
The Xcel Thermo-Flex 4/3 mm Hood with Bib is Tough, Built to Last and will give you years of use. This Multi-Density Vented Hood with Inner Glide-Skin Face Seal and Contoured Chin assures Comfort and Warmth. The Vent eliminates Trapped Air that can occur when breathing from a Scuba Regulator or upon entering the water. The trapped air can cause cold water to enter the hood. With the Vent this problem is eliminated. The Inner Glide-Skin Face Seal will also keep outside water from entering the hood... more
Tags: XCLH42XL, XCEL, Hoods, Exposure Protection, Xcel Thermoflex 4/3 mm Hood with Bib 2X-Large
|
The Xcel Thermo-Flex 6/5/4 mm Hood with Bib is Tough, Built to Last and will give you years of use. This Multi-Density Vented Hood with Inner Glide-Skin Face Seal and Contoured Chin assures Comfort and Warmth. The Vent eliminates Trapped Air that can occur when breathing from a Scuba Regulator or upon entering the water. The trapped air can cause cold water to enter the hood. With the Vent this problem is eliminated. The Inner Glide-Skin Face Seal will also keep outside water from entering the hood... more
Tags: XCLH62XL, XCEL, Hoods, Exposure Protection, Xcel Thermoflex 6/5/4 mm Hood with Bib 2X-Large
|
The Xcel Thermo-Flex 7/6 mm Jumpsuit is a Semi-Dry Back Zippered Entry Full Suit that is Tough, Built to Last and will give you years of use. The Suit has an Adjustable Velcro Wrap Collar with a Low-Cut Shaped Front Neck for Mobility and Comfort. The Suits Back Zipper is a Premium S-Lock Zipper that keeps more water out than conventional zippers. Inner Glide-Skin for a great Seal around the Neck forms an Excellent Seal against the Skin. Suit also has a Spine Pad for added comfort when wearing a Scuba Cylinder. Shoulders have Tonal Print Graphics that Reduce Wear and Tear from the BCD... more
Tags: XCLT7M2XL, XCEL, Wetsuits, Exposure Protection, Xcel Thermoflex 7/6 mm Men's Jumpsuit, Black 2X-Large
|
Scuba Pro's Everflex Hood is a Unisex Designed, Multi-Thickness Hood with a 6.5 mm Hood, 5 mm Bib and a 3 mm Face Seal all made from Super-Stretch Nylon ll Neoprene Rubber. The Hood will keep your Head Warm in Cold or Tempered Water Conditions, along with providing Protection from Sun Burn when worn on the Surface. The Scuba Pro Everflex 6.5/5/3 mm Hood has Glued and Sewn Seams for Strength and Durability. The Everflex Material makes Donning and Doffing Easy. The Hood is available in sizes Small, Medium, Large, X-Large and 2X-Large... more
Tags: SCPHE2XL, Scubapro, Hoods, Exposure Protection, Scuba Pro Everflex Hood 6.5/5/3 mm Unisex, Black/Gray 2X-Large
|
|
|