800.637.6880
212.645.1234
|
|
See More Similar
Scuba Dive Reels »
|
|
Scubapro X-Tek Mini Finger Reel with Stainless Steel Clip and 100' (30.48 meters) Line
SKU:
SCPXTMR
In Stock
|
|
|
Whats in the box:Scubapro X-Tek Mini Finger Reel with Stainless Steel Clip and 100' (30.48 meters) Line Scubapro's Finger Reels are most often used as a gap reel or for short distance exploration. Small and low-profile, a Finger (Spool) Reel fits nicely out of the way in a pocket or clipped off to a D-ring. The holes in the side allow for clipping in a double ended snap anywhere along the perimeter of the spool to keep the line tight when not in use or to connect two Finger Reels together. Scubapro's X-Tek Mini Finger Reel is manufactured from Lightweight Delrin Composite and comes with 0.6" (1.5 mm) diameter Braided Nylon Line that is approximately 100' (30.48 meters) long. Reel measures 2.75" (7 cm) in diameter and is equipped with a Corrosion Resistant Stainless Steel Double-Ended Spring Loaded Gate Clip.
- Scubapro X-Tek Mini Finger Reel with Stainless Steel Clip
- Small and Low-Profile Design 2.75" (7 cm) Diameter
- Double Ended Stainless Steel Spring Loaded Gate Snap Clip
- Approximately 100' (30.48 meters) of Line
- 0.6" (1.5 mm) Diameter Braided Nylon Line
- Most Often Used as Gap Reel or Short Distance Exploration
- Simple Construction
- Fits in BCD Pocket or Attached to Harness D-Ring
- Side Holes for Easy Clip-Off
- Corrosion Resistant Delrin Composite Construction
| Spool O.D. | 2.75" (7 cm) | | Line Material | Braided Nylon | | Line Diameter | 0.6" (1.5 mm) | | Line Length | Approximately 100' (30.48 meters) | | Reel Materials | Reel: Delrin Composite
Clip: Stainless Steel | | Weight [with packaging] | 0.4 lb |
|
|
Related products for Scubapro X-Tek Mini Finger Reel with Stainless Steel Clip and 100' (30.48 meters) Line
|
Many fins on the market today have a button molded onto the side of the fin. Attached to the button are different styles of plastic clips which hold a rubber strap and an adjustment mechanism. Divers often find this system awkward to adjust when geared up. Manta is currently releasing a new style of mounting clip to attach their Spring Fin Straps to these style fins.The clip is made of electro-polished stainless steel and is designed to simulate the attaching portion of the plastic clip. This makes installation a SNAP. Simply push your old clip off and slide on the new... more
Tags: General Accessories,Manta Fin Straps,Manta Spring,Assorted Accessories,Fin Straps with Stainless Steel,Manta Straps with Stainless Steel Clip,Manta,Manta Spring Fin Straps with Stainless Steel Clip Large
|
Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB8W, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 8.00" 3.0" WIDTH
|
These stainless steel finger spools are as rugged as they come. Crafted of 16 gauge 304L stainless steel for durability in marine-grade environments, these reels are TIG welded and then electro-polished. Available in 30-foot (9.2m) and 100-foot (30.5m) increments, these stainless steel spools are compact with a narrow footprint as compared to similar plastic spools, giving the diver the advantage of saving real estate or carrying multiple spools easily. Smooth edges provide comfort and an easily-held ergonomic design. Includes a premium quality... more
Tags: DIVFSS100, Dive Rite, Reels, Add-On Gear, Dive Rite Stainless Steel Finge Spool 100'
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System with Stainless Steel Back Plate
|
Scuba Pro's X-TEK products incorporate many years of knowledge and experience offering tech divers exceptional results. No matter where your dives may take you: to the most mysterious caves, in old, dilapidated ship wrecks or in the deepest depths of the oceans, with the TEK products from SCUBAPRO you will always have a reliable and safe companion. Scubapro's X-Tek Pure Tek Harness System utilizes a Secure Continuous Nylon Webbing Strap for a Custom Fit. The X-Tek Harness System has 5 Stainless Steel D-Rings with 2 on the Shoulders, Two on the 2" (5... more
Tags: SCPXTPTHS, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Pure Tek Harness System
|
Hollis Gears new line of Mini Seeker Reels were designed to be the best performing primary dive reels available. The Spool is Injection Molded using Glass Filled Nylon which is stronger than traditional ABS providing a Durable Core. This Core is bolted to an Aircraft Grade 6061-T6 Hard Anodized Aluminum Handle using a one piece Stainless Steel Shaft and is controlled by a Stainless Steel Lockdown Screw. All parts are engineered with the strictest tolerances which eliminate line traps or failures... more
Tags: HLSMSR, Hollis Gear, Reels, Add-On Gear, Hollis Mini Seeker Reel with 200' (61 meters) of #24 Line
|
A knife is an important tool to take along on the dive, and the Talon is a durable, strong choice. The stainless steel blade measures 4.5 inches (11.4 cm) in length, and is made of durable and corrosion resistant 316 stainless steel. The blade features a medium point, and is equipped on one side with a curved straight edge and a line cutter, and a serrated edge on the other. The handle features a comfort grip and stainless blunt end for tank banging. The sheath comes with a pressure lock release mechanism and leg straps for a secure attachment... more
Tags: Akona Stainless Steel Knife,Stainless Steel Knife,Akona Talon Stainless Steel Medium Point Knife (Ak925),Knives,Sidekick Stainless Steel Knife,Akona Knife,Akona Sidekick,Akona,Add-on Gear
|
The X-Tek Form Tek Harness is a Three-Piece Form-Harness-System with padded shoulders and Anatomically Optimized Back Pack for the ultimate in comfort is equipped with Quick Release Buckles on both left and right shoulders and a Cross-Chest Sternum Strap all for easy removal. The Shoulder and Sternum Straps are Adjustable for a Custom Fit. System comes standard with a Stainless Steel Back-Plate and is convertible for single cylinder use. The Form Tek System has more D-Rings for attachment of accessories than most Tek Setups on the market. Four Large D-Rings on the Shoulders... more
Tags: SCPXTFTH, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Form Tek Harness System with Stainless Steel Back Plate
|
You're putting together your own Back-Plate and Harness System and want to use a Crotch Strap to prevent Cylinder Ride-Up". Scubapro's X-Tek Crotch Strap will fit Back-Plate's from Scubapro and other Back-Plate's which are slotted for 2" (5.1 cm) Nylon Webbing. Crotch Strap comes complete with 2 Corrosion Resistant Stainless Steel D-Rings for attachment of Accessories, Crotch Strap is Adjustable for a Custom Fit. Webbing is easy to install and has Durable Box Stitched Loop for Added Strength on the Waist Strap Attachment End... more
Tags: SCPXTCS, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Crotch Strap
|
Traveling with a Heavy Stainless Steel Back-Plate can add unnecessary weight to your baggage limit, costing you additional travel fees. Lighten the load when you travel with your Scubapro X-Tek Form Harness Assembly. This X-Tek Soft Travel Back-Plate is easy to install on your Harness and will allow easy packing and lighter weight for the traveling Technical Diver. Soft Back-Plate is made from Durable Nylon Fabric and Webbing with Taped and Sewn Edges for added Strength and Durability... more
Tags: SCPXTTA, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Soft Travel Back-Plate
|
For divers who frequently switch between double tank and single tank rigs, Scubapro's X-Tek Single Tank Adapter is a convenient way to attach a Single Cylinder Assembly to your X-Tek Back-Plate. Adapter comes complete with Mounting Hardware and 2 Scubapro Super Chinch Tank Cam Bands. Easy to install on the X-Tek Form, Pro or Pure Harnesses in conjunction with the Stainless Steel or Aluminum Back-Plate, you'll be ready for single cylinder use. Scubapro Super Chinch Tank Cam Bands are equipped with Corrosion Resistant Stainless Steel Cam Buckles attached to Durable 2" (5.1 cm) Nylon Webbing.... more
Tags: SCPXTSTA, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Single Tank Adapter
|
|
|