800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
XS Scuba Second Stage Hose QD - Male Only (Used with SKU: XSSSSQD)
|
List Price:
|
$16.00
|
|
Our Price:
|
$15.95
|
|
You Save:
|
$0.05
|
SKU:
XSSSQDM
In Stock
|
|
|
Questions about this item:
Shopper I have a Zeagle BCD and an Octopus+. The low pressure hose to the BCD is a standard with 3/8 connector, which is too small to fit on the male connector in the reg. Can this adapter link both, the standard female connector and the Zeagle male one?
DOMINIC F The standad BCD low pressure hose female connector will be to small to connect to this male quick connect
Whats in the box:Second Stage Hose QD - Male Disconnect Only If you have different Second Stage Regulators for different Rig Configurations and they are not always attached to your Low Pressure Hose, you might want to install a Quick-Disconnect (QD) fitting so you won't need to use a wrench. When you swap out Second Stage Regulators and are changing them out with a wrench any Repair Technician can tell you if it is not done correctly you can actually De-Tune your Regulator and not even know it! The Second Stage Regulators Critical Valve Seats usually seals against the Second Stage Inlet Fitting. This fitting can be accidentally turned if you do not first place the appropriate wrench on its wrench flats before turning the hose fitting with another wrench. Failure to use two wrenches when removing a hose can drastically change the valves Opening Effort, rendering the Second Stage Useless for Safe Diving. XS Scuba's Second Stage Hose QD (SKU: XSSSSQD) can eliminate this problem. The complete QD is required for one set up, but if you have multiple second stages you will need one Female Coupling connected to your Hose and multiple Male Fittings for each of your additional second stages, so you can plug them into your Hose Female Coupling. This Male QD Fitting allows attachment of another second stage regulatorto a single hose. Male QD is manufactured from Durable Chrome Plated Brass for Low Maintenance and Long Life. Coupling is Factory Cleaned and has Viton O-rings. Coupling is designed for Low Pressure Only below 200 psi (13.8 bars).
- XS Scuba Second Stage Hose QD - Male Only
- Used with XS Scuba's Second Stage Hose QD (SKU: XSSSSQD)
- Allows Attachment of Multiple Second Stages to Single Hose
- Chromed Brass Construction
- Easy to Install
- Low Pressure Only - Below 200 psi (13.8 bars)
- Factory Cleaned - Viton O-Ring
| HP or LP | LP | | Materials | Chrome Plated Brass | | Working Pressure | 200 psi (13.8 bars) | | Quick Connect | Yes, Male Fitting | | Weight [with packaging] | 0.4 lb |
|
|
Related products for XS Scuba Second Stage Hose QD - Male Only (Used with SKU: XSSSSQD)
|
If you have different Second Stage Regulators for different Rig Configurations and they are not always attached to your Low Pressure Hose, you might want to install a Quick-Disconnect (QD) fitting so you won't need to use a wrench. When you swap out Second Stage Regulators and are changing them out with a wrench any Repair Technician can tell you if it is not done correctly you can actually De-Tune your Regulator and not even know it! The Second Stage Regulators Critical Valve Seats usually seals against the Second Stage Inlet Fitting... more
Tags: XSSSSQD, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Second Stage Quick Disconnect
|
XS Scuba Replacement Paintball Quick Disconnect Adapter fits on the SKU: XSSPBF Paint Ball Filler. QD is manufactured from Durable Rust Resistant Stainless Steel and works just like a BCD QD. One end of the Adapter has 1/4" NPT Male Threads with the opposite end with a Paint Ball Quick Disconnect Fitting. Easy to install and the QD Fitting makes it simple to use. Fitting has a 5,000 psi (350 bars) working pressure. Paint Ball QD Adapter is covered by a 24 month limited warranty.... more
Tags: XSSPBQDA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba, Paint Ball Quick Disconnect Adapter
|
Rinsing your BCD Bladder is important to the Life of your Buoyancy Control Devise. Mineral Deposits when allowed to dry can cut right through the Urethane Laminate or Bladder requiring replacement of the BCD Bag or Bladder. XS Scuba's unique design not only cleans your BCD Internal Bladder, but it also cleans your Inflator mechanism. The XS Scuba BC Wash-Out Hose is designed to fit on any inflator with a standard male QD Nipple. Hose allows you to wash the inside of you BC to remove build up salt crystals or foreign debris... more
Tags: XSSBWH, Aqua, General Accessories, Assorted Accessories, BC Washout Hose by XS Scuba
|
Dive Gear weighs a lot and can get bulky. If there is a way to streamline it and make it weigh less it's a plus for the diver. Streamlining reduces water resistance, conserves air, and is less likely to get snagged on something. If your gear weighs less it's easier to transport to and from the boat or dive site, and with weight restrictions when we fly every ounce (gram) counts. XS Scuba's DuoKev High Pressure Hose address both these issues. Hose is 35% Thinner than Traditional Rubber HP Hoses 0.31" (8 mm), this streamlined design lowers your profile, reducing water resistance... more
Tags: XSSDHPH24, XS Scuba, General Accessories, Assorted Accessories, XS Scuba DuoKev High Pressure Hoses 24"
|
If you have an air supply that uses Industrial Style" Hoses with 1/4" NPT Female Threads and want to run a Scuba Regulator Second Stage from this air supply this Adapter Fitting can make it happen. Having the ability to run a second stage regulator from an air source such as a compressor or storage bottles eliminates the need to wear a cylinder on your back, and can be handy when you need to work under a boat or clean a swimming pool... more
Tags: XSSFNPTA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Female 1/4" NPT Adapter
|
Highland by XS Scuba's DuoKev Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Pressure Gauge has a Chromed Brass Housing for Strength and Durability, a Luminescent Gauge Face for Easy Reading when Night Diving or in Low Light Conditions. This Compact Gauge measuring a mere 1.96" (5 cm) in Diameter and .55" (1.4 cm) Thick. Gauge has Readout of 0 to 5,000 psi and the Air-Spool comes standard with Viton O-rings so it's Nitrox Ready... more
Tags: XSSDTGC, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba DuoKev Two Gauge Console
|
Highland by XS Scuba's DuoKev Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Pressure Gauge has a Chromed Brass Housing for Strength and Durability, a Luminescent Gauge Face for Easy Reading when Night Diving or in Low Light Conditions. This Compact Gauge measuring a mere 5 cm (1.96") in Diameter and 1.4 cm (.55") Thick. Gauge has Readout of 0 to 420 bars and the Air-Spool comes standard with Viton O-rings so it's Nitrox Ready... more
Tags: XSSDTGCM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba DuoKev Two Gauge Metric Console
|
Mounting systems for pony bottles can have you pulling your hair out just to get them set up on your rig. XS Scuba's Highland Stainless Steel Pony Mount removes all the frustration and makes the attaching and detaching a breeze. Made from (316 grade) stainless steel for corrosion resistant durability and long life this unique mounting system comes equipped with rubber feet to protect your cylinders finish. Pony Mount allows mounting of pony bottle on right or left side and upright or upside-down. Pony Mount is designed to fit 6.9" to 8.0" (17.5 to 20... more
Tags: XSSSSPM, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Pony Mount
|
|
|