800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
Highland by XS Scuba 10' (3 meters) Surface Marker Buoy Orange
|
List Price:
|
$100.00
|
|
Our Price:
|
$90.00
|
|
You Save:
|
$10.00 (10%)
|
SKU:
XSSSMB10
|
|
|
Questions about this item:
Shopper Can it be inflated by an octopus?
Shelley R I know some of the safety sausages have an opening in the bottom to allow inflation with your octo or reg, I'm not sure this one does. It looks like it just has the valve that you manually inflate or as Craig said use your inflator hose.
CRAIG H Yes. The lower end will open to allow a free-flow octopus to be the source of air fill. You can also DC your low pressure hose (Air2 or inflator) and connect to a valve that is on the side.
Shopper What is the weight of this item in the storage pouch?
Whats in the box:Highland by XS Scuba 10' (3 meters) Surface Marker Buoy with Mesh Carry Pouch Surface Marker Buoy's (SMB) are now a requirement for all divers. If you don't dive with a SMB you need to start now. It makes sense to be safe. Highland by XS Scuba's SMB is a big 10' (3 meters) tall Buoy for superior visibility on the surface day or night. SMB has a wide 22" (56 cm) circumference giving it 75 lbs (19.43 kg) Surface Lift, so it can double as a great lift bag too! Even with its increased height, circumference and lift it still stows compact in an included 6.5" X 12" (16.5 x 30.5 cm) Mesh Carry Pouch. The Pouch comes equipped with Grommets for Back-Plate Attachment for added conveniences (mounting hardware not included). The Highland by XS Scuba's SMB has multiple features for Safety and Versatility. Three Bands of 3M SOLAS" Reflective Tape, Stainless Steel D-Ring at Top for Strobe Light attachment and an Elastic Holder for a Chemical Light Stick all to improve Surface Visibility Day or Night. Inflation of the SMB is made easy with the Combination Oral and BCD Quick-Disconnect Inflator Valve. Air will stay in the SMB with its Anti-Spill Baffled Bottom and over-pressurizing is never a problem with the built-in Overpressure Relief Valve (OPV) with Manual Dump Cord. If you find a treasure underwater that you need help getting to the surface, the 20" (50.8 cm) long Lift Harness with Stainless Steel D-Ring with give you the edge. SMB is manufactured with Durable Urethane Coated Nylon and is available in Orange and Yellow Colors.
- Highland by XS Scuba 10' (3 meters) Surface Marker Buoy
- BIG 10' (3 meters) Long with 22" (56 cm) Circumference
- Large Enough to Greatly Enhance Diver Visibility
- Stows Compact Enough to Carry Easily on Every Dive
- 75 lbs (19.43 kg) of Surface Lift
- Baffled Bottom for Anti-Spill Inflation
- Combination Oral and BC QD Inflator
- Overpressure Relief Valve (OPV)
- 3 Bands of 3M "SOLAS" Reflective Tape for Improved Surface Visibility
- Stainless Steel D-Ring at Top for Strobe Light Attachment
- 20" (50.8 cm) Long Lift Harness with Stainless Steel D-Ring
- Elastic Chemical Light Stick Holder at Top
- Includes 6.5" X 12" (16.5 x 30.5 cm) Mesh Carry Pouch
- Pouch Equipped with Grommets for Back-Plate Attachment
- Back-Plate Mounting Hardware Not Included
- Durable Urethane Coated Nylon Construction
- Available in Orange or Yellow Colors
| Materials | SMB: Urethane Coated Nylon
Grommets and D-Rings: Stainless Steel | | Dimensions | Length: 10' (3 meters)
Circumference: 22" (56 cm) | | Color | Orange or Yellow | | Storage Bag | Yes | | Inflation (Valve) | Combination Oral and BC QD Inflator | | Lift | 75 lbs (19.43 kg) | | Light Attachment | Yes: D-Ring for Strobe, Elastic for Chemical Light Stick | | Over Pressure Relief Valve | Yes | | Manual Dump Valve | Yes: Combo with OPV | | Weight [with packaging] | 1.55 lb |
|
|
Related products for Highland by XS Scuba 10' (3 meters) Surface Marker Buoy Orange
|
Surface Marker Buoy's (SMB) are now a requirement for all divers. If you don't dive with a SMB you need to start now. It makes sense to be safe. Highland by XS Scuba's SMB is a big 10' (3 meters) tall Buoy for superior visibility on the surface day or night. SMB has a wide 22" (56 cm) circumference giving it 75 lbs (19.43 kg) Surface Lift, so it can double as a great lift bag too! Even with its increased height, circumference and lift it still stows compact in an included 6.5" X 12" (16.5 x 30.5 cm) Mesh Carry Pouch... more
Tags: XSSSMB10YL, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba 10' (3 meters) Surface Marker Buoy Yellow
|
Divers are all supposed to carry a Surface Marker Buoy (SMB) and Signaling Devises to comply with national dive safety standards. That nice, but your safety is important with or without standards, so the smart diver always carries a surface marker buoy and Signaling Devises on every dive. XS Scuba's Rescue Kit with Safety Marker Buoy is a complete Kit for the Safety Conscious Diver. Kit includes a huge with a 75" (190.5 cm) overall length and a 7.5" (19.1 cm) width SMB. Built tough to last, Surface Marker Buoy is manufactured from Tough Urethane-Backed... more
Tags: XSSRKITOR, XS Scuba, Safety & Rescue, Watersports, XS Scuba Rescue Kit with Surface Marker Buoy Orange SMB
|
The Surface Marker Pro Buoy is a Delayed Surface Marker Buoy (DSMB) that should be inflated at depth prior to ascent via the opening at the bottom of the unit. The self sealing internal baffle will ensure that the unit stays fully inflated during its ascent and on the surface. The expanding air is vented via the Over Pressure Release Valve. The Surface Marker Buoy comes in 3 different color models. Safety Orange- Both sides of the buoy are orange. This is normally used by tech divers in most parts of the world during their ascent and decompression stop to signal the All OK... more
Tags: SMRBC, Surface Marker, Safety & First Aid, Add-On Gear, Surface Marker Buoy Orange/Yellow Orange/Yellow
|
The DiveAlert SMB (surface marker buoy) features Closed-Circuit (one-way valve) construction, which prevents air spill at surface. Inflate on the surface to attract visual attention or redundant flotation. Inflate at depth to send up as a surface marker. Solas reflective tape (Coast Guard approved) across top of SMBcreates better visibility day and night. Over-Pressure Valve (OPV) prevents bursting and easy air dumping. Deluxe SMB is 65" long by 8" wide (165 x 20 cm) which provides approximately 40 lbs. (18.1 kg) of lift. Nylon strap handle on top allows for easy attachment of light or slate... more
Tags: AQUDASMB, Dive Alert, Safety & First Aid, Add-On Gear, Dive Alert Surface Marker Buoy, Orange
|
You just found a 50 lbs (23 kg) davenport anchor and can't figure out how you can get this prize back to the surface. You need a lift bag. You never know what you're going to find on a dive that is worth money, so always pack a lift bag when you go diving. XS Scuba offers 100 lbs (45.4 kg) Lift Bags with a unique "anti-spill" bottom with baffle to allow easy fill from any device and prevent lift bag from dumping air or taking on water when it hits the surface. Bag is equipped with over pressure relief valve (OPV) with pull for manual release of air... more
Tags: XSSLB100OR, XS Scuba, Lift Bags, Add-On Gear, Highland by XS Scuba 100 Pound (45.4 kg) Lift Bag Orange
|
Surface Marker Buoy's (SMB) are now a requirement for all divers. If you don't dive with a SMB you need to start now. It makes sense to be safe. XS Scuba's Safety Tube is a Durable Urethane Coated Nylon SMB that measures 6" (1.83 meters) in length, has a circumference of 9" (22.9 cm) and is Bright Orange in Color for High visibility when inflated on the surface. Safety Tube rolls up compact and comes with its own Mesh Bag with Snap Clip. The Compact Size 5" x 3" (12.7 x 7.6 cm) fits securely in your BCD Pocket or can be clipped to your gear for easy access when needed... more
Tags: XSSSSTBH8, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Spare Hardware Complete Kit for Cylinder Bands 8.00 Bands
|
Highland by XS Scuba's Inline Shut-Off is an inline valve that can be used for closing off the air flow to your second stage regulator or Re-Breather. Easy to install on standard hoses placed between the hose and the first stage regulator for quick and easy shut-off of air or to allow air flow to continue. Just slide the Knurled Slide Collar to Shut-Off or Turn-On Gas Flow. Slide is made from Durable Machined Delrin and the Ribbed Texture makes it easy to operate even when wearing gloves. Inline Shut-Off has 3/8-24 UNF Male Inlet to 3/8-24 UNF Female Outlet Threads... more
Tags: XSSISF, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Inline Shut-Off at First Stage
|
Technical Divers who use Aluminum or Stainless Steel Back-Plates have a need for Attachment of Accessory Items. Most Back-Plates have Holes on them specifically for this purpose. Book Screws are used to anchor the accessory in place to keep them secure and close at hand. Highland by XS Scuba's Stainless Steel Book Screws are Non-Rusting and allow the diver to Attach Accessories to their Back-Plate. Book Screws come as a complete set with both Male and Female Threaded Components and include Friction O-Rings. Book Screws are designed to pass through 3/8" (9.5 mm) Back-Plate Holes... more
Tags: XSSBS, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Book Screw, Complete Set
|
The Highland by XS Scuba Compact DIN First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 135 to 145 psi (9.3 to 10 bars) intermediate at 3000 psi (200 bars) cylinder pressure. The Compact Low Profile First Stage is manufactured from Durable Marine Grade Brass with a Chrome Finish has one High Pressure Port and two Low Pressure Ports. Regulator comes equipped with a 200/300 bar (3000/4350 psi) DIN Connection which can be quickly converted to a Yoke Style First Stage with the addition of an Optional Spin-On Yoke Adapter... more
Tags: XSSCDF, Highland Millworks, Regulators, Essential Equipment, Highland by XS Scuba Compact DIN First Stage
|
XS Scuba's Pyrostretch 3/2 mm Men's Jumpsuit is like wearing no suit at all. At least that's what you will feel like once you put it on. The Pyrostretch Nylon ll Neoprene Rubber is so elastic that the suit goes on with little effort, and once on gives an incredible Custom-Like Fit. The Glide-Skin Neck, Wrist, and Ankle Seals will help keep you Warm throughout the dive. The Suit is Built-to-Last with Flat-Lock Stitched Seam Construction for X-Treme Durability and Molded Rubber Kneepads. Suit has a Heavy-Duty #10-YKK Back Zipper with Cold Water Zipper Dam, Comfort-Flap... more
Tags: XSSP32XL, XS Scuba, Wetsuits, Exposure Protection, XS Scuba Pyrostretch 3/2 mm Men's Jumpsuit 2X-Large
|
|
|