800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
XS Scuba Male 1/4" NPT Adapter
|
List Price:
|
$10.00
|
|
Our Price:
|
$9.95
|
|
You Save:
|
$0.05
|
SKU:
XSSMNPTA
In Stock
|
|
|
Whats in the box:XS Scuba Male 1/4" NPT Adapter with O-Ring Do you have Pneumatic Tools and want a more portable way to use them than lugging around an air compressor? XS Scuba's Male 1/4" NPT Adapter can make this so. Use your Scuba Regulator and Cylinder to run those tools by threading the Adapter with its Standard 3/8-24 Male Threads into a First Stage Low Pressure Port and connect your Industrial Style" Hose with 1/4" NPT Female Threads to the Adapter and you're ready to roll. Run Drills and other Pneumatic Tools right off your Scuba Cylinder. Use with Pony Bottle when on the road to quickly remove and replace a flat tire or run a drill in a remote location with ease! Adapter is made from Brass with a Black Chrome Finish, comes with O-Ring Seal for attachment to the First Stage Regulator and is designed to be used with Low Pressure Only-below 200 psi (13.8 bars). Adapter makes a handy item to diversify the use of your Scuba Rig!
- XS Scuba Male 1/4" NPT Adapter
- Run Drills and other Pneumatic Tools with Scuba Cylinder and Regulator
- Threads Directly to First Stage 3/8" LP Port
- Opposite End Threads to "Industrial Style" Hose with 1/4" NPT Female Threads
- No Compressor to Lug Around
- Increased Portability of Pneumatic Tools
- Great Travel Companion for Fast Flat Tire Replacement
- Brass Construction with Black Chrome Finish
- Low Pressure Only - Below 200 psi (13.8 bars)
| HP or LP | LP | | Materials | Black Finish Chromed Plated Brass | | Threrad Size | Inlet: 3/8-24 Male
Outlet: 1/4" Male NPT | | Working Pressure | 200 psi (13.8 bars) | | Weight [with packaging] | 0.25 lb |
|
|
Related products for XS Scuba Male 1/4" NPT Adapter
|
If you have an air supply that uses Industrial Style" Hoses with 1/4" NPT Female Threads and want to run a Scuba Regulator Second Stage from this air supply this Adapter Fitting can make it happen. Having the ability to run a second stage regulator from an air source such as a compressor or storage bottles eliminates the need to wear a cylinder on your back, and can be handy when you need to work under a boat or clean a swimming pool... more
Tags: XSSFNPTA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Female 1/4" NPT Adapter
|
XS Scuba Replacement Paintball Quick Disconnect Adapter fits on the SKU: XSSPBF Paint Ball Filler. QD is manufactured from Durable Rust Resistant Stainless Steel and works just like a BCD QD. One end of the Adapter has 1/4" NPT Male Threads with the opposite end with a Paint Ball Quick Disconnect Fitting. Easy to install and the QD Fitting makes it simple to use. Fitting has a 5,000 psi (350 bars) working pressure. Paint Ball QD Adapter is covered by a 24 month limited warranty.... more
Tags: XSSPBQDA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba, Paint Ball Quick Disconnect Adapter
|
If your Scuba Pro Inflator Mechanism is leaking every time you attach your hose to the connector on your BCD Inflator you may need a new BCD Connector. This 1/4" NPT Male Scuba Pro BCD connector is made of Marine Chrome Plated Brass for Strength and Durability. Adapter makes a Great Save-a-Dive Kit Item.... more
Tags: 1/4" Npt Male for Scuba Pro Bcd Connector,General Accessories,Npt Scubapro Bcd Connector,Assorted Accessories,Aqua,Bcd Connector,Aa05
|
If your Inflator Mechanism is leaking every time you attach your hose to the connector on your BCD Inflator you may need a new BCD Connector. This 1/4" NPT Male standard BCD connector fits most inflator mechanisms. This BCD connector is made of marine grade chrome plated brass for strength and durability, and comes with a standard BCD Connector O-ring so it's ready for installation.... more
Tags: 1/4" Npt Male to Standard Bcd Connector (Aa04),Aa04,General Accessories,Male to Standard,Assorted Accessories,Aqua,Bcd Connector
|
Does your Regulator Second-Stage feel uncomfortable in your mouth when diving? Does it feel like it is trying to pull out of your mouth when you turn your head? If these are problems you have experienced when diving than you may need a Hose Adapter that can eliminate this problem. XS Scuba's 90 Degree Adapter makes your Primary Second Stage Regulator more Comfortable while you dive. Adapter is installed between your Second Stage and the regulators Low Pressure Hose and allows you to Route the Hose under your right arm instead of over the shoulder... more
Tags: XSSRAA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba 90 Degree Right Angle Adapter
|
Can't stand using a hooded vest because every time you put one on or take it off you feel you have lost half your hair or part of your nose! Looking for a great hooded vest that you won't hate putting on! XS Scuba's 3/4/6 mm Pyrostretch Hooded Vest has a soft and comfortable fit. This Soft and Comfortable Super Stretch Hooded Vest is equipped with a Vented Top Panel to prevent Trapped Air from your Regulator Exhaust. Hooded Vest is manufactured with Nylon l Neoprene Rubber with a Glide-Skin Interior... more
Tags: XSSHV2XL, XS Scuba, Hoods, Exposure Protection, XS Scuba Men's 3/4/6 mm PyroStretch Hooded Vest with Side Zipper 2-XLarge
|
This award-winning product is the most comfortable weight belt ever developed. It is fully adjustable and designed for a custom fit on every diver. Each belt has two independent sleeves with pockets that are sewn together. Thus, a six pocket belt has two sleeves built from three pockets. Pockets are built with 1000 Denier Cordura for durability and long life. Double needle stitching adds to their strength and durability. Pockets hold up to 5 lbs (2.27 kg) of hard or shot lead and the 2" (5.1 cm) Nylon Webbing Belt adjusts quick and easy to your size... more
Tags: Xs Scuba,General Accessories,Xs Scuba Belt,Assorted Accessories,Xs Scuba Weight Belt 4 Pocket Black,Weight Belt
|
Some Regulator Manufactures have Low Pressure Ports that won't accept all Low Pressure Hoses. The Machine Port will not let other manufactures Low Pressure Hoses to properly seat and create a seal. XS Scuba's Low Pressure Port Extender can eliminate this problem by extending the Low Pressure Ports Threads further away from the First Stage Body. Low Pressure Port Extender is designed for Standard 3/8" Low Pressure Hoses. Adapter has 3/8-24 Female x 3/8-24 Male Threads, so it will accept Standard Regulator or Power Inflator Hoses. Adapter is Low Profile with a Height of 0.63" (16 mm)... more
Tags: XSSLPPE, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Low Pressure Port Extender
|
Does your Regulator Second-Stage feel uncomfortable in your mouth when diving? Does it feel like it is trying to pull out of your mouth when you turn your head? If these are problems you have experienced when diving than you may need a Hose Adapter that can eliminate this problem. XS Scuba's 110 Degree Adapter makes your Primary Second Stage Regulator more Comfortable while you dive. Adapter is installed between your Second Stage and the regulators Low Pressure Hose and allows you to Route the Hose under your right arm instead of over the shoulder... more
Tags: XSSA110, XS Scuba, General Accessories, Assorted Accessories, XS Scuba 110 Degree Adapter
|
|
|