800.637.6880
212.645.1234
|
|
See More Similar
Scuba Regulators »
|
|
Zeagle Flat Head 7 Yoke First Stage Only
SKU:
ZGLFH7Y
In Stock
|
|
|
Warranty Information
This product has a limited lifetime warranty.
www.zeagle.com/
(813) 782-5568
Whats in the box:Yoke First Stage Only The Flathead 7 is one of the Flagships of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Wide-Open Internal Structure allows for Direct and Unrestricted Airflow through the First Stage, giving very Low Breathing Resistance, even at great Depths and High Demands. It is very Low in Profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers. Zeagle's Conical Precision High-Pressure Valve provides much greater Reliability and Service Life compared to conventional designs, while Improving Responsiveness and Performance at all breathing rates. The Flathead 7 provides High Performance Porting in a Balanced Diaphragm Design First Stage that will give you years of service. The Balanced Diaphragm, Chrome Plated Marine Brass First Stage Regulator is inherently Environmentally Sealed. The benefit of this type of first stage design is that none of the delicate internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants can cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance. The added clear diaphragm membrane and hydro-transmitter, communicate external ambient pressure changes to the internal valve mechanism. The total exclusion of water from the regulator's interior including the spring chamber, means that no ice can form inside during cold water dives. The First Stage Regulator has 5 Low Pressure Ports 3/8"-24 UNF Thread and 2 High Pressure Ports 7/16"-20 UNF Thread. The First Stage weighs 1.80 lbs (816 g) is Nitrox Ready to 40% out of the box and comes with a Limited Lifetime Warranty.
- Zeagle Flat Head 7 Yoke First Stage
- Balanced Diaphragm Design
- High Performance Porting
- Precision HP Valve
- HP Valve: Improves Responsiveness and Performance at All Breathing Rates
- Dry Environmental Seal with Hydro Transmitter
- Body: Chrome Plated Marine Brass
- 5 Low Pressure Ports (3/8"-24 UNF)
- 2 High Pressure Ports (7/16"-20 UNF)
- Factory Ready: EAN/ NITROX to 40% O2
- Weight: 1.80 lbs (816 g)
- Limited Lifetime Warranty
- Made in the USA
| 1'st Stage Type | Balanced Diaphragm | | LP Ports | 5, Thread 3/8"-24 UNF | | HP Ports | 2, Thread 7/16"-20 UNF | | Nitrox Compatible | Yes Up to 40% O2 | | Materials | Chrome Plated Brass | | Total Weight | 1.80 lbs (816 g) | | Weight [with packaging] | 2 lb |
|
|
Related products for Zeagle Flat Head 7 Yoke First Stage Only
|
The Flathead LT is one of the Flagships of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Wide-Open Internal Structure allows for Direct and Unrestricted Airflow through the First Stage, giving very Low Breathing Resistance, even at great Depths and High Demands. It is very Low in Profile, barely extending above the tank valve... more
Tags: ZGLFH7LY, Zeagle, Regulators, Essential Equipment, Zeagle Flat Head LT Yoke First Stage Only
|
The Flathead LT is one of the Flagships of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Wide-Open Internal Structure allows for Direct and Unrestricted Airflow through the First Stage, giving very Low Breathing Resistance, even at great Depths and High Demands. It is very Low in Profile, barely extending above the tank valve... more
Tags: ZGLFH7LD, Zeagle, Regulators, Essential Equipment, Zeagle Flat Head LT DIN First Stage Only
|
First Stage: The Zeagle Flat Head 7 is the flagship of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Flat Head 7 is very Low in Profile, barely extending above the tank valve, and places the low pressure hoses directly out to the sides, in a pattern preferred by many divers. The Flat Head 7 Regulator is set for Yoke Valve's... more
Tags: ZGLZXY, Zeagle, Regulators, Essential Equipment, Zeagle ZX Flathead 7 Yoke Regulator
|
Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The DS-V First Stage has proven itself from the Antarctic to the tropics, in deep technical dives as well as in recreational use. The Zeagle DS-V First Stage Regulator has an Internal Structure that allows for Direct Airflow through the First Stage, providing Outstanding Performance... more
Tags: ZGLDSY, Zeagle, Regulators, Essential Equipment, Zeagle DS-V Dry Sealed Yoke First Stage Only
|
Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The 50D First Stage has proven itself from the Antarctic to the tropics, in deep technical dives as well as in recreational use. The 50D First Stage has a Convenient and Ergonomic Swivel Turret Hose Design... more
Tags: ZGL50DD, Zeagle, Regulators, Essential Equipment, Zeagle 50D Dry Sealed DIN First Stage Only
|
The Flathead 7 is one of the Flagships of Zeagle's Regulator Line. Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The Wide-Open Internal Structure allows for Direct and Unrestricted Airflow through the First Stage, giving very Low Breathing Resistance, even at great Depths and High Demands. It is very Low in Profile, barely extending above the tank valve... more
Tags: ZGLZXD, Zeagle, Regulators, Essential Equipment, Zeagle ZX Flathead 7 Regulator, DIN with DIN to Yoke Adapter
|
The XT Regulator welcomes a new generation of regulator performance at Dive Rite. An Elite Performer, the XT's advanced, Patented Design earns top marks from Mike Ward of Dive Lab. With work of breathing at less than 1.0 J/l, the XT performs right alongside premier regulators on the market today. The Dive Rite XT1 First-Stage Regulator with Five-3/8" Threaded Low Pressure Ports gives divers Ultimate Flexibility in Hose Routing. This is Especially Beneficial to the Back-Mount Technical Diver where the need for a Streamlined Regulator Configuration is required... more
Tags: DIVRG5300Y, Dive Rite, Regulators, Essential Equipment, Dive Rite XT1 First Stage with XT2 Second Stage Regulator Yoke
|
The Hollis DC1 1st Stage Regulator is an Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSFSDC1Y, Hollis Gear, Regulators, Essential Equipment, Hollis DC1 First Stage Only Yoke
|
The Hollis DC2 1st Stage Regulator is a Compact and Streamlined Over-Balanced Diaphragm Regulator Design that provides progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids... more
Tags: HLSFSDC2Y, Hollis Gear, Regulators, Essential Equipment, Hollis DC2 First Stage Only Yoke
|
progressively greater intermediate pressure as depth and gas density increases for superior gas delivery under the most extreme conditions. The diaphragm membrane transmits the pressure changes to the internal mechanism eliminating the need for the surrounding water to enter the intricate mechanism. The benefit of this type of first stage design is that none of the internal parts are exposed to contaminants such as salt, sand, chlorine or pool acids. These environmental contaminants cause corrosion and mineral deposits to form on the internal mechanism deteriorating regulator performance... more
Tags: HLSFSDC3Y, Hollis Gear, Regulators, Essential Equipment, Hollis DC3 First Stage Only Yoke
|
50D First Stage: Zeagle's regulators are US made, built under strict controls for quality in Zeagle's own factory, using state of the art equipment and procedures. Your regulator is one of your most important pieces of gear. No matter what kind of diving you do, you can do it better with Zeagle. The 50D First Stage has proven itself from the Antarctic to the tropics, in deep technical dives as well as in recreational use. The 50D First Stage has a Convenient and Ergonomic Swivel Turret Hose Design... more
Tags: Essential Equipment,Zeagle Din with Yoke Adapter,Regulators,Zeagle 50d,Zeagle,Zeagle Zx Regulator,Zeagle Zx 50d Din/Yoke Regulator
|
Keeping your regulator protected from the elements when it is not connected to a cylinder is important to your safety and the reliability of your Life Support System. Protect your regulator from water, dirt, dust and crawling critters. This non-corrosive Rubber Yoke Style Protector Cap is the best kind to ensure proper protection. It seals over the first-stage air inlet when you snug down the yoke screw of the regulator in place to protect your regulator from having water enter inside the delicate internal mechanism when washing your gear after diving... more
Tags: Rubber Yoke 1st Stage Protector,General Accessories,Rp89,Din Tank Valve Protector,Assorted Accessories,Rubber Din,Aqua,Valve Protector
|
The Highland by XS Scuba Compact DIN First Stage is a Non-Balanced, Reliable and Simple Flow-By Fail Safe Piston Design that is factory set at 135 to 145 psi (9.3 to 10 bars) intermediate at 3000 psi (200 bars) cylinder pressure. The Compact Low Profile First Stage is manufactured from Durable Marine Grade Brass with a Chrome Finish has one High Pressure Port and two Low Pressure Ports. Regulator comes equipped with a 200/300 bar (3000/4350 psi) DIN Connection which can be quickly converted to a Yoke Style First Stage with the addition of an Optional Spin-On Yoke Adapter... more
Tags: XSSCDF, Highland Millworks, Regulators, Essential Equipment, Highland by XS Scuba Compact DIN First Stage
|
|
|