800.637.6880
212.645.1234
|
|
XS Scuba Single Weight Pocket
4.5
See More Similar
Scuba Weights and Belts »
|
|
XS Scuba Single Weight Pocket Black
|
List Price:
|
$11.00
|
|
Our Price:
|
$9.95
|
|
You Save:
|
$1.05 (10%)
|
SKU:
XSSTWP
In Stock
|
|
|
Questions about this item:
Shopper It has been suggested that a simple 2 lb ( varies based on person/bcd etc) trim weight on the back of tank will avoid the face down push of a back inflation bcd. Has anyone else had experience using the pocket to do this?
ROBERT M I purchased 2 of these to add pockets for non-releaseable weights on my non-integrated BC. They were large enough for the 4lb weights I used(a 2lb weight would flop around) and they worked fine for about 5 dives. However one started to shred at the side seam and I had to discard it before it broke and lost the weight. I'm not sure that I would purchase one of these again.
BERNARD R If your BCD pushes you forward enough that it's noticable, 2 lbs on the back of your tank probably won't help. I recommend you look for another BCD; I did just that when I had a similar problem. Being pushed forward by your BCD can be dangerous, especially when you surface in choppy water and you're out of, or low on air. It happened to me and I can only recommend a flotation device that solves the problem. I do like having weight on my back, but a BCD with rear weight pockets or a weight belt loaded to the rear is a better way to go. Experiment with different combinations in calm water.
Good luck and happy diving.
DAVID M B You will always play with weight pocket locations for trim. On my system, Once the correct location was found, it is worth its value. Very durable product, ez to use
LEONARDO D I use this,because I don"t like to carry all the weight on my hip.It 's beter for my back
DAVID B I haven't tried it myself but it 's worth s try.
MARK E I suggest 2 pockets with 2# each. I tried one pocket but it makes it hard to adjust the strap. With 2 you have good balance and easy access to the strap.
Shopper what is the size of this pocket?
ALAN D 4" X 4"....why doesn't leisure pro provide this information to you?
If I can measure the item why can't leisure pro?
JAMES W It will easily hold a (5) lb hard or soft weight, BUT, I DO NOT RECOMMEND getting this pocket at the current time.
I have (4) of them and have found that the velcro flap is not strong enough to hold the weight in the pocket if a diver is horizontal or inverted.
I'm working with XS Scuba on replacing the pockets that I have and they have just sent me two of their pockets with the weight ditching tabs on them for evaluation and the velcro is MUCH stronger on them.
The pockets are just the right size for trim weights but I'd advise against this particular product right now until they have made the design change to put a better velcro on the flaps.
STERLING L The pocket is 4" square when the velcro flap is closed. After the pouch is mounted on a tank strap, if you need to insert the strap through the mounting openings of a wing, the pouch's bottom folds up inside the pouch, reducing the dimensions to 4x3" so it can tuck neatly through the opening.
The pouch neatly holds a 2# hard or soft weight (but I've squeezed a 3# soft weight in). I place two pouches on the upper tank band and use them for 4# total of trim weight.
To install the pouches or to remove them, you have to take off the tank band.
MICHAEL R I used 2 pockets with 4lb. weights to balance / trim my KISS Rebreather. The 4 lb. weight fits loosely in the 4" square pocket. It would probably hold a little more since the sides and top can be pushed out a little larger...
WAYNE M The pocket is just big enough to fit a 4 lb. weight.
Shopper Is this for one or a set of two
LeisurePro S Just the one pocket.
Warranty Information
This product has a limited warranty of 24 months.
www.xsscuba.com
(866) 977-2822
Whats in the box:XS Scuba Single Weight Pocket Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, or maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your weight belt? Whatever you need to get more stability or comfort in diving from the lead weight this XS Scuba Single Tank Weight Pocket can help. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band, weight belt webbing or harness depending on where you want to hang the pocket. It can also work with XS Scuba's Pony-Pac Harness. Durable and strong Nylon construction with Velcro Closure and Taped and Stitched Edges for long life, pocket can hold up to 5 lbs (2.27 kg) of shot or hard lead. XS Scuba's Single Weight Pocket is perfect for adjusting your trim and is available in Black, Blue or Yellow Colors.
- XS Scuba Single Weight Pocket
- Designed to Add Up to 5 lbs (2.27 kg) of Shot or Hard Weight
- Slides-Over End of 2" (5.1 cm) Webbing or Harness
- Easy Addition to XS Scuba Pony-Pac
- Perfect for Adjusting Trim
- Durable Nylon Construction with Velcro Closure
- Taped and Stitched Edges for Strength
- Available in Black, Blue and Yellow Colors
| Material | Nylon and Velcro | | Closure | Velcro Hook & Pile | | Type | Weight Pocket (5 lbs/ 2.27 kg) | | Gear Attachment | 2" (5.1) Webbing | | Weight [with packaging] | 0.95 lb |
By David from Anna Maria FL 2/28/2013 5.0Perfect trim weight pocket 7/15/2012 5.0Great product, makes weighting easy! By Dalton from Hillside, NJ By HaeundaeFunDiver from Korea
|
|
Related products for XS Scuba Single Weight Pocket Black
|
Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, or maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your weight belt? Whatever you need to get more stability or comfort in diving from the lead weight this XS Scuba Single Tank Weight Pocket can help. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band, weight belt webbing or harness depending on where you want to hang the pocket... more
Tags: Xs Scuba Weight Pocket,Xs Scuba Single Weight Pocket Blue,Xs Scuba,General Accessories,Assorted Accessories,Xs Scuba Tank Pocket,Tank Weight Pocket
|
This Unique Weight Pocket by XS Scuba is designed to be used in two ways. First it can be used with the XS Scuba Weight Belt (SKU: XSSWB) as an Add-On Pocket and it also can be used as a Trim Weight Attached to your Cylinder Cam Band. The Extra Velcro Loop attached to the Front Closure of the Pocket allows Excess Webbing from Cam Band to be attached to the front of the pocket, keeping your Profile more Streamlined. Pockets are built with 1000 Denier Cordura for Durability and Long Life. Double Needle Stitching adds to their Strength and Durability. Pockets hold up to 5 lbs (2... more
Tags: XSSSWPV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Single Weight Pocket with Velcro Front
|
Do you teach diving, do you find the need for additional weight on certain dives, and is your trim in the water not exactly as you want it? All these needs can be met with XS Scuba's Quick-Attach Single Weight Pocket. Pocket is great when teaching and you need to quickly add additional weight to a new student. When you change exposure suits or add layers of neoprene for warmth, or you keep leaning in one direction or the other when fining and want to correct you're trim. Pocket allows quick addition of up to 5 lbs of lead in each pocket without having to slide over the end of a webbing belt... more
Tags: XSSQAWP, XS Scuba, General Accessories, Assorted Accessories, Xs-Scuba Quick-Attach Single Weight Pocket
|
The XS Scuba Zippered Mesh Pocket is a versatile Detachable Pocket that can be attached to the diver in 3 different ways. Pocket can be attached to either 2" (5.1 cm) Nylon Webbing such as a Weight Belt or Harness Straps. The Pocket can also be attached to a 4" (10.2 cm) Cummerbund or with the use of 2 Noncorrosive Locking Gate Clips it can be attached to your BCD. The XS Scuba Zippered Mesh Pocket has a Zippered Closure with D-Ring and Snap Clip inside for added Security. Pocket is made from Self-Draining Mesh and is perfect for small Lights, Slates or Gloves. Zippered Mesh Pocket measures 8... more
Tags: XSSZMP, XS Scuba, Gear Bags, Add-On Gear, XS Scuba Zippered Mesh Pocket
|
Designed to adjust your trim when using a set of double cylinders, the XS Scuba Tail Weight Pouch attaches to cylinder with lower cylinder band bolts. Nylon Mesh Pouch is equipped with two Stainless Steel Grommets for attachment and has a sealed opening with double Velcro closure to keep lead secure regardless of your body position underwater. All seams are sewn for strength and durability. Just pour in your lead shot up to 6 lbs (2.7 kg) or with its wide opening which allows the use of hard weights up to 5 lbs (2.27 kg)... more
Tags: XSSWB500, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Tail Weight Pouch (WB500)
|
For divers who frequently switch between double tank and single tank rigs, Highland by XS Scuba's Single Tank Adapter is a convenient way to attach cam straps to a hard metal back plate that does not have tank band slots. Increase the versatility of your set up with this Single Tank Adapter. Adapter is constructed from 14-Gauge .074" (2 mm) 316-Stainless Steel, with a Polished #4 Stainless Steel Finish. Highland by XS Scuba's Single Tank Adapter has slots to facilitate 2 Cam Band for added cylinder stability, includes 18-8 Stainless Steel Mounting Hardware and measures 15" x 3" (38.1 x 7... more
Tags: XSSSTA, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Single Tank Adapter
|
Having the right Spares can make the difference between a Great Dive and Sitting on the Beach or Boat and waiting for everyone to come back and telling you about how great the dive was! Highland by XS Scuba's Single Tank Adapter Replacement Hardware makes a great Save-a-Dive Kit item. Included with the Kit is 2 pieces 5/16-18 x 1" Carriage Bolts 18-8 Stainless Steel (SS), 2 pieces 5/16-18 Wing Nuts 18-8 SS, 2 pieces 5/16 x 3/4 OD Flat Washer 18-8 SS and 2 pieces 5/16 Retaining Washer Nylon. Everything you need to eep you diving and not waiting for the divers to return!... more
Tags: XSSSTARH, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Single Tank Adapter Replacement Hardware
|
Do you teach diving, do you find the need for additional weight on certain dives, and is your trim in the water not exactly as you want it? All these need scan be met with XS Scuba's Quick-Release Single Weight Pocket. Pocket is great when teaching and you need to quickly add additional weight to a new student. When you change exposure suits or add layers of neoprene for warmth, or you keep leaning in one direction or the other when fining and want to correct you're trim. Pocket allows quick addition of up to 5 lbs of lead in each pocket just slide over the end of a webbing belt... more
Tags: XSSQRWP, XS Scuba, General Accessories, Assorted Accessories, Xs-Scuba Quick-Release Single Weight Pocket
|
Designed to adjust your trim when using a set of double cylinders, the XS Scuba V" Nylon Mesh Weight Pouch attaches to back-plates center groove with cylinder band bolts. Pouch is equipped with two stainless steel grommets 11" (27.9 cm) center-to-center for attachment and has a sealed opening with double Velcro closure to keep lead secure regardless of your body position underwater. Just pour in your lead shot up to7 lbs (3.16 kg). All seams are sewn for strength and durability... more
Tags: XSSWB550, XS Scuba, General Accessories, Assorted Accessories, XS Scuba "V" Weight Pouch (WB550)
|
Highland by XS Scuba's Back-Up Mask is a Tough Mask and Buckle Designed, 2 Windowed Mask that has a Durable, yet Super-Soft Silicone Rubber Skirt and is available in all Black Silicone with Minimal Black Frame. Mask is equipped with Tempered Safety Lenses, has a Double Feathered Edge Skirt and Split Style Mask Strap for a Great Comfortable Seal on the Face. A Low Profile Mask with an Easy Access Nose Pocket for One Handed Ear Equalization gives a great Field of Vision for a Wide View of the Diving Environment... more
Tags: XSSBUM, Highland Millworks, Masks, Essential Equipment, Highland by XS Scuba Back Up Mask, Black Silicone
|
The XS Scuba Companion Travel BCD is what you are looking for in a Lightweight great Lift BCD. The Companion is 40% lighter than traditional BCD's weighing in at a mere 5 lbs (2.27 kg) and boasts a 30 lbs (13.61 kg) lift capacity in a Back Inflation Style Air Cell. Exclusive Micro-Pac Backpack gives the stability of a "hard pack" and the comfort of a "soft pack". It also makes packing for travel more compact. The Companion Travel BCD has two trim weight pockets with Velcro release that carry up to 5 lbs (2.27 kg) each... more
Tags: XSSCTBRG, XS Scuba, Buoyancy Compensators, Essential Equipment, XS Scuba Companion Travel BCD, Black Regular (35" to 45")
|
|
|