800.637.6880
212.645.1234
|
|
XS Scuba Standard Cam Bands
4.5
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
XS Scuba Standard Cam Bands Small
|
List Price:
|
$25.00
|
|
Our Price:
|
$18.95
|
|
You Save:
|
$6.05 (24%)
|
SKU:
XSSTB
In Stock
|
|
|
Questions about this item:
Shopper i am looking for a tank band to replace the one i broke on my Mares Icon BC,will this work?Wouldnt I need a large size?
ROBERT G Assuming you are using a standard size tank (7"-8" in diameter), buy the standard band. FYI, read the specification tab, it spells it out.
CASEY G No these bands will work just fine...
RICHARD W Not sure about fit with a Mares BC. I bought this for my Oceanic and it fit perfectly and actually was a better band than the original.
ALEX S XS is the brand, not the size. The bands are standard size and I have used them on different backpacks and they work fine. Plenty of band length.
MATT N Hi, I have a set of these on my pony-size bail-out bottle and they work quite well - just check the cylinder diameter for your application, or measure with a string for a overall length, and check it against the specifications. I think you will be happy with these if they offer a set that will fit.
Shopper Do these straps have the rubber backing on them to Help grip the tank? I couldn't tell by the photo
STEVEN G No rubber backing - I used one for securing a pony tank and it works well.
ERIC Z No, they are just basic heavy duty straps with plastic buckle's and Velcro to secure the loose end.
ERIC H Nope, there are no rubber linings on these straps.
DANIEL R No, they don't have any rubber backing on them.
ROBERT B No rubber backing....yet for the price they work very well. I use them for my 30 cu in Pony bottle and have gone so far as using on my 133 STL tank and adding a 80 AL tank, as a pony, and the straps work well!
JOHN J Hi,
These bands acheive positive grip on the tank by using the ratcheting effect of the cam buckle, but do not have a rubber backing.
I use these bands for a single tank bc as well as for sidmount bands. They work very well.
LARRY V No they do not have a rubber backing.... When used in the double strap configuration they do very well at holding most 12L and 15L tanks
SIMON H They do not have a rubber backing, I have not had an issue with them coming loose. They have a positive click on the buckle which helps in getting the cam tight. Good quality and good price for a replacement strap and a spare!
DYLAN S No rubber backing but if properly adjusted they grip very well. I use them to hold a pony tank and I highly recommend them.
CARLOS R No, but these cams are so good that you do not need the rubber inserts to get a good grip on the tank, I use a 100cf steel tank and these cams have never lost their grip, even while diving from a boat.
Shopper Do they fit the standard Dive Rite backplates (stainless or aluminum)?
Thanks.
PHILIP L I use them on an OMS aluminum backplate and they work fine.
LEROY B If the backplate is similar to oms, yes. I have oms bc with backplate, and they do fit that one.
BILLY F depend
if the backplate has the needed slots then yes
view the pic of the packplate here, the two vertical slots by the bottom bolthole and two vertical slots by the top bolthole
http://www.leisurepro.com/Prod/DIV2116.html?Search=op%3ddtSearch%26Term%3dbackplate%26SearchFlag%3dall%26AdvSrchSortField%3dRelevance%26DescSort%3d0%26Description%3don%26Hit%3d1
if not they you will need a STA (Single Tank Adapter)
http://www.leisurepro.com/Prod/DIV1090SS.html?Search=op%3ddtSearch%26Term%3dSingle%2bTank%2bAdapter%26SearchFlag%3dall%26AdvSrchSortField%3dRelevance%26DescSort%3d0%26Description%3don%26Hit%3d1
an STA uses the two straps to connect to the tank and has two bolts to allow you to connect to the backplate.
Doug M These come packaged as a PAIR right?
Thanks!
EBEN A I've purchased two sets of these since I was so happy with the first set. Yes, they come in pairs and they are of excellent quality. - Sincerely, Eben
ROBERT S Yes, they came as a pair. I used one for my pony tank mount and sold the second one to another diver.
RICHARD W Yes, there are two bands. I replaced a 10 yr old band on my BC recently with one of these and wish I had done it earlier. They are well worth the price.
SAM S Hi yes they come as a pair, I have a set these are good quality for the price.
JOSE D "Hi Doug I bought both the small and large set and they both come as a set of two. The small set (which is sorter) I use on my pony bottle. The large set I use on my 7.25 and 8.0 size tanks. Below is some info on these cam band that I copied from Leisure Pros web site. Hope this helps.
Whether you need a cylinder cam band for your pony bottle or your primary cylinder XS Scuba has a cam band for all your needs. The BP550 Cam Bands - Pair - Short Length (used to fit 4.0" to 5.0" cylinders), and the BP500 Cam Bands - Pair - Standard Length (used to fit 6.9" to 8.0" cylinders)."
JOSE D Hi Doug
I bought both the small and large set and they both com as a set of two.
The small set (which is sorter) I use on my pony bottle. The large set I use
on my 7.25 and 8.0 size tanks.
Below is some info on these cam band that I copied from Leisure Pros web
site. Hope this helps.
Whether you need a cylinder cam band for your pony bottle or your primary
cylinder XS Scuba has a cam band for all your needs. The BP550 Cam Bands
- Pair - Short Length (used to fit 4.0" to 5.0" cylinders), and the BP500 Cam
Bands - Pair - Standard Length (used to fit 6.9" to 8.0" cylinders).
JEFF J Yes, as the features page states, there are 2 bands in the package. Make sure to order the large one for normal tanks, the small are for pony bottles.
MATT B Yes these come as a pair. They're basically a pair of no-frills cam bands. Very solid construction and they do exactly what you want them to do; hold your tank. They don't have the fancy clip system that the XS Scuba SS straps do. It's a nice looking system, but you can't beat these for the price and the simplicity.
JOHN J Yes, I purchased these and they are for the pair (Two).
I use them for replacement bands for my recreational BC as well as for rigging my sidemount tanks.
These are a great value.
Cheers,
JJ
LARRY V These bands come as a pair.
They fit 80 (12L) and 100 (15L) tanks and work quite well for reducing tank slip.
Good quality too.
Larry
Doug M Thanks for the help!
MIKE C Yes you get two of them in the package
Joe M will the short cam bands fit standard AL63 or AL80 tanks?
STEVEN S Yes they fit all standard tanks
RICHARD M Yes, they fit AL80's. I used them for the XS mini back inflator system. However, I quickly switched out to a true tech backplate wing system. More money, but great fit and quality. Worth the investment.
JOHN S Yes. It does fit.. I used mine on a steel95 its okay..
PHILIP L I use these cam bands on steel 72's, which have a smaller diameter than AL 80's. Not sure what the diameter on AL 63's is, but I think the bands will work on them as there seems to be extra room on the velcro attachment surfaces for overlap. To reiterate, I have not used these on AL 63's, though. Good luck.
BRIAN J I installed them on a Zeagle Ranger and they fit my AL 80s just fine. Also work fine for my steel HP 80 andsteel LP 95.
JOHN T I've used them on AL80's (as well as steel tanks), and the length is fully adjustable so I see no reason why they wouldn't work on AL63's as well.
Joe M thanks for the reply. Very helpful.
JOHN T I just realized that your question was specifically about the SHORT cam bands; I have the STANDARD cam bands, which is what the subject of the email was. So just for clarity, I have NOT used the short cam bands and can't verify what tanks they'll fit -- although the descriptions says the short length is for 4.0" to 5.0" diameter cylinders, which sounds skinnier than regular tanks.
Sorry for any confusion!
Shopper What is the length difference between the large and the small cam bands?
LeisurePro S The short length fits 4.0" to 5.0" diameter cylinders and the large length fits 6.9" to 8.0" diameter cylinders.
Shopper What are the dimensions of these cam straps?
Shopper Hi! Will this band (small) fit my SeaQuest Libra, to hold my 4 litre 300 bar tank (it is 4.25" in diameter)? /Catrin ps. I?m Swedish, please excuse the spelling...I?m sure it?s incorrect somehow..
Warranty Information
This product has a limited warranty of 24 months.
www.xsscuba.com
(866) 977-2822
Whats in the box:Pair of Cylinder Cam Bands Tired of having to loosen the cam band each and every time you need to slide it over the top of your cylinder to mount your BCD, or even worse you have already mistakenly mounted your regulator before your BCD. Whichever the problem XS Scuba's unique cam band have a hoop/buckle to allow complete separation of the buckle from the strap webbing allowing you to wrap the band around the cylinder to mount, not having to slide it over the cylinder neck as with standard cam bands. Buckle is constructed from 316 stainless steel with higher lift on the rolling edge of the buckle to increase cam force; higher lift causes the buckle to snap into place eliminating unintentional release of the band assembly. Cam Band uses standard 2" (5.1 cm) Nylon Webbing and is easy to adjust to different cylinder diameters from 6.9" to 8.0" (17.5 to 20.3).
- XS Scuba Standard Cam Bands
- Injection-Molded Cam Buckles
- Molded from Nylon with Glass Fill
- Short Length for 4.0" to 5.0" (10.2 to 12.7 cm) Diameter Cylinders
- Standard Length for 6.9" to 8.0" (18.4 and 20.3 cm) Diameter Cylinders
- Webbing is 2" (5.1 cm) Wide Nylon with Velcro Hook and Pile
- Standard Length: 40" (101.6 cm)
- Short Length: 26" (66 cm)
- Sold in Pairs
| Materials | Band: Nylon Webbing
Cam Buckle: Nylon Glass Filled and Stainless Steel Wire
Velcro | | Cylinder Diameter | Short Length: 4.0" to 5.0" (10.2 to 12.7 cm)
Standard Length: 6.9" to 8.0" (18.4 and 20.3 cm) | | Band Dimensions | Short Length: 26" (66 cm)
Standard Length: 40" (101.6 cm)
Width: 2" (5.1 cm) | | Cam Buckles | Yes | | Weight [with packaging] | Small: 0.3 lb, Large: 0.85 lb |
- Easy to install
- Easy To Use
- Functional
- Inexpensive Alternative
- Well built
- Easy To Use
- Functional
- Lightweight
- Solid Construction
By SharkBait from Boston, MA - Easy To Use
- Functional
- Lightweight
- Solid Construction
- Easy To Use
- Functional
- Lightweight
- Solid Construction
- Easy To Use
- Functional
- Solid Construction
- Sturdy
|
|
Related products for XS Scuba Standard Cam Bands Small
|
Tired of having to loosen the cam band each and every time you need to slide it over the top of your cylinder to mount your BCD, or even worse you have already mistakenly mounted your regulator before your BCD. Whichever the problem XS Scuba's unique cam band have a hoop/buckle to allow complete separation of the buckle from the strap webbing allowing you to wrap the band around the cylinder to mount, not having to slide it over the cylinder neck as with standard cam bands... more
Tags: Xs Scuba,Xs Scuba Standard Cam Bands Large,General Accessories,Xs Scuba Tank Bands,Assorted Accessories,Xs Scuba Conversion Kit,Tank Bands Conversion Kit
|
When we travel we need extra padding and opaque bag wall construction to keep out those who might want what they see. When we get there we need well ventilated and fast drying. XS Scuba's Standard Mesh Duffel is the bag you are looking for once you get there. Packs down small and compact in your dive bag, yet once you have arrived allows you to transfer your gear into a large and effective mesh dive bag. Constructed from Heavy-Duty Mesh which is Strong, Durable, yet allows Wet Gear to Drip and Air Dry Quickly. When you're getting suited up you'll love its Smart Wide Bottom Design... more
Tags: Xs Scuba Standard Mesh Duffel,Xs Scuba,Standard Mesh Duffel,Mesh Duffel,Xs Scuba Mesh Duffel,Xs Scuba Duffel,Gear Bags,Add-on Gear
|
Ready to go to Saint Somewhere, XS Scuba's Standard Mesh Backpack Bag folds up compact for the traveling diver. Bag is constructed from Heavy-Duty PVC-Coated Nylon Mesh with a tough PVC-Reinforced Bottom Material; this bag will give you years of service. Gear is easily accessible with the Heavy Duty Draw String Top Opening. Bag is equipped with a convenient Outer Zippered Pocket for organization and for ease of transportation has Padded Adjustable Shoulder Straps complete with Adjustable Sternum Strap and a convenient Top Grab Handle... more
Tags: XSSBSMB, XS Scuba, Gear Bags, Add-On Gear, XS Scuba Standard Mesh Backpack (BG325)
|
XS Scuba's Standard Duffel Bag has a Huge 30" x 14" x 14" (76.2 x 35.6 x 35.6 cm) size, boasting a volume of 5,880 cubic inches (96.36 liters). Bag will fit a full set of gear plus some! Loading and unloading is made easy with the Easy Access U-Shaped Zippered Opening. Bag is equipped with a convenient Outer Side Pocket for items you need close at hand. You can put a Heavy Load in the Bag with the Full Wrap Around 2" (5.1 cm) for added strength Carry Straps with Padded Top Grab Handle with Velcro Closure... more
Tags: XSSSDF, XS Scuba, Gear Bags, Add-On Gear, XS Scuba Standard Duffel
|
This Back Pack Design is one of the original styles manufactured. Harness, Standard Hard-Plastic Pack with 2" (5.1 cm) Nylon Webbing Assembly, Soft Tank Band and Cam Buckle is Easy to Duff and Don. Waist and Shoulder Quick-Release Buckles are made from Corrosion Resistance Steel for durability and long life. Tank Back Pack is a great item for pool cleaning or working under a boat. Cylinder Cam Band is adjustable for use with 6.9" to 8.0" (17.5 to 20.3 cm) Cylinder Diameters.... more
Tags: XSSSB, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Standard Tank Backpack
|
XS Scuba's Pressure Gauge is a highly accurate Bourdon Tube Designed Gauge with a Built-in Thermometer. Gauge has red highlighted readings from 0 to 500 psi for safety reserve air. Thermometer Needle is brightly colored for ease of reading and the entire gauge face is Luminescent for ease of reading in low light or night conditions. Gauge is equipped with a 36" (91.4 cm) High Pressure Hose with 7/16" Threads and an Impact Resistant Rubber Gauge Boot. Pressure Gauge is covered by a 24 month limited warranty.... more
Tags: Essential Equipment,Xs Scuba,Gauges,Pressure Gauge,Xs Scuba Standard Pressure Gauge,Xs Scuba Gauge
|
Technical Divers need redundant safety back-ups on most all their equipment to assure the safest dive techniques allowed. A First-Stage Regulator should work well when it is maintained properly, yet if it does malfunction added safety features can make the difference between a controlled emergency and a diving accident. Incorporating a safety relief valve on your First-Stage regulator allow an over pressurization of the 2nd-Stage Hose nearly imposable. This Compact Over-Relief Valve (OPV) is designed to releases pressure in the event of an over pressurization of the first stage regulator... more
Tags: XSSSOPV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Standard Over-Pressure Valve
|
Pressure Gauge is a highly accurate bourdon tube design, reads pressure up to 420 bars and features a thermometer for temperature readings. The SPG has high visibility graphics with bright red from 0 to 50 bars reserve air and the gauge face is luminescent for easy reading in all light conditions. Pressure Gauge comes with a 91.4 cm (36") high pressure hose and is encapsulated in a Durable Thermoplastic Boot for added protection. Boot is equipped with two attachment points for a clip or lanyard.... more
Tags: XSSPGM, XS Scuba, Gauges, Essential Equipment, XS Scuba Standard Pressure Gauge, Metric
|
Tired of having to loosen the cam band each and every time you need to slide it over the top of your cylinder to mount your BCD, or even worse you have already mistakenly mounted your regulator before your BCD. Whichever the problem XS Scuba's unique cam band have a hoop/buckle to allow complete separation of the buckle from the strap webbing allowing you to wrap the band around the cylinder to mount, not having to slide it over the cylinder neck as with standard cam bands... more
Tags: XSSTBCB, Highland Millworks, General Accessories, Assorted Accessories, XS Scuba Tank Bands with Stainless Steel Cam Buckles (Pair)
|
You have an XS Scuba Standard Pressure Gauge or Brass & Glass Pressure Gauge (SKU's: XSSPG and XSSBPG) and want a Protective Rubber Boot. XS Scuba's Pressure Gauge Boot is designed for Gauges measuring approximately 2.5" x 1.0" (6.4 x 2.5 cm) in Diameter x Depth, and is made from Durable Thermoplastic Material with Left and Right Side Attachment Points for a Clip or Lanyard.... more
Tags: XSSPGB, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Pressure Gauge Boot for SKU's: XSSPG and XSSBPG
|
Looking for a hood that won't feel like it is strangling your neck when you wear it? XS Scuba's Standard 6 mm Nylon II Neoprene Hood can be the answer. This hood gives you the comfort you are looking for with a Super-Stretch neck section. The hood will keep you super warm with the skin-in" face seal which reduces water exchange at this important facial sealing area. The face seal will also allow a custom fit for the skirt of your mask by allowing it to be trimmed to meet your facial features perfectly... more
Tags: XSSSHSM, XS Scuba, Hoods, Exposure Protection, XS Scuba 6 mm Standard Hood Small
|
|
|