800.637.6880
212.645.1234
|
|
Xs-Scuba Quick-Release Single Weight Pocket
4
See More Similar
Scuba Weights and Belts »
|
|
Xs-Scuba Quick-Release Single Weight Pocket
|
List Price:
|
$13.00
|
|
Our Price:
|
$12.95
|
|
You Save:
|
$0.05
|
SKU:
XSSQRWP
In Stock
|
|
|
Questions about this item:
Jon J Can someone provide the dimensions of the pouch? Thanks.
STEPHEN M A 5 pound cast weightbelt lead fits perfect
PEDRO J M I do not have the dimensions on hand but I use 5 pounds weight and it fit like a glove.
I have 2 of them in the tank strap one in each side. It work great for me because I float a lot plus the wetsuit. I use 18 pounds, 4 pounds in each pocket of my BC and 5 pounds in each pouch with my tank strap. They work great!
KEVIN K approx. 3 3/4" wide The height can be variable to adjust for the different shape weights. From 4" to 5 1/2" approx.
Shopper hi
can it be fixed in Hollis sms100 (in the belt ) ?
and it will be fixed ir its going to move arround ?
MARTIN S this pocket fits any standard weight belt. As long as Hollis sms100 uses standard nylon webbing, then yes.
I have this pocket installed on an OMS comfort harness II and it works great...does not move or shift.
If you're worried about the pocket moving around, get a few weight stops and string one on each side of the pocket.
PATRICIA M Yes, it can be fixed on the harness belt. I have one integrated on one side and it is not removable. I only has about 3-4 inches of wiggle room and has caused no problems. The one I put on the other side is removable so when I do want it to stay put, I will rig it by putting a zip tie around the belt in front of it to stop it from moving or sometimes a cut tire tube slipped around the belt will keep it in place as well. Good Luck!
ROBERT G Looks like the Hollis SMS 100 harness uses standard 2 inch webbing, so these weight pockets should work just fine. I use them on my backplate rig. I keep them from moving around too much by pinning them close to the edges of the plate with belt slides, the kind with the teeth.
JOSEPH S I dont remember them sliding on my belt, but I would secure them anyway....
WILLIAM O It will move freely and easily on the SMS100 belt. I use 2 delrin 3 bar slides,one on each side to keep it where I want it.
BILLY N Fits 2" belt/webbing just fine. If there is room to slide, it will slide. Get some weight keepers to hold it in one place.
Warranty Information
This product has a limited warranty of 24 months.
www.xsscuba.com
(866) 977-2822
Do you teach diving, do you find the need for additional weight on certain dives, and is your trim in the water not exactly as you want it? All these need scan be met with XS Scuba's Quick-Release Single Weight Pocket. Pocket is great when teaching and you need to quickly add additional weight to a new student. When you change exposure suits or add layers of neoprene for warmth, or you keep leaning in one direction or the other when fining and want to correct you're trim. Pocket allows quick addition of up to 5 lbs of lead in each pocket just slide over the end of a webbing belt. Velcro release weight dump- pull out, then down to drop weight in an emergency. Pockets are also an easy addition to XS Scuba's weight belts or harness systems.
- Here is the one that everyone has been asking for
- Velcro release weight dump - pull out, then down
- Designed to add up to 5 pounds of bagged shot or hard weight
- Attaches by sliding over the end of any 2" webbing
- Easy addition to XS Scuba weight belt or other harness systems
- Perfect for adjusting your trim
- Color: black
| Weight Capacity: | Holds up to 5lbs. | | BC Model: | Fits any BC or weight belt with standard 2 inch webbing. | | Ditch-Able: | Yes. | | Materials: | Resin coated nylon webbing. | | Weight [with packaging] | 0.3 lb |
2/28/2013 4.0Good inexpensive weight pocket option 12/11/2012 5.0Great Product. Saved me a ton of $$$ By Kevin from North Florida By Scubacopper from Atlanta, GA
|
|
Related products for Xs-Scuba Quick-Release Single Weight Pocket
|
Do you teach diving, do you find the need for additional weight on certain dives, and is your trim in the water not exactly as you want it? All these needs can be met with XS Scuba's Quick-Attach Single Weight Pocket. Pocket is great when teaching and you need to quickly add additional weight to a new student. When you change exposure suits or add layers of neoprene for warmth, or you keep leaning in one direction or the other when fining and want to correct you're trim. Pocket allows quick addition of up to 5 lbs of lead in each pocket without having to slide over the end of a webbing belt... more
Tags: XSSQAWP, XS Scuba, General Accessories, Assorted Accessories, Xs-Scuba Quick-Attach Single Weight Pocket
|
Spear fishing takes concentration; unlike scuba diving a spear fisherman can't stop to adjust a loosening weight belt due to wet suit compression at depth. The Cressi Quick Release Rubber Weight Belt allows the serious spear fisherman to snug up the belt at the surface and forget it while fishing. The Elastic Rubber Weight Belt is manufactured with a High Stretch Rubber to keep your Weights Comfortably in proper position during Ascents and Descents... more
Tags: CSBQREB, Cressi, General Accessories, Assorted Accessories, Cressi Quick Release Rubber Weight Belt
|
Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, or maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your weight belt? Whatever you need to get more stability or comfort in diving from the lead weight this XS Scuba Single Tank Weight Pocket can help. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band, weight belt webbing or harness depending on where you want to hang the pocket... more
Tags: Xs Scuba Weight Pocket,Xs Scuba,General Accessories,Assorted Accessories,Xs Scuba Tank Pocket,Xs Scuba Single Weight Pocket Black,Tank Weight Pocket
|
This Unique Weight Pocket by XS Scuba is designed to be used in two ways. First it can be used with the XS Scuba Weight Belt (SKU: XSSWB) as an Add-On Pocket and it also can be used as a Trim Weight Attached to your Cylinder Cam Band. The Extra Velcro Loop attached to the Front Closure of the Pocket allows Excess Webbing from Cam Band to be attached to the front of the pocket, keeping your Profile more Streamlined. Pockets are built with 1000 Denier Cordura for Durability and Long Life. Double Needle Stitching adds to their Strength and Durability. Pockets hold up to 5 lbs (2... more
Tags: XSSSWPV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Single Weight Pocket with Velcro Front
|
Cressi's Flat Lock Weight Pockets are designed to fit the Cressi Back Jac, Aquaride Elite, Travelightand R-1 BCD's. This well designed Integrated Weight Pocket System can hold up to 10 lbs (4.5 kg) of Hard or Soft Lead Weights in each Pocket. The Pockets have a Unique Flat Lock Buckle System that is Extremely Low Profile in Design with Pivoting Pull Release Handles that can be Folded Inward to Lower the Divers Profile and Reduce Drag. The Positive Locking Buckle's will not Release the Weight Pocket unless you want them to... more
Tags: CSBWPF, Cressi, General Accessories, Assorted Accessories, Cressi Flat Lock Weight Pocket (Single Pocket)
|
Designed to adjust your trim when using a set of double cylinders, the XS Scuba V" Nylon Mesh Weight Pouch attaches to back-plates center groove with cylinder band bolts. Pouch is equipped with two stainless steel grommets 11" (27.9 cm) center-to-center for attachment and has a sealed opening with double Velcro closure to keep lead secure regardless of your body position underwater. Just pour in your lead shot up to7 lbs (3.16 kg). All seams are sewn for strength and durability... more
Tags: XSSWB550, XS Scuba, General Accessories, Assorted Accessories, XS Scuba "V" Weight Pouch (WB550)
|
New and improved! The release handle is now reversed and we've added a Velcro tab for extra security, keeping internal pouches from rolling when mounted horizontally. The 16lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. Designed for use with the TransPac harness, they can be worn vertically or horizontally with each pocket holding up to 8 lbs. of weight securely in position throughout the dive. Simple... more
Tags: DIV3216, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite 16LB QB Weight Pocket #AC3216
|
The 32lb Quick Buckle (QB) Weight Pockets consist of an insert pocket that easily releases when the handle is pulled and a holster that stays securely on the waist belt. The insert pocket has two compartments to separate heavy weights and keep them from slipping inside. Designed to be worn with the TransPac harness, the 32lb QB Weight Pocket is worn vertically with each pocket holding up to 16 lbs. of weight securely in position throughout the dive. Simple, top-loading pocket protects divers from an inadvertent buoyancy event by keeping weight securely in place... more
Tags: DIV3232, Dive Rite, Buoyancy Compensators, Essential Equipment, Dive Rite 32LB QB Weight Pocket #AC3232
|
If you're a working diver and can never get enough storage pockets to carry everything you need to work underwater XS Scuba has just what you have been looking for. The Highland by XS Scuba 2 mm Super Stretch Neoprene Pocket Shorts will give you plenty of extra storage and attachment points for everything you can come up with to attach to your gear. Shorts fit over your wet or dry suit are made of Super Stretch Neoprene Rubber with a Nylon Cord Draw String at the Waist with Barrel Lock for a Snug and Secure Fit... more
Tags: XSSNPSLR, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba 2 mm Super Stretch Neoprene Pocket Shorts Large
|
|
|