800.637.6880
212.645.1234
|
|
XS Scuba Miflex BC Quick Disconnect Hose, Black
4.5
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
XS Scuba Miflex BC Quick Disconnect Hose, Black 36"
|
List Price:
|
$58.00
|
|
Our Price:
|
$51.95
|
|
You Save:
|
$6.05 (10%)
|
SKU:
XSSQDH
In Stock
|
|
|
Questions about this item:
David L Does this hoses quick disconnect fir the Zeagle Octo Z? If not is there a 32" flexible hose that will fit?
Miyuki S This will not fit the Zeagle Octo Z. You would need a regular LP hose like the Phantom Standard 3/8 LP Regulator Hose SKU: ISCPLPH and the XS Scuba "EZ" QD Adapter Scuba Pro Style SKU: XSSQDH.
Jacek P Hi,
Will this hose work with Oceanic CDX5 first stage?
What size is best for Extra Small rental BCDs (person is 5' tall)?
Thank You,
JP
DAVID P Yes it will connect just fine. To get the correct hose lenght measure the BC inflator hose and add a few inches. More the likely 22 inches will be just fine with an extra small bc.
ROBERT C Yes, it will work fine.
RICHARD W Low Pessure connections are pretty standard depending on the BCD the quick connect may not fit. There are at least 3 diffrent connections depending on the make of BCD. The length also depends on weather there is a pull dump on the BCD.
jamey w Which length would be best to fit a Med Mares Dragon BC?
ROBERT C Likely a 24" ....
SEAN S You should measure it, there are too many variables. How hi or low do you wear your tank? How do you route your hose out of your first stage? How far down is your dump/inflater valve?
It is better to be a bit too long than too short so round up.
Takao K Is an adapter necessary whether this product can be connected to scubapro-air2?
In addition, does the length of the product include the length of the adapter?
TED K Yes you would need to purchase an adapter for a Scubapro Air2 and that would add length to the hose.
JESSE S Don't use q quick disconnect hose for an Air 2 set up. You need to buy a regulator hose of the length that you want. You can then remove the adapter from your old hose to the Miflex hose (or purchase a new adapter). The adapter is about 1" in length.
RANDALL A A The length is tip to toe, adapter inclusive. There is no need for a different adapter.
WARREN M I would not use this hose to connect to an air-2. There are adapters available separately but they sometimes leak or have problems sealing since you would have two quick disconnects at the end of the hose. I would buy the low pressure hose and an air-2 quick disconnect fitting that attaches to a standard low pressure hose fitting.
KEVIN K this is design for a bc and only a bc. air 2 has its own hose . i would never depend on a bc reg
Shopper Will the hose fit a Mares Abyss?
MATTHEW G LP and HP ports on regulators are usually standard, but you would be best served to check directly with the manufacturer. I have installed these on Poseiden, Aqualung, and Diverite first stages with no problems.
RICHARD W The hose fits what is called a standard quick connect which I believe Mares uses on all there equipment. So I do believe it should fit
TERRILL J Yes, you should have no problems. That is one thing I have found common to all regulators is that the connector size and threads that I have come across are all excatly the same and interchangeable. You can even use Brand "A" Regulator with Brand "B" 1st Stage, although not reccomended.
DAVID P Yes, it should work just fine.
jeff j will these hoses fit the aqualung balance and libra?
GARY T Sorry Jeff, not sure about if it fits your equipment. i had those questions and sought out a dive shop that sold the hoses. they helped a bit, but i also looked on the XS Scuba site that makes the hoses. after seeing the amount of adapters they make, I'm sure they have what it takes to make the connections you need. as far as the hoses themselves, i have dove with them several times since i had them installed and i love them. the best thing is the amount of movement. no more tension on my mouthpiece as i look around. they flex so good i was able to go with a shorter hose and still have great range of movement. they are very light and have a greater pressure capability as well. the extra expense should pay for itself since these are supposed to far outlast traditional hoses.
SEAN K Sea quest/ aqualung/ Scubapro usually use a proprietary hose fitting, not the standard fitting used by most other manufacturers.
KIM B It is a standard size. It did fit my Sherwood and Mares.
JOHNATHAN R Jeff,
Unless you have some weird connectors it should fit. It hooked up the the wife's aqualung lotus perfectly. I have had no problems with mine, and I think they make a world of difference for streamlining your equipment.
DANIEL F I don't think I can be much help here, but if those Aqualung BCDs only take a special QD adapter it might not work.
I have two of these and have used them non a Sherwood avid and have used it on zeagles, mares, and three different dry suits.
Shopper Can these be used for drysuit inflation?
SCOTT M I don't use a dry suit but if a regular inflator hose will fit on a dry suit inflator fitting then the answer would be yes.
I always use "hose helmets" on my BC inflator hoses to make them easier to grasp ion case of a run-away. With Miflex hoses I have to soak them in hot water and apply a lot of "elbow grease" to get them on. It was my understanding that most dry suit inflation hoses have little wings built into them for the same purpose.
ROBERT J sure can ! Hooks up to my DUI inflator nicely ! Just order the right length for your need.
JOE W They work great for standard connections ! There are some suits they do not work on like Poseidon that has a brand specific hose . So I would check first. This hose works great on my Andy's dry suit and is easy to disconnect with 5 mill. gloves.
JAMES R Yes it can - generally drysuit inflation connections are the same as regular BC connections.
ED W As long as the dry suit has the same quick-discconect inflator stem as almost all BCDs do, then yes, this would be a great hose for a dry suit inflator as well! - Ed.
Shopper Will this fit a Seaquest Black Diamond? (22")
ROBERT J Absolutely !
Length can be costumized to your needs or you can you the same lenght you already have.
ROBERT T Yes, I am using it n a Black Diamond and like it a lot!
katsutoshi s Can this hose be installed on the Mares ICON BC jacket?
SEAN K It should fit, I believe Mares has a generic QD fitting. I know that ScubaPro and SeaQuest (Aqualung) have proprietery fittings. Just remember that this is a thin hose, and it flexes alot more than rubber hoses.
GARY T Unless you have a non standard connection to your BC, this hose should fit.
DANIEL R Yes this hose will work just fine.
Personally, I don't think its worth the extra expense for a BC hose, just stick with the regular ones.
I will say, these hoses are great for regs and for the high pressure hose to your SPG.
JOHN D works ok on a Balance BCD.
WAYNE Y If the inflator is a standard size, then yes it will fit. These hoses are great compared to the stiff black rubber ones. You may want to measure for length to get a more custom fit.
RONALD H Yes Mares has no proprietary connector. Make sure the length is the same as your current one
GREGORY M Sorry, I don't know the answer to this exact question. I do know that it does not work with the conner=ctor on my airsource (but does with my inflator on my QDPro. I have not been able to find an adapter for the airsource which is frustrating because that's my travel rig and the reason I bought the myflex hoses in the first place.
FRANK V Sorry I have no idea. Thanks Frank
Shopper Can this hose be installed on the Mares ICON BC jacket?
WILLIAM L I'm not sure about the Mares BC but if it has a standard quick connect fitting it should work. I think the Miflex hoses are great. They are lighter, stronger, and pack smaller in your gear bag.
RICHARD C I currently use this hose on a SeaQuest Pro QD BCD, an Oceanic Tropical BC, and a Zeagle Ranger BC. As far as I know, it will fit on any standard Quick Disconnect BC. It will not fit, without an adapter, on any BC that has a regulator on the inflator (ie. Atomic SS1).
If Mares has a standard inflator fitting, this hose will work fine.
Hope this helps!
STEPHEN S I have a Mares jacket BC but not an ICON. I had no trouble connecting to my Mares BC.
STEPHEN S I have a Mares jacket BC, but not specifically an ICON. Had no trouble connecting to my Mares BC..
PETRA H Sorry, Don't know. We installed it on a Zeagle Concept and on a Seaquest BC.
Hope somebody can help you.
BETTY S I used mine on a Sherwood BC so if the connection is the same, which i think they are pretty standard, it should be fine. nice hose, i love mine, easy to pack.
Pete M Will this fit the USD Calypso?
RALPH M This item is for connecting to an indaflator. Not a regulator. You will need to measure your indaflator hose to get the proper length but it will connect to any indaflater.
TED K I have this on a Seaquest Diva so it should fit your USD Calypso on the connection. Not sure about the length for you, but was perfect for me. Love the hose!
STEVE E No idea if it will fit on a Calypso. Seems it should, these things
are pretty standard, but I used it on some SCUBA pro gear.
JOSEPH G Pete, I used mine on an OMS BCD. Check the connection on the OMS and see if they are the same type good luck
RICHARD W If it has a standardconnectot on it then it will fit.
Love these hoses will never go back to rubber
JACKIE P yes. It will fit all standard 1st stages. I've put it in a scubapro and aeris.
RON G I did a Google search on this BC and didn't find out much, it appears to be vintage design. If a standard BC inflate hose will fit the connection, the Miflex should too. I can only suggest trying the hose from a modern BC to see if it works before purchasing.
Shopper Will this hose fit an Apeks Octo Plus?
LeisurePro S This hose will not fit the Apeks octo; what you can do it order a regular Miflex hose here in a 24" or 26", and the Seaquest adapter which also fits the Apeks Octo Plus.
Shopper Will this hose fit the Zeagle Ranger?
LeisurePro S Yes, but you will need adapter AQUHA138 to connect the miflex hose to the ranger if you have the Octo-Z installed.
Shopper Will this hose fit the Oceanic Air XS 2?
LeisurePro S You will need this adapter for the miflex hose to work with the Air XS.
Shopper What is the standard length of Miflex hose that is bought for a BC?
LeisurePro S This depends slightly on personal preference as well as the size of the BCD, but the most standard length is around 22".
Shopper will these hoses work with the Atomic SS1?
Shopper will this hose fit a scubapro Air2? Thanks
Warranty Information
This product has a limited warranty of 24 months.
www.xsscuba.com
(866) 977-2822
Whats in the box:XS Scuba Miflex BC Quick Disconnect Hose Miflex Hoses feature a Patent Pending Double Nylon Safety Braiding Designed to Outperform and Outlive Traditional Rubber Hoses. Miflex Hoses are 30% Lighter than an equivalent length Rubber Hose and have unmatched Flexibility. You can tie a Miflex hose in a knot and be assured of continuous, uninterrupted airflow. Miflex Hoses have a Minimum Burst Pressure of 3600 psi (250 bar), more than twice rubber hoses. Every hose is subjected to more than 30 Performance and Safety Tests to receive the EN250 Certification. Hose fittings are manufactured from UNI 12164 CW 614N Chrome Plated Brass and the Hoses are Oxygen Cleaned from the factory. The Anatomy of the Miflex Hose is its secret to its Durability and Flexibility. The Double Braided Nylon Outer Jacket is Tightly Bound and Fixed to the Hose Inner Core. The Hose has an Inner Liner Layer of Polyester and a Polyurethane Compound Liner. These materials make the Hose Resistant to UV Rays out of the water extending the life span of the hose. The hose is available in 7 Lengths from 14" to 36" (35.6 to 91.4 cm)) and has an External Diameter of 0.47" (12 mm) with an Internal Diameter of 0.26" (6.5 mm). The Hose is shipped in Premium Packaging that can double as a Water Resistant Document Wallet and is covered by a 24 month limited warranty.
- XS Scuba Miflex BC Quick Disconnect Hose
- Patent Pending Double Nylon Safety Braiding Designed
- Inner Liner Layer of Polyester and Polyurethane Compound Liner
- Designed to Outperform and Outlive Traditional Rubber Hoses
- Fitting & Sleeves: UNI 12164 CW 614N Chrome Plated Brass
- Hose Resistant to UV Rays
- Minimum Burst Pressure of 3600 psi (250 bar)
- 30 Performance and Safety Tests
- EN250 Certified
- 30% Lighter than Equivalent Length Rubber Hose
- Unmatched Flexibility
- Average Lifespan: 3 Times Longer than Rubber Hoses
- Oxygen Cleaned from the Factory
- Kink-Resistant Design: Tie in Knot, Air Flow Unobstructed
- External Diameter: 0.47" (12 mm)
- Internal Diameter: 0.26" (6.5 mm)
- 7 Lengths: 14", 18", 22" 25" 29" 32" or 36" (35.6, 45.7, 55.9, 63.5, 73.7, 81.3 or 91.4 cm)
- Color: Black
- Premium Packaging Doubles as Water Resistant Document Wallet
- 2 Year Limited Warranty
| HP or LP | LP | | Materials | Outer Jacket: Double Nylon Braiding
Polyester and Polyurethane Compound Liners | | Length | Multiple: 14" to 36" (35.6 to 91.4 cm) | | Working Pressure | 500 psi (35 bar) | | Burst Pressure | 3600 psi (248 bar) | | OD | 0.47" (12 mm) | | Color | Black | | Quick Connect | Yes | | Weight [with packaging] | 18", 25", 29", 32", 36": 0.35 lb, 22": 0.4 lb, 14": 1.25 lb |
12/14/2012 4.0Lightweight and flexible - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
11/5/2012 5.0Smooth attack and detach. - Easy To Use
- Functional
- Improves Diving Experience
7/18/2012 5.0Less pressure on the mouth piece finally - Easy To Use
- Functional
- Improves Diving Experience
- Solid Construction
- Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Solid Construction
- Worry Free
- All Diving Applications
- Cold Water
- Professional
- Recreation
- Warm Water
By Joe from Santa Cruz, CA - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Solid Construction
- All Diving Applications
- Cold Water
- Professional
- Recreation
- Warm Water
|
|
Related products for XS Scuba Miflex BC Quick Disconnect Hose, Black 36"
|
Miflex Hoses feature a Patent Pending Double Nylon Safety Braiding Designed to Outperform and Outlive Traditional Rubber Hoses. Miflex Hoses are 30% Lighter than an equivalent length Rubber Hose and have unmatched Flexibility. You can tie a Miflex hose in a knot and be assured of continuous, uninterrupted airflow. Miflex Hoses have a Minimum Burst Pressure of 3600 psi (250 bar), more than twice rubber hoses. Every hose is subjected to more than 30 Performance and Safety Tests to receive the EN250 Certification... more
Tags: XSSQDH14, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Miflex BC Quick Disconnect Hose, Black 14"
|
XS Scuba Replacement Paintball Quick Disconnect Adapter fits on the SKU: XSSPBF Paint Ball Filler. QD is manufactured from Durable Rust Resistant Stainless Steel and works just like a BCD QD. One end of the Adapter has 1/4" NPT Male Threads with the opposite end with a Paint Ball Quick Disconnect Fitting. Easy to install and the QD Fitting makes it simple to use. Fitting has a 5,000 psi (350 bars) working pressure. Paint Ball QD Adapter is covered by a 24 month limited warranty.... more
Tags: XSSPBQDA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba, Paint Ball Quick Disconnect Adapter
|
If you have different Second Stage Regulators for different Rig Configurations and they are not always attached to your Low Pressure Hose, you might want to install a Quick-Disconnect (QD) fitting so you won't need to use a wrench. When you swap out Second Stage Regulators and are changing them out with a wrench any Repair Technician can tell you if it is not done correctly you can actually De-Tune your Regulator and not even know it! The Second Stage Regulators Critical Valve Seats usually seals against the Second Stage Inlet Fitting... more
Tags: XSSSSQD, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Second Stage Quick Disconnect
|
7.8mm Thin - 35% thinner than rubber hoses||Lightweight - Half the weight of rubber hoses||Factory cleaned and nitrox ready||FEMALE FITTING||7/16 x 20 female threads||Brass with electroless nickel plating||Strain relief with shock absorber||14mm deep airspool well||MALE FITTING||7/16 x 20 male threads||Viton o-ring||HOSE MATERIAL||New Graphite Carbon color||Less then 8mm diameter||Braided nylon exterior layer... more
Tags: XSSHPH24, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Miflex High Pressure Carbon Hoses 24"
|
|
|