800.637.6880
212.645.1234
|
|
XS Scuba Airwave Inline Octopus
4
See More Similar
Scuba Octopuses »
|
|
XS Scuba Airwave Inline Octopus
|
List Price:
|
$180.00
|
|
Our Price:
|
$159.95
|
|
You Save:
|
$20.05 (11%)
|
SKU:
XSSOAWI
In Stock
|
|
|
Questions about this item:
ALEXANDR K On the picture I see a rather big radiator. But is it suitable for cold water?
GARY P I used the regulator for warm water only. 75 degrees F or above. Cold water diving is a rare event. If you are diving in water that requires attention to the second stage to prevent it from freezing, you should get a second stage specifally designed for cold eater. This is equally true for your safety second stage. If costs is a problem look for used regs. The XS scuba reg is not designed for cold water use.
CATHERINE G I have used it in cold water and have not had any problems.
JEFFREY P I have never used the octo in cold water. My family has used 3 of these on about 80 dives in warm water, approximately 82 degrees with no problems.
Shopper What BCDs will this fit?
Paul D Correction, this should fit all BC's with a standard low pressure inflator hose connection, regardless of the diameter of the corrugated hose. This unit replaces the low pressure hose between the 1st stage and the inflator head unit.
LeisurePro S This will fit all standard hoses with an inside diameter of one inch.
Warranty Information
This product has a limited lifetime warranty.
www.xsscuba.com
(866) 977-2822
Whats in the box:XS Scuba Airwave Inline Octopus, LP Hose and Owner's Manual When you're taught how to dive you are given practice in buoyancy control more than any other skill. Once you start to dive every time you go underwater, fin the reef, or surface you use buoyancy control. All this time your octopus second stage regulator hangs un-used and out of mind. When a real life out-of-air situation occurs, the stress and anxiety mounts, and you find yourself fumbling for a piece of equipment you never use the Octopus! Combining your inflator devise (that you use on every dive) with your Octopus Regulator assures your ability to react properly when an Out-of-Air Emergency occurs. Be a safe diver with the XS Scuba AirWave Inline Octopus. Easy Breathing Octopus Regulator due to its Pneumatic Balanced Valve and Venturi Adjustment Switch, the AirWave Inline Octopus attaches easily to any standard BCD Inflator Mechanism and is ready to use. Not only is it Safer to use then a standard Octopus Regulator, it also eliminates a Hose, Streamlining the divers Profile and can Reduce Drag in the water. The Airwave Octopus comes equipped with a 3/8" Threaded 20" (50.8 cm) Hose for attachment to a Low Pressure (LP) Port of your First Stage Regulator. This Sleek and Compact Octopus Regulator has a Hi-Viz Neon Yellow Full Activation Purge Cover for easy Identification in an Out-of-Air Emergency Situation. The Octopus comes with Comprehensive Owner's Manual and is covered by a Limited Lifetime Warranty.
- XS Scuba Airwave Inline Octopus
- Replaces Standard Octopus Regulator
- Lightweight and Compact Design
- Eliminates Octopus Hose
- Increased Safety through Constant Use by Divers
- Combines 2 Functions in 1
- Ready to Mount on BCD
- Add Safety to Diving
- Reliable, Safe Design
- Unique, Free Flow Preventing Adjustment
- Exceptional Breathing Performance
- Hi-Viz Neon Yellow Full Activation Purge Cover
- Pneumatically Balance Downstream Valve Design for Performance
- Easy Breathing Octopus Regulator
- 20" (50.8 cm) Hose
- Hose Thread: 3/8"
- Comprehensive Owner's Manual
- Limited Lifetime Warranty
| Adjustable 2'nd Stage | Yes | | 2'nd Stage Type | Pneumatic Balanced Downstream Valve | | Hose Thread | 3/8" | | Hose Length | 20" (50.8 cm) | | Weight [with packaging] | 1.25 lb |
10/4/2012 4.0Everything I need; nothing I don't... - Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Eliminating Hoses
- Last Resort
- Upgrading Equipment
- With Nitrox
- Diving Type:
- Night Diving, Open Water Diving, Wreck Diving
- Was this a gift?:
- No
- Comfortable Mouthpiece
- Does Not Leak
- Easy To Connect
- Easy To Use
- Reliable
- Slim Design
- Eliminating Hoses
- Upgrading Equipment
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Rescue Diving, Wreck Diving
By Jon from Grand Haven, MI - Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Diving Type:
- Cave Diving, Drift Diving, Night Diving, Open Water Diving
By Larry from Sausalito, CA - Nitrox Compatible
- VERY streamlined
- Can't offer to buddy
- Causes Jaw Fatigue
- Hose too short
By Bosco from roseville,ca. About Me Advanced Diver, Recreational Diver - Cold Water
- Recreation
- Warm Water
|
|
Related products for XS Scuba Airwave Inline Octopus
|
Highland by XS Scuba's Deluxe Inline Shut-Off is an inline valve that can be used for closing off the air flow to your second stage regulator or inflator mechanism for a dry suit. Easy to install on standard hoses placed between the hose and the second stage regulator or between the first stage regulator and power inflator hose for quick and easy shut-off of air or to allow air flow to continue. Highly Visible Red Colored Visual Indicator of closed position and Green Colored Visual Indicator of open position. Just slide the Knurled Slide Collar to Shut-Off or Turn-On Gas Flow... more
Tags: XSSDIS, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Deluxe Inline Shut-Off
|
So where is your octopus during the dive? Is it trailing along in the water behind you? Can you find it in an emergency? Can you find it at all? XS Scuba has addressed that problem by developing the AltAir. The AltAir utilizes the same Patented Quick-Release Buckles used on today's most modern Weight-Integrated BC's. Snap the AltAir in place to the BC and forget about it. If you need it, it will be there...every time. Even after a giant stride from a 20' (6.1 meters) tuna tower...it's still there. Yet... more
Tags: Essential Equipment,Alt Air Octopus,Xs Scuba,Octopuses,Octopus,Xs Scuba Air Octopus,Xs Scuba Alt Air Octopus Open Box/Demo,Xs Scuba Octopus
|
The AirWave is designed with the Philosophy that the best way to assist an Out-of-Air Diver is to give them your Octopus. Therefore, the Hose Orientation is designed to be on the diver's right side so the AirWave can be given to an out-of-air diver without the need for "S" turns. This Unique Mouthpiece Orientation is the Reverse of many Octopuses but truly is the Best Design. The Adjustment Feature allows the diver to change the direction of the air flow to prevent any Annoying Free Flow... more
Tags: Xs Scuba,Octopus,Used: Xs Scuba Airwave Octopus,Xs Scuba Airwave,Airwave Octopus,Xs Scuba Octopus
|
The AirWave is designed with the Philosophy that the best way to assist an Out-of-Air Diver is to give them your Octopus. Therefore, the Hose Orientation is designed to be on the diver's right side so the AirWave can be given to an out-of-air diver without the need for "S" turns. This Unique Mouthpiece Orientation is the Reverse of many Octopuses but truly is the Best Design. The Adjustment Feature allows the diver to change the direction of the air flow to prevent any Annoying Free Flow... more
Tags: Essential Equipment,Xs Scuba,Octopuses,Octopus,Xs Scuba Airwave,Airwave Octopus,Xs Scuba Airwave Octopus,Xs Scuba Octopus
|
Highland by XS Scuba's Inline Shut-Off is an inline valve that can be used for closing off the air flow to your second stage regulator or Re-Breather. Easy to install on standard hoses placed between the hose and the first stage regulator for quick and easy shut-off of air or to allow air flow to continue. Just slide the Knurled Slide Collar to Shut-Off or Turn-On Gas Flow. Slide is made from Durable Machined Delrin and the Ribbed Texture makes it easy to operate even when wearing gloves. Inline Shut-Off has 3/8-24 UNF Male Inlet to 3/8-24 UNF Female Outlet Threads... more
Tags: XSSISF, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Inline Shut-Off at First Stage
|
Highland by XS Scuba's Inline Shut-Off is an inline valve that can be used for closing off the air flow to your second stage regulator or inflator mechanism for a dry suit. Easy to install on standard hoses placed between the hose and the second stage regulator or between the first stage regulator and power inflator hose for quick and easy shut-off of air or to allow air flow to continue. Just slide the Knurled Slide Collar to Shut-Off or Turn-On Gas Flow. Slide is made from Durable Machined Delrin and the Ribbed Texture makes it easy to operate even when wearing gloves... more
Tags: XSSISS, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Inline Shut-Off at Second Stage
|
This Handy Adapter allows you to attach a Mini Tech Gauge by XS Scuba (SKU's: XSSMTG and XSSMTGM) to the end of a High Pressure Hose. Inline Gauge Adapter is a great item for a Low Cost, Low Profile Pressure Gauge for Stage Bottles or Redundant Air Supply set ups. Adapter allows Inline (180°) connection with the HP Hose. Inline Adapter is made from Chrome Plated Brass for Durability and Long Life. Inline Adapter comes equipped with an Air-Spool with Viton O-rings so it's Nitrox Compatible.... more
Tags: XSSIGA, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Inline Gauge Adapter
|
Having a redundant air supply in an emergency can make either a self rescue or that of your buddy safer and easier then sharing air or octopus breathing. XS Scuba's Pony Bag utilizes your BCD Cylinder Straps and connects your Redundant Air Supply to your Primary Diving Cylinder. The Pony Bag is equipped with a Bottom Strap that adds stability for a more secure feel when moving through the water. Your Pony Bottle won't go anywhere with the Dual Velcro Straps that keep the Pony Bottle Secure... more
Tags: XSSPB10, XS Scuba, Boots, Exposure Protection, XS Scuba 7 mm Pyrostretch No-Zipper Boots 10
|
|
|