800.637.6880
212.645.1234
|
|
Highland by XS Scuba Brass/Glass Pressure Gauges
5
See More Similar
Scuba Gauges »
|
|
Highland by XS Scuba Brass/Glass Pressure Gauges 2.0" PSI
|
List Price:
|
$80.00
|
|
Our Price:
|
$71.95
|
|
You Save:
|
$8.05 (10%)
|
SKU:
XSSBPG
In Stock
|
|
|
Questions about this item:
Laurie T How thick is this gauge (the 2" diameter size)? The boot that is suggested for this gauge indicates that it accepts a 1" thick gauge. This doesn't look that thick?
Rafa S The gauge is 1 Inch thick!
ROBERT B Laurie, my gauge is 1" thick.
TIMOTHY K You really don't need a boot for these gauges. I use them naked on my twin set and two stage bottles. Buy the hoses separtely based on your spec's. My twin HP hose is a 24 inch skinny kevlar hose I dog clip to a d-ring. I use 6 inch kevlar HP hoses for the stages and loop the hose back on itself (tied down with cave line). They get banged around a lot in the back of the 4x4 getting to back country dive sites and haven't had any problems with durability.
TIMOTHY K My Highland guage is 1" thick.
JOHN D I didn't want to ignore you but my reg is in the shop for maintainance so I can't measure it right now. When I get back I will check its dimensions.
John
Laurie T John,
Thanks...no need to reply further....I'll likely just use the guage w/o a boot...
ANDREY Y I personally never use a boot because if a hose or o-ring ever leaks the boot hides the source of leakage, plus shiny backside of the bare gauge may help as a backup signal mirror. It just needs a bolt-clip tied to the hose near the gauge for retention. However the mentioned thickness of 1" sounds to be correct - this pressure gauge is about that thick. Sorry, not exactly an answer but this is my best.
ANDREY Y I personally never use a boot because if a hose or o-ring ever leaks the boot hides the source of leakage, plus shiny backside of the bare gauge may help as a backup signal mirror. It just needs a bolt-clip tied to the hose near the gauge for retention. However the mentioned thickness of 1" sounds to be correct - this pressure gauge is about that thick. Sorry, not exactly an answer but this is my best.
DAVID S yes it is, nice piece of equipment. feels solid, if you bounced it off the boat deck it would not hurt it, I dont use the boot. Where did you find it?
Laurie T Leaisure Pro has it for sale....both the boot and the gauge.
Gustavo C Laurie T: I just bought one of this gauges and I can tell you that is 1" Thick. Now, let me give you this advice: don?t put it into a boot, use it naked, just the way it is. A boot isn?t really necessary and also increase its volumen and therefore drag. In addition a boot traps salt crystal that can damage the gauge. I hope this helps! Regards, Gustavo
JOHN B Yes it is thick. Your right it doesn't appear that way in the photos but is is a thick gauge.
MICHAEL S I would have to pull it out of the boot to measure it but it fit in a standard boot that used to contain a 2 " OMS gauge
SUSAN H Hi Laurie.
Yes these guages are about an inch thick.
Regards
Steve
MICHAEL P It's not in front of me right now, but it's about 7/8" +\- I use them without the boots.
Laurie T Thanks,
What I'm looking for is a backup SPG (I use a hoseless UWATEC Galileo Luna). I would like a compact SPG with a boot but everyone I see has a "standard" length HP hose. I would like to put it on a 21" hose. I used to use a mini pony bottle gauge directly on my 1st stage but it got banged and broke, so I've decided to get a backup that I can keep out of the way but can check it if the transmitter on the Luna fails. This looks like it would do the trick (it seems to be of high quality) if its not to "sloppy" in the boot. I guess I could just stick in some backing if the gauge doesn't fill the boot.
MICHAEL P it'll fit the boot. i wouldn't worry about that. If it seems a little to small put a slice of bike innertube around the edge and it will tighten it up enough to remove any front to back and/or side to side slop.
Shopper What is its diameter?
LeisurePro S This has a diameter for 2".
Warranty Information
This product has a limited warranty of 24 months.
www.xsscuba.com
(866) 977-2822
Whats in the box:Highland by XS Scuba Brass/Glass Pressure Gauges with Air-Spool Looking for a Durable Scratch-Resistant Pressure Gauge as a replacement or a back up for your Save-A-Dive Kit? XS Scuba's Triple Nickel-Plated Brass Cased with Tempered Glass Lens Pressure Gauge is what you need. Gauge reads from 0 to 5,000 psi or 0 to 350 bars, has a Simple Unobstructed White Faced Dial for easy reading. The Air-Spool is equipped with Viton O-Rings for Oxygen Compatibility. Gauge has a Built-In Over-Pressure Relief Valve for added Safety and the Gauge Face is Luminescent for easy ready in low light or night diving conditions. Gauge has a Wide 270? Sweep for Accuracy. Gauge is manufactured in Italy and is covered by a 24 month limited warranty. HP Hose and Gauge Boot sold separately.
- Highland by XS Scuba Brass/Glass Pressure Gauge
- Compact and Robust Quality Pressure Gauge
- Nickel Plated Brass Housing
- Tempered Glass Lens
- Ready to Mount to HP Hose
- Air-Spool included with Viton O-Rings
- Luminescent Gauge Face
- Wide 270º Sweep
- Pressure Readout (psi): 0 to 5,000 psi
- Pressure Readout (bars): 0 to 350 bars
- Bright, White Face - Easy to Read
- Built-In Over-Pressure Relief for Safety
- HP Hose Sold Separately
- Manufactured in Italy
- 2 Size Choices: 2.0" or 2.5" (5.1 or 6.4 cm)
- 2 Year Limited Warranty
| Materials | Case: Nickel Plated Brass
Lens: Tempered Glass | | Readout | PSI: 0 to 5,000 psi
Bars: 0 to 350 bars | | Fluorescent Dial | Yes | | 2.0" Weight [with packaging] | PSI, BAR: 0.45 lb | | 2.5" Weight [with packaging] | PSI: 0.55 lb, BAR: 0.6 lb |
8/20/2012 5.0Highland gauges the best for tec divers By Submarine hunter from Ontario Canada - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Solid Construction
- All Diving Applications
- Cold Water
- Professional
- Recreation
- Warm Water
- Easy To Use
- Functional
- Solid Construction
|
|
Related products for Highland by XS Scuba Brass/Glass Pressure Gauges 2.0" PSI
|
Looking for a Durable Scratch-Resistant Pressure Gauge as a replacement or a back up for your Save-A-Dive Kit? XS Scuba's Triple Nickel-Plated Brass Cased with Tempered Glass Lens Pressure Gauge is what you need. Gauge reads from 0 to 5,000 psi or 0 to 350 bars, has a Simple Unobstructed White Faced Dial for easy reading. The Air-Spool is equipped with Viton O-Rings for Oxygen Compatibility. Gauge has a Built-In Over-Pressure Relief Valve for added Safety and the Gauge Face is Luminescent for easy ready in low light or night diving conditions. Gauge has a Wide 270? Sweep for Accuracy... more
Tags: XSSBPG25, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Brass/Glass Pressure Gauges 2.5" PSI
|
Highland by XS Scuba Mini Tech Pressure Gauge is a great gauge for Technical Diving, Deep Diving and Overhead Environment Diving activities. Gauge is small and compact measuring only 1.1" (2.8 cm) in Diameter, .88" (2.2 cm) Thick and can be mounted directly into a High Pressure (HP) Port of a First Stage Regulator or on the end of a High Pressure Hose. Gauge is especially advantageous when used with Stage Bottles, Decompression and Safety Stop Bottles where a full size Pressure Gauge is not necessary... more
Tags: XSSMTG, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Mini Tech Pressure Gauge
|
Highland by XS Scuba Mini Tech Pressure Gauge is a great gauge for Technical Diving, Deep Diving and Overhead Environment Diving activities. Gauge is small and compact measuring only 2.8 cm (1.1") in Diameter, 2.2 cm (.88") Thick and can be mounted directly into a High Pressure (HP) Port of a First Stage Regulator or on the end of a High Pressure Hose. Gauge is especially advantageous when used with Stage Bottles, Decompression and Safety Stop Bottles where a full size Pressure Gauge is not necessary... more
Tags: XSSMTGM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Mini Tech Pressure Gauge, Metric
|
If you own an Highland by XS Scuba (SKU: XSSBPG) Brass/Glass 2" (5.1 cm) diameter Submersible Pressure Gauge and need to replace the Protective Boot or add one, this is what you're looking for. Boot adds Impact Resistance and Protection to the Gauge and also is equipped with an Eyelet for attachment of a Lanyard or Clip.... more
Tags: XSSBSPGB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Brass/Glass SPG Protective Boot
|
Need a new Gauge for your Cylinder Pressure Checker? XS Scuba's Fill Checker Pressure Gauge Module is an Easy Read 2.75" (7 cm) diameter Gauge, has a Black Face with White Pressure Readings in psi and Blue Pressure Readings in bars. The Gauge Reads Pressure from 0 to 5,000 psi (0 to 350 bars). The Gauge has a Stainless Steel Case, has an Accuracy of 1.5% throughout the Full Range of Pressure. Gauge is Liquid Glycerin Filled for Dampening and Shock Resistance. The Fill Checker Gauge has 1/4" Male NPT Threads and is designed for Above Water Use Only... more
Tags: XSSPGMD, XS Scuba, Gauges, Essential Equipment, XS Scuba Fill Checker Pressure Gauge Module Only
|
Highland by XS Scuba's Thin Line Pressure Gauge is a Compact, Thin, and High Quality Pressure Gauge that's built to last! The Gauge Housing is manufactured with Nickel-Plated Brass and is equipped with a Durable Lexan Lens for years of Reliable Service. SPG is ready to mount directly to a high pressure hose with its included Air-Spool with Viton O-rings. The Pressure Gauge has a Bright White Face that is Luminescent, so it's easy to read both in bright or low light conditions. Gauge has a Wide 240º Sweep from 0 to 5000 psi. The Gauge measures 5.1 x 1.9 cm (2" x 0... more
Tags: XSSTLSPG, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Thin Line SPG
|
Highland by XS Scuba's Thin Line Pressure Gauge is a Compact, Thin, and High Quality Pressure Gauge that's built to last! The Gauge Housing is manufactured with Nickel-Plated Brass and is equipped with a Durable Lexan Lens for years of Reliable Service. SPG is ready to mount directly to a high pressure hose with its included Air-Spool with Viton O-rings. The Pressure Gauge has a Bright White Face that is Luminescent, so it's easy to read both in bright or low light conditions. Gauge has a Wide 240º Sweep from 0 to 420 bars. The Gauge measures 5.1 x 1.9 cm (2" x 0... more
Tags: XSSTLSPGM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Thin Line SPG, Metric
|
You have an XS Scuba Thin Line Pressure Gauge (SKU's: XSSTLSPG or XSSTLSPGM) and want a Protective Rubber Boot. XS Scuba's Protective Boot for Thin Line SPG is designed for Gauges measuring approximately 2" x 0.75" (5.1 x 1.9 cm) in Diameter x Depth, and is made from Durable Thermoplastic Material with Left , Right Side and Top Attachment Points for a Clip or Lanyard. Protective Boot is available in Black or Green for Enriched Air Identification.... more
Tags: XSSTLSBBK, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Protective Boot for Thin Line SPG Black
|
Highland by XS Scuba's DuoKev Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Pressure Gauge has a Chromed Brass Housing for Strength and Durability, a Luminescent Gauge Face for Easy Reading when Night Diving or in Low Light Conditions. This Compact Gauge measuring a mere 1.96" (5 cm) in Diameter and .55" (1.4 cm) Thick. Gauge has Readout of 0 to 5,000 psi and the Air-Spool comes standard with Viton O-rings so it's Nitrox Ready... more
Tags: XSSDTGC, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba DuoKev Two Gauge Console
|
Highland by XS Scuba's DuoKev Two Gauge Console is a low profiled and ergonomically designed to fit in the hand comfortably, and is easy to read at a glance with its outstanding graphics. The Pressure Gauge has a Chromed Brass Housing for Strength and Durability, a Luminescent Gauge Face for Easy Reading when Night Diving or in Low Light Conditions. This Compact Gauge measuring a mere 5 cm (1.96") in Diameter and 1.4 cm (.55") Thick. Gauge has Readout of 0 to 420 bars and the Air-Spool comes standard with Viton O-rings so it's Nitrox Ready... more
Tags: XSSDTGCM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba DuoKev Two Gauge Metric Console
|
Highland by XS Scuba's Depth Gauge Capsule is a Compact Gauge measuring a mere 1.95" (5 cm) in Diameter and .90" (2.3 cm) Thick. This very accurate Oil Filled Depth Gauge reads depth from 0' to 220' and comes equipped with a Maximum Depth Indicator Needle. The Maximum Depth Indicator Needle is pushed by the Gauge Depth Needle until the diver meets their maximum depth and will remain there for the duration of the dive to indicate the divers Deepest Depth Reached during the dive. This feature allows the diver to not record that depth while actually diving... more
Tags: XSSDGC, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Depth Gauge Capsule
|
|
|