800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
3/8" Male to 3/8" Female with Swivel, Regulator Adapter
SKU:
AQUHAA46
In Stock
|
|
|
Questions about this item:
Shopper has anyone had problems with this fitting leaking ???
DARBY R Hello,
No, I didn't have any problem with it leaking. Is it coming from the "o-ring" at the base, or from the swivel? If the swivel, take it off the reg, and press the shaft out and check the "o-rings" in side, there should be two. Sometimes, they can get cut/torn during assembly. A little silicone grease on it before re-assembly helps with this.
Hope this helps,
Darby Reid
RLTW
IOANNIS B I never had a problem with it , all I had to do is lubricate the o rings and check it before and after a dive.
HARRISON B I have had no trouble through 16 months and almost 40 dives.
DANIEL L None at all thus far, I have had it for less than a year and have regular use (swiveling) with it over about 75 dives, including surviving international baggage handling. As this ages I have an eye to the o-rings which appear to be easy to self replace. I use this for a dry suit inflator to route the hose, I am more comfortable with that use as opposed to breathing air supply. The Omni-Swivel brand are best, I have both and with I only had Omni-Swivel.
JUDI S I have had this for over 6 years now without a problem. I just make sure each year I grease or change the o-ring.
Whats in the box:Adapter with Hose O-Ring Tired of your Second-Stage Hose Tugging at your Mouth when you turn your head? Using a Swivel Adapter can eliminate this Annoying Problem. Your Second-Stage Hose will have a lot more Maneuverability when attached to a Swivel. Swivel is made of Corrosion Resistant Marine Chrome Plated Brass for Strength and Durability comes with Standard Hose O-Ring so it's ready for installation.
- 3/8" Male to 3/8" Female with Swivel, Regulator Adapter:
- Reduces Tugging at Mouth of 2'nd Stage LP Hose
- Increased Head Maneuverability
- Corrosion Resistant Construction
- Material: Marine Chrome Plated Brass
- Strong and Durable Design
- Complete with Standard Hose O-Ring
| HP or LP | LP | | Materials | Chrome Plated Brass | | Thread Size | 3/8" Male to 3/8" Female | | Purpose | Swivel for 1'st Stage Port to LP Hose | | Weight [with packaging] | 0.2 lb |
|
|
Related products for 3/8" Male to 3/8" Female with Swivel, Regulator Adapter
|
Tired of your Console or Pressure Gauge Hose not allowing you to properly Read your Gauges or Navigate? Wish it was just a little more Maneuverable? Using a Swivel Adapter can eliminate this annoying problem. Your Console or Submersible Pressure Gauge (SPG) Hose will have a lot more Maneuverability when attached to a Swivel. Swivel is made of Corrosion Resistant Marine Grade Chrome Plated Brass for Strength and Durability comes with Standard Hose O-Ring, making for ready for installation.... more
Tags: General Accessories,Assorted Accessories,7/16" Male to 7/16" Female with Swivel, Regulator Adapter,Swivel,Aqua,Aa47
|
Need more LP Ports on your regulator? Have a vintage regulator with fewer LP ports? This handy adapter gives you three more low-pressure female threaded ports for attachment of additional low pressure hoses such as inflator hoses for a BCD, dry suit, or additional second stages. Adapter has 3/8" male threads which will screw into any standard regulator low-pressure port. Adapter is made from corrosion-resistant marine grade chromed brass.... more
Tags: General Accessories,Regulator Hose Fitting,Aa53,Assorted Accessories,Hose Fitting,Regulator Hose Fitting (3) 3/8" Females (1) 3/8" Male (Aa53),Aqua
|
Still diving with that old regulator? Did your 3/8" pressure gauge hose die and you can't find a 3/8" replacement hose? Don't retire your trusted pal just because all pressure gauges now have 7/16" hoses. This adapter is just the item you need to prolong the life of your trusty old regulator. Adapter has 3/8" male threaded end that will fit your older model First-Stage with 7/16" female to accept the new HP hose standard. Adapter is made of marine chrome plated brass for strength and durability and comes with standard hose O-ring so it's ready for installation.... more
Tags: General Accessories,3/8" Male to 7/16" Female Regulator Adapter (Aa51),Assorted Accessories,Aqua,Aa51,Regulator Adapter
|
Need to attach a 1/2" Male End Hose to your First-Stage regulators 3/8" Port? This Hose Adapter is what you will need. Adapter is made of Marine Chrome Plated Brass for Strength and Durability comes with standard Hose O-Ring so it's ready for installation. Adapter makes a Great Save-a-Dive Kit Item.... more
Tags: General Accessories,Assorted Accessories,Aa49,Aqua,Regulator Adapter,3/8" Male to 1/2" Female Regulator Adapter
|
Need to reduce the thread size of a 3/8" Male Threaded Scuba Regulator Low Pressure Hose to 1/4" Thread? XS Scuba's Stainless Steel 3/8-24 Female to 1/4" Male NPT Adapter can make this work. Adapter allows you to attach a standard Scuba Regulator LP Hose to smaller threaded requirements with a durable and corrosion resistant Stainless Steel Constructed Adapter. This XS Scuba Adapter is designed for use with Low Pressure below 200 psi (13.8 cm).... more
Tags: XSSA3, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Stainless Steel Adapter 3/8-24 Female to 1/4" Male NPT
|
Do you have a First Stage Regulator that has 1/2"-20 Low Pressure Ports and want to attach a Standard 3/8"24 Low Pressure Hose? This adapter allows the connection of a Standard Low Pressure Regulator Hose or Inflation Hose (3/8-24) into a large size Regulator First Stage Low Pressure Port (1/2-20). This Durable Corrosion Resistant Black Finish Chrome Plated Brass Adapter with Viton O-ring is what you are looking for. Designed for Low Pressure Only below 200 psi (13.8 bars) and Factory Cleaned so it's ready for Nitrox this Adapter makes a Great Save-a-Dive Kit item.... more
Tags: XSSLPPA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba LP Port Adapter 1/2" Male to 3/8" Female
|
Some regulators have 1/2" Ports on the first-stage for high-flow hoses, but all dive resorts usually carry only the minimum in spare parts, so don't lose out on a vacation dive because you now need to hunt the entire island for the right size hose. This adapter will get you out of trouble in a pinch. Adapter threads into your regulators high-flow port reducing it to a standard 3/8" port in a second. Adapter is made of marine grade chrome plated brass for long life and durability. At times, you can never find the one you need. That is, unless your source is Leisure Pro.... more
Tags: General Accessories,Aa48,1/2" Male to 3/8" Female Regulator Adapter,Assorted Accessories,Aqua,Regulator Adapter
|
Phantom Double braided Hose, The flexible, durable, light weight dive hose that lets you forget it's there! The braided polyester design results in lightweight, pliable regulator hoses that provide a much more enjoyable scuba experience and reduces jaw fatigue. They are durable, compact and much easier to pack in a regulator bag than a traditional rubber hose. The Regulator/BCD inflator hoses are rated to 1500 psi working pressure and 6000psi burst pressure . Standard BCD Inflator Hose 3/8-24 UNF Male, 9/16-18 UNF Female, 1500psi working pressure 6000psi burst... more
Tags: ISCPLPHBK22, Aqua, General Accessories, Assorted Accessories, Phantom Standard 3/8 LP Regulator Hose 22" Black
|
|
|