800.637.6880
212.645.1234
|
|
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
3/8" Male to 1/2" Female Regulator Adapter
SKU:
AQUHAA
In Stock
|
|
|
Questions about this item:
Shopper Is this pipe thread or inverted flare?
WILLIAM J This is not a tapered thread. It is 3/8-24 to 1/2-20, I believe. They are standard SCUBA sizes for low pressure regulator connections. These are standard SAE bolt sizes, both sides fine thread, not the most common thread which is more coarse. They are sealed by o-rings on both sides.
CHRIS K If you look closely at the picture, you can see an oring on the 3/8 side and a smooth seat for another oring on the 1/2 side. These are machine thread (i.e. the threads DO NOT taper) and are air/water tight via the orings.
BOB H this is the inverted flare. a regular hose end (3/8 Male), and large first stage port on some regulators (1/2 female).
Whats in the box:3/8" Male to 1/2" Female Regulator Adapter Need to attach a 1/2" Male End Hose to your First-Stage regulators 3/8" Port? This Hose Adapter is what you will need. Adapter is made of Marine Chrome Plated Brass for Strength and Durability comes with standard Hose O-Ring so it's ready for installation. Adapter makes a Great Save-a-Dive Kit Item.
| HP or LP | LP | | Materials | Chromed Brass | | Thread Size | 1/2" Male to 3/8" Female | | Purpose | Converts 1'st Stage 3/8" Port to 1/2" Second Stage Hose | | Weight [with packaging] | 0.1 lb |
|
|
Related products for 3/8" Male to 1/2" Female Regulator Adapter
|
Still diving with that old regulator? Did your 3/8" pressure gauge hose die and you can't find a 3/8" replacement hose? Don't retire your trusted pal just because all pressure gauges now have 7/16" hoses. This adapter is just the item you need to prolong the life of your trusty old regulator. Adapter has 3/8" male threaded end that will fit your older model First-Stage with 7/16" female to accept the new HP hose standard. Adapter is made of marine chrome plated brass for strength and durability and comes with standard hose O-ring so it's ready for installation.... more
Tags: General Accessories,3/8" Male to 7/16" Female Regulator Adapter (Aa51),Assorted Accessories,Aqua,Aa51,Regulator Adapter
|
Need more LP Ports on your regulator? Have a vintage regulator with fewer LP ports? This handy adapter gives you three more low-pressure female threaded ports for attachment of additional low pressure hoses such as inflator hoses for a BCD, dry suit, or additional second stages. Adapter has 3/8" male threads which will screw into any standard regulator low-pressure port. Adapter is made from corrosion-resistant marine grade chromed brass.... more
Tags: General Accessories,Regulator Hose Fitting,Aa53,Assorted Accessories,Hose Fitting,Regulator Hose Fitting (3) 3/8" Females (1) 3/8" Male (Aa53),Aqua
|
Some regulators have 1/2" Ports on the first-stage for high-flow hoses, but all dive resorts usually carry only the minimum in spare parts, so don't lose out on a vacation dive because you now need to hunt the entire island for the right size hose. This adapter will get you out of trouble in a pinch. Adapter threads into your regulators high-flow port reducing it to a standard 3/8" port in a second. Adapter is made of marine grade chrome plated brass for long life and durability. At times, you can never find the one you need. That is, unless your source is Leisure Pro.... more
Tags: General Accessories,Aa48,1/2" Male to 3/8" Female Regulator Adapter,Assorted Accessories,Aqua,Regulator Adapter
|
Tired of your Second-Stage Hose Tugging at your Mouth when you turn your head? Using a Swivel Adapter can eliminate this Annoying Problem. Your Second-Stage Hose will have a lot more Maneuverability when attached to a Swivel. Swivel is made of Corrosion Resistant Marine Chrome Plated Brass for Strength and Durability comes with Standard Hose O-Ring so it's ready for installation.... more
Tags: General Accessories,Assorted Accessories,Swivel,Aqua,3/8" Male to 3/8" Female with Swivel, Regulator Adapter,Aa46
|
Do you have a First Stage Regulator that has 1/2"-20 Low Pressure Ports and want to attach a Standard 3/8"24 Low Pressure Hose? This adapter allows the connection of a Standard Low Pressure Regulator Hose or Inflation Hose (3/8-24) into a large size Regulator First Stage Low Pressure Port (1/2-20). This Durable Corrosion Resistant Black Finish Chrome Plated Brass Adapter with Viton O-ring is what you are looking for. Designed for Low Pressure Only below 200 psi (13.8 bars) and Factory Cleaned so it's ready for Nitrox this Adapter makes a Great Save-a-Dive Kit item.... more
Tags: XSSLPPA, XS Scuba, General Accessories, Assorted Accessories, XS Scuba LP Port Adapter 1/2" Male to 3/8" Female
|
Need to reduce the thread size of a 3/8" Male Threaded Scuba Regulator Low Pressure Hose to 1/4" Thread? XS Scuba's Stainless Steel 3/8-24 Female to 1/4" Male NPT Adapter can make this work. Adapter allows you to attach a standard Scuba Regulator LP Hose to smaller threaded requirements with a durable and corrosion resistant Stainless Steel Constructed Adapter. This XS Scuba Adapter is designed for use with Low Pressure below 200 psi (13.8 cm).... more
Tags: XSSA3, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Stainless Steel Adapter 3/8-24 Female to 1/4" Male NPT
|
JBL Adapters allow you to match up just about any tip to shaft configuration you can imagine and. JBL adapters are constructed from 303 stainless steel to help resist corrosion. This JBL 1-1/2" (38 mm) adapter is for Scuba Pro and Mares Spear Shafts. Shaft Adapters add versatility to your arsenal by allowing use of multiple spear tips. The JBL adapter has 6 mm threads and makes a great Save-A-Dive Kit Item.... more
Tags: Mares Spearguns,General Accessories,Jbl,Jbl7255,Adapter Fits Scuba Pro,Assorted Accessories,Shaft Adapter Fits Scuba Pro,Shaft Adapter,Jbl 1-1/2" (38 Mm) Shaft Adapter Fits Scuba Pro & Mares Spear Guns,Jbl Shaft Adapter
|
JBL Adapters allow you to match up just about any tip to shaft configuration you can imagine and. JBL adapters are constructed from 303 stainless steel to help resist corrosion. This JBL 1-1/2" (38 mm) adapter is for Cressi Sub Spear Shafts. Shaft Adapters add versatility to your arsenal by allowing use of multiple spear tips. The JBL adapter has 6 mm threads and makes a great Save-A-Dive Kit Item.... more
Tags: General Accessories,Jbl,Cressi Sub Spearguns,Assorted Accessories,Jbl7265,Shaft Adapter,Jbl Shaft Adapter,Jbl1-1/2" (38 Mm) Shaft Adapters Fits Cressi Sub Spear Guns
|
JBL Adapters allow you to match up just about any tip to shaft configuration you can imagine and. JBL adapters are constructed from 303 stainless steel to help resist corrosion. This JBL 1-1/2" (38 mm) adapter is for Technisub Spear Shafts. Shaft Adapters add versatility to your arsenal by allowing use of multiple spear tips. The JBL adapter has 6 mm threads and makes a great Save-A-Dive Kit Item.... more
Tags: Technisub Spearguns,General Accessories,Jbl,Jbl7285,Jbl1-1/2" (38 Mm) Shaft Adapters Fits Technisub Spear Guns,Assorted Accessories,Shaft Adapter,Shaft Adaptertechnisub Spearguns,Jbl Shaft Adapter
|
Need to reduce the thread size of a 9/16" Female Threaded Scuba Regulator Low Pressure Hose to 1/4" Male Thread? XS Scuba's Stainless Steel 9/16-18 male to 1/4" male NPT Adapter can make this work. Adapter allows you to attach a standard Scuba Regulator LP Hose Second Stage end to smaller threaded requirements with a durable and corrosion resistant Stainless Steel Constructed Adapter. This XS Scuba Adapter is designed for use with Low Pressure below 200 psi (13.8 cm), comes Factory Cleaned with Viton O-Rings, so it's ready for use with Enriched Air Nitrox.... more
Tags: XSSA9, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Stainless Steel Adapter 9/16-18 Male to 1/4" Male NPT
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or weight belt. This need is fulfilled by the use of clips and webbing. The Uni-Quick 2 Female Quick-Release Clips with Plastic Gate Clip can meet this need. Made from non-corrosive impact resistant plastic and nylon, it can be attached to the male buckle which come standard on most BCD's or clipped to "D-Ring" on your BCD allows multiple accessory attachments. Plastic Clip has Spring- Gate with 360° Swivel. It's always good to have some extra clips in your Save-A-Dive Kit.... more
Tags: Hook with 2 Female Clips,Uni-Quik,General Accessories,Plastic Clip with 2 Female Ends,Plastic Hook,Assorted Accessories
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or Weight Belt. This need is fulfilled by the use of Clips and Webbing. The Uni-Quick Split Ring with 2 Female Buckles-Ends can meet this need. Made of Corrosion Resistant Metal, Non-Corrosive Plastic and Nylon Webbing it can be attached to the Male Buckle which come standard on most BCD's, you can then attach your accessories either by opening the Split Ring and threading it on like a key, or attach to Split Ring with a Clip... more
Tags: Uni-Quik,General Accessories,2 Females Buckle,Split Ring with 2 Female Ends,Assorted Accessories,Qsr2f,Split Ring
|
You just set up your equipment for the first dive of your vacation in Saint Somewhere, as you press the activation button on your dive computer it goes through the diagnostic screen and what do you see the "Low Batt" Icon appears. The worst thing that can happen on a tropical vacation has just happen No Dive Computer. Don't leave on a vacation without spare batteries, why ruin a great holiday because of a few dollars in batteries. Kit works with Aeris Atmos 1, 2, Ai and Elite Dive Computers. Included with the kit is a 3.0 Volt Lithium CR2450 Battery, Battery Hatch O-Ring... more
Tags: AERBK, Aeris, General Accessories, Assorted Accessories, Aeris Atmos 1, 2, AI, and Elite Battery Kit
|
Phantom Double braided Hose, The flexible, durable, light weight dive hose that lets you forget it's there! The braided polyester design results in lightweight, pliable regulator hoses that provide a much more enjoyable scuba experience and reduces jaw fatigue. They are durable, compact and much easier to pack in a regulator bag than a traditional rubber hose. The Regulator/BCD inflator hoses are rated to 1500 psi working pressure and 6000psi burst pressure . Standard BCD Inflator Hose 3/8-24 UNF Male, 9/16-18 UNF Female, 1500psi working pressure 6000psi burst... more
Tags: ISCPLPHBK22, Aqua, General Accessories, Assorted Accessories, Phantom Standard 3/8 LP Regulator Hose 22" Black
|
|
|