800.637.6880
212.645.1234
|
|
EZ Spring Strap for Scuba Pro Twin Jet Fins, Black
4.5
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
EZ Spring Strap for Scuba Pro Twin Jet Fins, Black Medium
|
Our Price:
|
$37.95
|
|
Sale:
|
$26.95
|
|
You Save:
|
$11.00 (29%)
|
SKU:
AQUEZT
In Stock
|
|
|
Questions about this item:
Rich f I have a medium twin jet fin , I wear a size 9 deep see caribbean low top heavy duty dive boots caribean boot. 3mm . With 5 mm inner sole. What size should i buy?
STUART P You will need a large. I initially tried a medium and had to send them back.
MICHAEL S Same size as your fin
RICHARD P K Hi!
Put your boot and fin on and adjust your current strap to normal adjustment. Using a tape measure, measure strap length between buckles and around heel, then see sizing chart and order correct size, rounding up in size as needed. Chart is accurate and if in doubt, order next size up.
Good luck!!
DAVID B I have large fins and bought large straps. I wear a 10 boot and they are a little tight but perfectly useable. If you like a looser fit, I'd try the large straps on the medium fin. You can always return them for the smaller size just be careful with the packing materials.
I don't know the age of your fins but mine were older and the buckles had to be modified with a dermel tool to fit the older female clip on the fin. The release pull had to be squared off and some excess materials trimmed off. It was not difficult to do. Only took about half and hour to trim.
Hope this helps.
CHRIS S I would get a middle size like medium
STUART P I use a medium in the fin and wear a 9 Deep Sea with a narrow foot. I ordered medium springs and had to send them back for a large.
ART R How do you choose the correct size?
VANESSA H ok I tried to do the measuring thing , but honestly I bought two ( small & medium) and just returned the one that didn't work...I have been happy with my spring strap since for the past several years!!!
DAVID F Read the reviews, you'll probably find someone else with the same size flippers asking the same question.
I have XL flippers and bought the XL spring straps. Works good with a DUI rock boot
MARK E i measured my old strap when adjusted to proper fit. Then pick the size that closely matches. The spring strap stretches to allow you to slip it on. They are very comfortable and easy to use.
ANN H I'm not sure as I bought these in 2010. I think I guessed Medium since I'm female and my shoe size is 7 1/2 to 8. Leisure Pro has a great return policy, so I wouldn't worry if you do select the wrong size.
KEVIN C When I bought mine I don't think I had a choice in size. Whatever size I bought fit my size large fins.
Sorry I wasn't any help.
RANDOLPH T To correctly size your spring straps you will need to wear your wetsuit boots you will be using with your fins and measure from buckle to buckle. they come in three sizes, small, medium, and large and each size corresponds with inches.
ART R Makes sense. Thanks for your response. Art
Shopper Who is the manufacturer of this item? The description says "limited lifetime warranty" but I Googled "Aqua" and the only results I got were "Aqualung" brand and Leisure Pro.
If the clips break, who provides the Lifetime Warranty? Where do you send them? Is their a processing charge? Did anyone received a manual or data sheet with their merchandise?
Thanks
Frank L You could always send them back to us for warranty issues, or deal with the manufacturer, Innovative Scuba. There is no manual for these, just put them on and go diving!
Shopper I have Scubapro JetSport fins... will these work?? I actually emailed Scubapro and they said they thought these would, but I want to be sure as I do not believe they make this product.
RON G The definitely work well. The best investment you can make.
Made it simple to put the fins on and take them off. Honestly, they worked excellently. As I recall, the first set I got were too small (I use dry boots with my dry suit). Exchanging them for the larger set worked perfectly. So, you may want to simply take some time to get a handle on the size that will work best for your foot, boots, etc.
MARK L I loved these on my old TwinJets! I bought another pair, hoping to use them on a pair of JetSports also, but they DID NOT FIT. The clips that they come with seem to fit only the TwinJets. I got them to work by making a small modification to the clips from the SportJets so that they could be attached to the steel springs. Now they work GREAT!
ANTHONY C They look like they will unless Scuba Pro redesigned the clips. Check with Scuba Pro and see if the part numbers match for their replacement straps for both the Twin Jets and the JetSports.
STEVE A I purchased them and use them on Scuba Pro Twin Jet fins and they work great
Shopper I wear a size 13 soft boot, usually 3mm. My Twin Jets are XL. What size strap do I need?
TERRY G I would recommend an XL strap - in general, the strap should match the fin size; I tried going a size down and it was way too tight.
Eric E More sizing questions. I am moving up to a size XL Twin Jet to accommodate BARE Trek boots in size 10. What size strap would I need. L or XL?
RICHARD B Eric
You will need to use the xl to avoid breaking the pull ring at the back of the strap. These rings are forgiving within the sizes that they are designed for. I hope that this helps.
Richard Belmore
1ST Lieutenant
Oconee County Dive Team
Eric E Thanks for the great input everyone. I think I actually may be out of luck. These twin jets have a date of 11 2000 on them. I think those are the older female buckles and these straps aren't compatible. Anyone know for sure?
SANDRA M HI,
I have x-small V12s and I ordered a set of small spring straps. I know there's a big difference between x-small and L or XL, but maybe the size comparison can help.
SCOTT C I would recomend extra large,
Shopper Do you have springs that will fit the Scubapro Twin Jet Max fins?
Shopper Will these straps work with the older twin speed fins?
LeisurePro S Yes, these will fit new and older models of the Twin Jet and Twin Jet Pro as well as Twin speed fins.
Shopper I'm a size 10 bootie. What size strap should I get?
LeisurePro S I would recommend the medium straps.
Shopper I have a size Large Scubapro Twin Jet fin, do I use a size Large spring strap?
LeisurePro S Yes. Same fin/strap size.
Shopper My scuba pro twin jet fins are size medium. Do I order medium EZ spring straps FYI: my shoes size is men s size 8 thanks
LeisurePro S Not for Max fins
Shopper How are they supposed to fit once they are on? Are they supposed to be tight and snug against your heel ?
LeisurePro S Yes that is correct
Shopper hiy i have xl twinjets my shoe size is 44 what strap will do the job ?
Shopper My husband wears a size 10 bootie and has Large fins, what size strap does he need?
Shopper I have the XL sized fins (I wear a size 14 shoe and my boots are 5mm Akonas)) but my heel doesn't stick out very far over the back of the foot pocket. Do I need to get the XL straps or would the Large (or even Medium) size be sufficient? I like a snug fit, but don't want to wind u with them strapped on so tight I'm uncomfortable.
LeisurePro S Large would be my choice
Shopper What is the proper way to measure for the right spring length for my fins?
LeisurePro S From center of the fin pin around your foot to the center of the fin pin on the other side.
Shopper I have a 8 size shoe and I use a dry suit for cold water and I use boots for warm water...Do I need a small or medium?
LeisurePro S Medium should do.
Shopper I have a size 9 shoe and a med. size fin. Which size strap should I get. I only dive with a 3mm short boot.
LeisurePro S I would say most likely you will need a medium.
Shopper hi i have a mid-l scubapro fin twin speed,my shoe size is 9,what size ez sping strap do i need?
Shopper Do these fit the twin jet max fins??
Shopper Does this come with one or two straps?
LeisurePro S Yes this is for 2 straps
Shopper Why Did You Choose This?
BRENDA H My husband wanted a pair also.
BRENDA H IT made it so much easier to get my fins on & off, when my hands are cold.
DOROTHY C I wanted easy put on and remove straps while maintaining firm fitting.
SHANNON A I bought these originally because I thought it would be easier to deal with since I like to use a boot with my fins. Since I started using them, I don't think I'll ever go back to the original fin strap. You cannot tell by the picture but these have a rubber finger entry so it makes for ease when trying to pull off your fins, especially while trying to hold on to boat ladder and waves are pretty rough!
ELLEN J Removing fins after a dive is so much easier now. Love these straps.
Whats in the box:Set of EZ Spring Fin Strap, These unique stainless steel fin straps come with a limited lifetime warranty and include rubber "Comfort Grip" puller. The rubber comfort puller provides heel cushioning and large grip to aid in pulling fin straps on and off. ScubaPro Twin Jet model comes with the mating ScubaPro male side of the buckle (ScubaPro female side is attached to the fin). Below is a list of the actual fin strap sizes: (the measurements are for the spring itself without the buckle) ScubaPro Twin Jet - SM 6" - MD 7" - LR 8" - XL 9"
- Corrosion Resistant Stainless Steel
- "Comfort Grip" Puller
- Fits Scuba Pro Twin Jet Fins
- Easy to Install
| Weight [with packaging] | Medium: 0.45 lb, Small: 0.7 lb, Large, X-Large: 0.75 lb |
- Easy To Use
- Functional
- Improves Diving Experience
- Solid Construction
- Easy To Use
- Functional
- Improves Diving Experience
- Solid Construction
8/7/2012 5.0Wish I had these years ago - Easy To Use
- Functional
- Improves Diving Experience
- Solid Construction
5/22/2012 4.0Good quality/small sizing By Brunswick Rick from Brunswick, NY - Easy To Use
- Functional
- Quality Product
- Solid Construction
|
|
Related products for EZ Spring Strap for Scuba Pro Twin Jet Fins, Black Medium
|
These unique stainless steel fin straps come with a limited lifetime warranty and include rubber "Comfort Grip" puller. The rubber comfort puller provides heel cushioning and large grip to aid in pulling fin straps on and off. ScubaPro Twin Jet model comes with the mating ScubaPro male side of the buckle (ScubaPro female side is attached to the fin). Below is a list of the actual fin strap sizes: (the measurements are for the spring itself without the buckle) ScubaPro Twin Jet - SM 6" - MD 7" - LR 8" - XL 9"... more
Tags: AQUEZTLBK, Innovative Scuba, General Accessories, Assorted Accessories, EZ Spring Strap for Scuba Pro Twin Jet Fins, Black Large
|
Like the Tail-Fin of a Humpback Whale, SCUBAPRO's Twin Jet Fins use a Split-Hydrofoil Shape to deliver more Forward Motion with Less Effort. Result: more Power with Less Effort and Drag. This Fin style offers you the ability to move Quickly-and-Effortlessly without Sacrificing Control while Swimming at Depth. Of the four colors, the black fins are the most rigid and offer a more traditional fin experience. Of the Three Colors, the Black Fins are the most Rigid and offer a more traditional fin experience. The Black Fins are slightly negatively buoyant... more
Tags: SCPFTMLRBL, Scubapro, Fins, Essential Equipment, Scuba Pro Twin Jet Max Open Heel Split Fins Blue Large (9-12)
|
|
|