800.637.6880
212.645.1234
|
|
"CONS-HOLD" Console Extender with Quick Release & Clip
4
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
"CONS-HOLD" Console Extender with Quick Release & Clip
|
Our Price:
|
$11.95
|
|
Sale:
|
$8.95
|
|
You Save:
|
$3.00 (25%)
|
SKU:
AQUCH
In Stock
|
|
|
Questions about this item:
Shopper Not 100% on how to correctly use this. Could some one upload a pic of it on their computer?
mike h You loop the rope end to a lanyard hose on your console. Did not like it so I returned it for a similar item with caribeeners on each end.
JIMMY M I was a little baffled by it too. I finally decided the only way it could work would be to push the little closed loop end (at one end of the long tube like retainer) through a D-ring on my BCD. Then I threaded the larger clip end through the closed loop end after making the opening larger by pulling it out a ways through the tube. Then just pull it tight and you will have the elastic pull looped through itself around the D-ring to hold it fast, with the protective tube extending away toward the clip end. I guess the tube is to protect the elastic and to keep it closely gathered. I used this device for a few years on my console w/air gauge and computer and compass. When it finally broke, I just retied the elastic and continued using it--although the tube fell off and was lost when the elastic snapped. I continued to use it until I got a little better one that came as a pkg deal with a new dive light. I still have it and another one just like it. Very simple and easy to use--Just grab and pull whatever it is connected to and bring it into range and then let it go when you're done.
JOEL B Due to its length, I hook the plastic clip (1pm position in the product picture) to the metal (or plastic) O on my BC at the chest level (I prefer the permanent/ nonmoveable one. the moveable one is the one at the end of the BC shoulder strap adjuster and ends up in different positions depending on how my tank is positioned, wet suit use, and general comfort that day. Using the non-movable one, I always have it in a consistent location.
Leave the rubber sleeve on the elastic. Put your computer (which I assume is mounted into a housing with your pressure gauge through the loop (2pm position in the picture).
You can then tighten down the sleeve to minimize the loop to a reasonable size where the elastic hooks to the clip (7pm on the picture).
Shopper Is the extension long enough to use when compass is part of the combo?
LeisurePro S I don't know the exact size of your console, but I don't foresee you having a problem.
Whats in the box:"CONS-HOLD" Console Extender with Quick Release & Clip We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. This Console Extender mounts in seconds. Simply thread the Cons-HOLD back through its elastic loop so that it holds your console snugly. Cons-Hold keeps your console at the same viewing angle throughout your dive. When you need to see your gauges up close it extends to twice its length. When you're finished monitoring your dive information it retracts to its original viewing angle even after being pulled by another diver for a reading. Con-Holder has Durable Rubber Tubing over Abrasion-Resistant Polyester Bungee Material, with a Non-Corrosive Squeeze-Style" Plastic Quick-Release Buckle and Swivel Gate Clip Snap for attachment to Gear. It's always good to have some extra clips in your Save-A-Dive Kit.
- "CONS-HOLD" Console Extender with Quick Release & Clip:
- Keeps Console Ready for Viewing
- Stretches to Twice its Length and Back Again
- Protects the Reef and your Expensive Console from Damage
- Gauges are All Ways Were You Want Them
- "Squeeze-Style" Quick-Release Buckle and Gate Clip Snap
- Buckle & Snap: Durable Non-Corrosive Plastic
- Abrasion-Resistant Polyester Bungee with Rubber Cover
- Great Save-A-Dive Kit Item
| Materials | Strap: Nylon Webbing
Bungee Material: Rubber Tubing & Polyester
Clip: Plastic | | Attachment | Gear Attachment: Gate Clip
Hose Attachment: Bungee | | Weight [with packaging] | 0.05 lb |
3/24/2013 5.0You Really Got a Hold On Me - Easy To Use
- Lightweight
- Solid Construction
3/21/2013 4.0I would by this product again By Craig from Colorado Springs, CO About Me Casual/ Recreational - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
By GalvDiver from Houston, TX - Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
- Solid Construction
- Easy To Use
- Functional
- Improves Diving Experience
- Lightweight
8/23/2012 5.0I would buy this product again. By Vands from Garland, TX About Me Casual/ Recreational - Easy To Use
- Functional
- Improves Diving Experience
|
|
Related products for "CONS-HOLD" Console Extender with Quick Release & Clip
|
Dive Lights, cameras and game measuring devises all need to be at your finger tips, but you also need to use your hands to work and adjust your life support equipment. Placing the light or camera down on the bottom is not an option. A lanyard is the ultimate answer for the diver who needs to let go of accessory items, but want them at fingertip reach. This Uni-Quick Lanyard with Quick Disconnect Male Clip can meet that need, loop the lanyard around your wrest attach the clip to a female quick disconnect attached toyour accessory and you are ready to go. When you need the use of your hands... more
Tags: Uni-Quik,General Accessories,Quick Disconnect Male Clip,Uni-Quik Lanyard,Assorted Accessories,Lanyard with Male-End Quick Release Clip
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Lanyards for lights, cameras, gauges, game bags, or maybe even a fish stringer when spear fishing. Having a few spare clips in your gear bag is a must for the serious diver. It's a snap! This coiled lanyard expands to 36". (91.4 cm) Simply unhook the Quick-Release Latch with a Squeeze of the fingers and the Coil-is-Released, offering up to 36" (91.4 cm) of extension during use... more
Tags: Quick Release,Ss Split Ring,General Accessories,Assorted Accessories,Aqua,Brass Clip,36" (91.4 Cm) Quick Release Coil Lanyard with Brass Clip and Ss Split Ring,Coil Lanyard With
|
H2Odyssey's Quick Release EAS Bag is the best way to mount your redundant air system. Designed to hold a 6 cu ft tank, the bag clips easily to your BCD "D"-rings. Bag is made of durable nylon material with two adjustable Quick Release Buckle straps.... more
Tags: H-2odyssey,6cu Ft Tank,H2odyssey,General Accessories,Assorted Accessories,Quick Release Eas Bag,H2odyssey Quick Release Eas Bag for 6 Cu Ft Tank
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or Weight Belt. This need is fulfilled by the use of Clips and Webbing. The Uni-Quik Trigger Snap with Female Quick-Release Buckle-End can meet this need. Made from Corrosion Resistance Marine Brass, Plastic, and Nylon Webbing it can be attached to the Male-End of a Quick-Release Buckle which come standard on most BCD's or Clipped to a "D-Ring" of the BCD... more
Tags: UQR32F, UNI-QUIK, General Accessories, Assorted Accessories, Trigger Snap with Female Quick Release Buckle-End
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or Weight Belt. This need is fulfilled by the use of clips, webbing and Velcro. The Uni-Quik Male Quick-Release Buckle with Velcro Hose Holder can meet this need. Made from Corrosion Proof, Impact Resistance Plastic, and Nylon Webbing with Velcro Hook and Pile, it can be attached to the Female End of Buckle which come standard on most BCD's, then Looped-Over Hose via Nylon Webbing with Velcro. It's always good to have some extra clips in your Save-A-Dive Kit.... more
Tags: Uni-Quik,General Accessories,Assorted Accessories,Male Quick Release with Velcro Hose Holder,Velcro with Male Buckle,Qvm
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or weight belt. This need is fulfilled by the use of clips and webbing. The Wrap-Around Webbing with Female Quick-Release Buckle-End can meet this need. Made from Non-Corrosive Impact Resistant Plastic and Nylon Webbing, it can be attached to the Male Buckle, Threaded to a D-Ring which comes standard on most BCD's, or Looped through Webbing on your BCD or Weight Belt. It's always good to have some extra clips in your Save-A-Dive Kit.... more
Tags: UQGC08, UNI-QUIK, General Accessories, Assorted Accessories, Wrap-Around Webbing with Female Quick Release End
|
Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or weight belt. This need is fulfilled by the use of clips and webbing. The Wrap-Around Webbing Male Quick Release can meet this need. Made from non-corrosive impact resistant plastic and nylon, it can be attached to the female buckle which come standard on most BCD's or looped through webbing on your BCD or weight belt. It's always good to have some extra clips in your Save-A-Dive Kit.... more
Tags: UQGC09, UNI-QUIK, General Accessories, Assorted Accessories, Wrap-Around Webbing with Male Quick Release
|
Carabineer: an oblong metal ring with a spring clip or locking devise; used in mountaineering to attach a rope to a piton or to connect two ropes. Strong and dependable for climbing it will also work well for diving. Gauges, computers, game bags, dive lights, cameras, slates, you name it a diver wants to secure it to their BCD or weight belt. This need is fulfilled by the use of clips and webbing. This Carabineer with Quick-Release Male End can meet that need. Made of Corrosion Resistant Stainless Steel... more
Tags: UQR24M, Aqua, General Accessories, Assorted Accessories, Stainless Steel #2 Carabineer with Webbing and Quick Release Buckle
|
Prevent fin buckle malfunctions by always having a spare quick-release fin buckle in your Save-a-Dive kit! This basic fin buckle will fit a large scope of strapped fins, features a squeeze style quick disconnect release for easy donning or removal of fin, and is made of impact resistant plastic. This simple buckle could save a dive!... more
Tags: Aqua Quick-Release Fin Buckle, without the Fin Strap,General Accessories,Fin Strap,Assorted Accessories,Quick-Realase Fin Buckle,Aqua,Aqua Quick-Realase Fin Buckle
|
Scuba Pro introduces a new concept in Mouthpiece Retainers. Instead of throwing away Single-Use Plastic Tie-Wraps, this Band can be used Over-and-Over Again. Plus, with today's Health Issues, it's also ideal for Students, Classes, Resorts and Rental Regulators, allowing the Customer to Supply their Own Mouthpiece. Great for Travel or just a handy item for a Save-a-Dive Kit this Durable Plastic with Metal Latched Quick-Release Mouthpiece Clamp goes On-Easy and can be Quickly Release when you need to remove the Mouthpiece.... more
Tags: Mouthpiece Clamp,General Accessories,Assorted Accessories,Aqua Quick Release Mouthpiece Clamp,Aqua,Quick Realease,Aqua Clamp
|
There are several items that are essential when putting together a Save-A-Dive Kit, Cylinder Valve O-rings, Fin Straps, Buckles, etc. One of the most important items is the Spare Knife Strap. This Rubber 20" (50.8 cm) Quick Release Buckled Strap is Universal and will Fit-a- Large-Variety of Knife Sheaths out there. Don't let a bad Knife Strap be the causes of you not carrying your Diver's Tool, always have a Spare. Strap is made of Depth Compensating Rubber, so your Knife won't get lose when your Exposure Suit Compresses Upon-Descent... more
Tags: 20" (50.8 Cm) Quick Release Rubber Knife Strap,General Accessories,Rubber Knife Strap,Knife Strap,Assorted Accessories,Aqua
|
Want to make donning your fins easier? These Blue Reef Super Flex Fin Straps are what you are looking for. Large finger loop for easy gripping even with the thickest gloves allows quick and easy donning and doffing. Straps come equipped with non-corrosive plastic quick release buckles. Straps come in 10 inch (25cm) and 10-1/2 inch (27cm) lengths, and carry a 24 month warranty.... more
Tags: BLRSFSLR, Aqua, General Accessories, Assorted Accessories, Blue Reef Super flex rubber fin's strap with quick release buckles Large 27cm
|
A Webbing Harness designed for Hard Back-Plates that provides Comfort and Ease of Entry/Exit along with Streamlining. Swivel Points on the Shoulder Straps ensure a Comfortable Fit, which is especially important for women and, also, men with broad shoulders. A Chest Strap (sternum strap) keeps the Harness in place while a Left Shoulder 2 (5.1 cm) Delrin Squeeze Style" Quick Release Buckle allows for Easy Donning and Doffing of equipment. 2" (5.1 cm) Nylon Webbing provides Strength with 7,000 lbs (3,175 kg) of Tensile Strength, yet is soft and won't dig into the body... more
Tags: Essential Equipment,Div1080q,Harness with Quick Release Buckles,Deluxe Harness,Dive-Rite,Dive Rite Deluxe Harness with Quick Release Buckles,Dive-Rite Deluxe,Buoyancy Compensators,Dive Rite
|
The OMS harness is perfect for those who want a quality diving harness with a single left side quick release. The harness is a crossshoulder harness. This means each side of the upper harness crosses at the top (behind the diver's head) then joins to the lower assemblies on the opposite side. Top left to lower right and top right to lower left. This is a design for superior comfort.... more
Tags: Oms Harness with Quick Release Only,Essential Equipment,Harness with Quick Release,Oms Harness,Oms Quick Release,Oms,Buoyancy Compensators
|
|
|