800.637.6880
212.645.1234
|
|
SeaSoft Adjustable Tank Weight Pocket Only
5
See More Similar
Scuba Weights and Belts »
|
|
SeaSoft Adjustable Tank Weight Pocket Only
|
List Price:
|
$32.99
|
|
Our Price:
|
$21.95
|
|
You Save:
|
$11.04 (33%)
|
SKU:
SSTTWPO
In Stock
|
|
|
Questions about this item:
HARVEY H Dimensions?
FRED L Harvey,
At this time of year all of my dive equipment is packed away and I can not get to the tank weight pocket to give you dimensions.
However, I can tell you that when I strap it on to an aluminum 80 it has room to easily take a 2 lb soft weight. I am not sure I have ever tried to put two of those weights in it, but suspect I can. I will see if I can unpack enough equipment to get to the pocked and get you a better response
Fred Lilly
THERESA B 16CM X 12 CM, approx. 6" X 5"
DAVID W I don't have the exact dimensions handy, but it is a 2" strap, and the pouch will hold a couple of 3 lb shot bags.
I use this if I am wearing a 7 mil wetsuit to put some of the weight behind me instead of in my BCD. It helps me sit better in the water at the surface.
JIM A It is about 5.5" wide by 5" tall.
MARK D Outside dimensions of the weight pouch are 6" wide by 5" tall. Appears to be about 5mm neoprene so inside dimensions are somewhat less. Tank strap is 28" long (fully extended) with an adjustable clamp to fit smaller diameter tanks.
Shopper Can someone post (or point to) a video on how to mount this pocket on tank?
ART R No video, but when I use it I place it mid tank (facing backwards away from the diver) sinch it up, and make sure the strap is pinched between the backpack of the BC and the tank. Works well and keeps you from pitching forward on the surface when the tank is empty after the dive. It also allows you to split your total weight 3 ways (left, right, back of tank). Just make sure you get into the habit of hooking it back on BC after a dive or you will lose it on the boat.
ROB P The weight pocket comes with an adjustable nylon strap with a plastic buckle.
Most people I see using it would wrap the strap around the tank above the BC strap to aid with trim bouyancy and to make sure it doesn't slip off.
I have seen others mount it below the BC strap by adding a piece of non-slip rubber matt (used for drawers, cabinets, or under carpets on hardwoods) around the tank where they strap it on to prevent slippage.
Shopper how much weight can this hold ??
ROB P 5 lbs - soft shot works best.
TERRY N I use a 4 lb weight but it will hold a 5 lb weight. I dive with steel tanks and do not use any weights unless I use a wet suit, This tank weight is sufficient with my 3-2 suit.
DR. ANTONIO F I use 2 pounds. I guess it can hold 4-6 pounds. It's an excellent product.
WAYNE G I have easily put five pounds in this pocket without a problem.
ANNMARIE Y I use it with two lbs only when I dive a single big steel tank. It is prone to slipping and has to be monitored. It would probably hold ten, but I haven't put more in it. I would worry because it has come off during a dive.
Shopper What is the max size weight that this pocket can hold? Hard or soft weights?
LeisurePro S Can hold up to 5 pounds. Best with soft weights.
Shopper Why Did You Choose This?
ART R Hated the pitch forward on the surface after a dive due to now more buoyant tank and also takes some of the bulge out of the BC.
Warranty Information
This product has a limited warranty of 24 months.
www.seasoftscuba.com
(800) 939-5510
Great way to keep the weight off your hips and add some to your cylinder with this Sea Soft Adjustable Tank Weight Pocket, just mount and adjust the band to your cylinders diameter and you have shed some lead from your waist to your cylinder. Placing weight onthe cylinder will also help eliminate the buoyancy you may experience from an aluminum cylinder when near empty. If your cylinder rides up in the second half of your dive due to cylinder buoyancy this tank weight pocket is what you need. Constructed of durable materials for long life with quick clips for both adjustment to cylinder and weight retention SeaSoft tank weight pockets are just what you need.
- Eliminates Cylinder Buoyancy
- Durable Construction
- Corrosion Free Quick Clip Buckles on Strap and Weight Retention
| Weight [with packaging] | 0.25 lb |
By Brian from Montana About Me Casual/ Recreational - Easy To Use
- Functional
- Improves Diving Experience
- Type Of Diving:
- Warm Water Diving
- Male/Female:
- Male
- Was this a gift?:
- No
|
|
Related products for SeaSoft Adjustable Tank Weight Pocket Only
|
Great way to keep the weight off your hips and add some to your cylinder with this Sea Soft Adjustable Tank Weight Pocket, just mount and adjust the band to your cylinders diameter and you have shed some lead from your waist to your cylinder. Placing weight on the cylinder will also help eliminate the buoyancy you may experience from an aluminum cylinder when near empty. If your cylinder rides up in the second half of your dive due to cylinder buoyancy this tank weight pocket is what you need... more
Tags: Essential Equipment,Seasoft Tank Weight,Seasoft,Seasoft 4lbs Buckle Strap,Seasoft Quick Release Buckle Strap,Weights & Belts,Seasoft Tank Weights 2 Lbs
|
Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, or maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your weight belt? Whatever you need to get more stability or comfort in diving from the lead weight this XS Scuba Single Tank Weight Pocket can help. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band, weight belt webbing or harness depending on where you want to hang the pocket... more
Tags: Xs Scuba Weight Pocket,Xs Scuba,General Accessories,Assorted Accessories,Xs Scuba Tank Pocket,Xs Scuba Single Weight Pocket Black,Tank Weight Pocket
|
Does your tank get to buoyant near the end of a dive and you keep getting banged in the head from the valve, maybe you would like to relieve your hips from all that weight from your weight belt or you're looking for a simple weight pocket for string on your Harness Waist Strap or Weight Belt? Whatever you need to get more stability or comfort in diving from the lead weight these Scubapro X-Tek Counter Weight Pockets are what you're looking for. Pocket easily attaches by sliding over the end of any 2" (5.1 cm) cylinder band... more
Tags: SCPXTCWP, Scubapro, Buoyancy Compensators, Essential Equipment, Scubapro X-Tek Counter Weight Pockets, Pair
|
This Unique Weight Pocket by XS Scuba is designed to be used in two ways. First it can be used with the XS Scuba Weight Belt (SKU: XSSWB) as an Add-On Pocket and it also can be used as a Trim Weight Attached to your Cylinder Cam Band. The Extra Velcro Loop attached to the Front Closure of the Pocket allows Excess Webbing from Cam Band to be attached to the front of the pocket, keeping your Profile more Streamlined. Pockets are built with 1000 Denier Cordura for Durability and Long Life. Double Needle Stitching adds to their Strength and Durability. Pockets hold up to 5 lbs (2... more
Tags: XSSSWPV, XS Scuba, General Accessories, Assorted Accessories, XS Scuba Single Weight Pocket with Velcro Front
|
Do you teach diving, do you find the need for additional weight on certain dives, and is your trim in the water not exactly as you want it? All these needs can be met with XS Scuba's Quick-Attach Single Weight Pocket. Pocket is great when teaching and you need to quickly add additional weight to a new student. When you change exposure suits or add layers of neoprene for warmth, or you keep leaning in one direction or the other when fining and want to correct you're trim. Pocket allows quick addition of up to 5 lbs of lead in each pocket without having to slide over the end of a webbing belt... more
Tags: XSSQAWP, XS Scuba, General Accessories, Assorted Accessories, Xs-Scuba Quick-Attach Single Weight Pocket
|
The Manta Industries & Highseas Millwork weight pocket holds up to 10lbs (4.5 kg) on each side. Quickly attaches to two inch (5.1 cm) webbing. Manta's weight pockets feature a patented dumping system to make sure that your weight is only dumped when you pull on the handles. This set of two pockets is manufactured from strong and durable Cordura Nylon. Weight pockets come with a 60 month limited warranty.... more
Tags: MNTWPS, Manta, General Accessories, Assorted Accessories, Manta Weight Pockets Set Of Two
|
If you have a Scubapro X-Tek Buoyancy Compensator System or a Tec Harness with 2" (5.1 cm) webbing and want to add Weight Integration the removable Buckle Weight Pocket System is designed to be used with the 2" (5.1 cm) waist webbing of the X-Tek Back-Plate or other Tec System. Weight Pockets are easy to install and are manufactured with durable Nylon Material with Impact Resistant Quick Release Weight Buckles and Metal Attachment Rings and Hardware. Pockets come equipped with Metal D-Rings for attachment of accessories. Weight Pockets are designed to carry approximately 10 to 12 lbs (4... more
Tags: SCPWPQR, Scubapro, General Accessories, Assorted Accessories, Scubapro Accessory Quick Release Weight Pockets, Pair
|
Cressi's Flat Lock Weight Pockets are designed to fit the Cressi Back Jac, Aquaride Elite, Travelightand R-1 BCD's. This well designed Integrated Weight Pocket System can hold up to 10 lbs (4.5 kg) of Hard or Soft Lead Weights in each Pocket. The Pockets have a Unique Flat Lock Buckle System that is Extremely Low Profile in Design with Pivoting Pull Release Handles that can be Folded Inward to Lower the Divers Profile and Reduce Drag. The Positive Locking Buckle's will not Release the Weight Pocket unless you want them to... more
Tags: CSBWPF, Cressi, General Accessories, Assorted Accessories, Cressi Flat Lock Weight Pocket (Single Pocket)
|
The Mares Pegasus back inflation BCD incorporates a high lift, lighter weight construction design with pre-shaped shoulder straps and dual position adjustable chest strap for best fit. The Pegasus BCD features heavy-duty techno-polymer D-rings, a removable double crotch strap and the Mares MRS Plus weight integration system.Optimal ballast with a mechanical release system (MRS Plus), a simple click ensures easy and secure storage of the weight pockets. A single outward pull on the oversized handle releases your weights. Maximum load 13 lbs (6 kg)... more
Tags: MRSPGLR, Mares, Buoyancy Compensators, Essential Equipment, Mares Pegasus BCD with MRS Plus Weight Pockets, Black Large
|
|
|