800.637.6880
212.645.1234
|
|
SeaSoft Drysuit Hood 3mm
5
See More Similar
Scuba Hoods »
|
|
SeaSoft Drysuit Hood 3mm 2X-Large
|
List Price:
|
$39.99
|
|
Our Price:
|
$31.99
|
|
You Save:
|
$8.00 (20%)
|
SKU:
SSTHD3
In Stock
|
|
|
Warranty Information
This product has a limited warranty of 24 months.
www.seasoftscuba.com
(800) 939-5510
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go, they are still their original thickness and working to keep you warm! You will not find any seams down the middle of the chin either. This seam, found in almost all hoods today, can cause jaw fatigue. The seam is there because it is less expensive to make a hood from just two halves. We do not believe that a hood is the place to go cheap.
- The 3 back panels are compressed neoprene, your hood should not be getting thinner as you go deeper!
- There are no seams in the middle of the seam to cause jaw fatique.
- Uses 4 different types of neoprene to make this hood, others use one or two.
- There are two tiny holes in the top of the hood with a baffle system to allow air to purge.
- High quality neoprene is used throughout on every hood.
- There is "skin in" on the neck to bind to your drysuit seal.
| Hood Material: | Neoprene. | | Thickness: | 3mm. | | Seams: | No Chin Seam. | | Weight [with packaging] | Medium, Small, X-Small: 0.45 lb, 2X-Large, Large, X-Large: 0.5 lb |
By Boggyman from Howell, Michigan About Me Professional Diver - Sizing:
- Feels true to size
- Diving Type:
- Drift Diving, Night Diving, Rescue Diving, Wreck Diving
|
|
Related products for SeaSoft Drysuit Hood 3mm 2X-Large
|
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go... more
Tags: SSTHD3XL, Seasoft, Hoods, Exposure Protection, SeaSoft Drysuit Hood 3mm X-Large
|
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go... more
Tags: SSTHW32X, Seasoft, Hoods, Exposure Protection, SeaSoft Wetsuit Hood 3mm 2X-Large
|
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go... more
Tags: SSTHD62X, Seasoft, Hoods, Exposure Protection, SeaSoft Drysuit Hood 6mm 2X-Large
|
When diving, the deeper a diver goes the colder it generally gets and with increasing pressure, a typical neoprene hood gets thinner. If the temperature is getting colder and your hood is getting thinner, you're going to get cold. And, when you consider that 40% of heat loss is from the head area, it seems like this would be a place to make sure you are adequately protected to ensure warmth and comfort. All of our SEASOFT Ti PRO Hoods have compressed neoprene for the back panels of the hood. This means that no matter how deep you go... more
Tags: SSTHW62X, Seasoft, Hoods, Exposure Protection, SeaSoft Wetsuit Hood 6mm 2X-Large
|
Aqua Lock Hoods Designed as part of the Aqua Loc system these Hoods utilize the same construction techniques employed by all Aqua Lock Wetsuits. Every seam on the hoods are first double glued and blind stitched inside and out. Then the outer seam is coated with a special waterproof Aqua Lock liquid tape barrier which seals the seam from water entry and also helps protect the stitching from damage and unraveling. The interior of the Aqua Lock hood are lined with a Golden micro fleece lining which dries quickly and feels luxurious against the skin... more
Tags: Exposure Protection,Henderson,Henderson Aqua Lock Hood 3mm 2x-Large,Hoods,Henderson Hood,Henderson Aqualoc,Henderson Aqualoc Hood,Aqualoc Hood
|
Cressi-Sub introduces the Castoro Line of Wetsuits and Accessories. The Castoro Hood is a 5 mm Nylon II Neoprene Men's Hood. The Hoods Seams are Reinforced Glued and Sewn for Long Life and Durability. The Hoods Face Seal is a Skin-In Material to Reduce Water Exchange and add Warmth. Specifically sized for Men Cressi is sure you will be Warm-and-Comfortable with this product. Hood is available in sizes Small, Medium, Large, X-Large and 2X-Large is Black and Yellow in color and is covered by a 12 month limited warranty.... more
Tags: CSBHCM2XL, Cressi, Hoods, Exposure Protection, Cressi Castoro 5 mm Hood Men's 2X-Large
|
Keeping warm on a cold dive is the ultimate challenge one must overcome to enjoy the dive and think about what they are seeing on the dive not when will it end so I can get warm again. This Bare Elastek 7 mm Cold Water Hood is definitely a step in the right direction for total warmth. Hood is designed to Seal with your Skin around the Neck using a Nylon I Skin in Seal which when against your skin will keep Water Exchange to Minimum adding Warmth to your Dive. Superior Cold Water Protection and Comfort, so keep yourself warmer when Cold Water Diving... more
Tags: BREHE2X, Bare, Hoods, Exposure Protection, Bare Elastek 7 mm Dry Hood, Black 2X-Large
|
Water Rescue Personnel know the need for quality and dependable exposure protection. Henderson assures this need with its Water Rescue Line of Exposure Suits and Accessories. Henderson has been the exclusive supplier of water rescue suits to the USCG for more than 20 years. These rescue suits have been proven during tens of thousands of hours of intense Search and Rescue operations. All of the Henderson Rescue items have been chosen for use as replacement and original issue by the United States Coast Guard Helicopter Rescue Swimmer Program... more
Tags: HNDRHV2XL, Henderson, Hoods, Exposure Protection, Henderson Water Rescue Swimmer Hyperstretch 5/3 mm Hooded Vest 2X-Large
|
|
|