800.637.6880
212.645.1234
|
|
Scuba Pro Air 2, Combination Octopus/Inflator Regulator, Black/Gray
5
See More Similar
Scuba Octopuses »
|
|
Scuba Pro Air 2, Combination Octopus/Inflator Regulator, Black/Gray
SKU:
SCPA2GYR
In Stock
|
|
|
Questions about this item:
Shopper Will this fit an IST Alpha 1000 BC?
TIMOTHY M It will fit almost any Bc on the market
Shopper I have a cressi Air Travel BCD I am looking for a compatible Air 2 Octo?
ROBERT B This isn't an octo, it replaces your current Cressi power inflator. This will work fine, just replace the hose to your first stage with the one that comes with it.
Air2's are fantastic.
Kurt R Will the Air2 work with an Aqualung Zuma?
ROBERT B It works with all bc's
ROBERT B It works with all bc's
MARCUS L My corrugated hose is a Zeagle. Will this fit?
Frank L Yes, it will fit on a Zeagle.
J F D yes. I use with zeagle.
BEN K Hi,
I had a Zeagle for years before switching to a diverite and used the Air2 with no problems. I've used the air2 for shallow dives and deep dives with out fail. This in combination with an air integrated computer really streamlined my dive rig.
Hope this helps!
ROBERT B Typically the flex hose to your bc is a standard diameter. I have put the air2 on several bc's. Including scuba pro, OMS, dacor, and some others. Never a zeagle but I am pretty sure they are all the same. You will need to pull the roll pin out of the air2 and attach your cable for the dump valve then Get two zip ties and put it on and get in the water! I
JASON B Mine is a Zeagle as well. It fits.
Thomas H I will use it with a first stage poseidon cyclon 5000, will it work? Until witch middle pressure the air 2 will work, the cyclon deliver about 11,5 bar.
FABIO E Scuba pro regulators are 10 bar. The orifice is adjustable with a hex wrench with out disassembly .
You may need to adjust it.
Joel M Isn't the hose (27") a bit short in case an emergency situation arises, and a second diver has to breath with it? Is it shorter then the standard octopus hoses in use? Thanks
PAUL M Wile using an Air 2, during air sharing with your dive buddy. You pass your primary 1st stage regulator to your buddy, and you use the Air 2 to breath from. Remember you have to control you buoyancy on the ascent, it works well when it's right in front of your face.
D DUANE M When using an Air 2 configuration you give your primary to the other diver and you use the Air 2.
J F D good question. The 27 hose is ok.
In the emergency when your buddy is out of air, YOU breath from your air 2 and give your primary to your out-of-air buddy. You need to face each other and "shake right hands" while you do your emergency ascent.
If you are out of air, your buddy breaths from his own air 2 and gives you his primary. Again you face each other, shake right hands and ascend properly.
pull your shoulder dump valve, or take the air 2 out of your mouth and release air with your left hand if you need to slow your ascent. Push the inflate button on the air 2 with your left hand if you need more bouyancy.
Practice with your buddy in controlled environment. The emergency isn't the first time you should try the technique which
works well, but is a little different.
JOHN R It is a little shorter than a regular octopus hose, but since it is for emergencies, you will use the regulator on the BC, and give your primary to the person having the problem. You may want to get a longer primary hose for your regulator. I like the Air 2 because it is one less thing banging around, getting caught on stuff. Hope this helped.
ROBERT B Joel,
I have been diving preety seriously for 25 years. Oddly, been using that air 2 the whole time. This is my take. Yes the how is short, but so is the flexible hose that inflates your bc. You can't reach out any farther than that anyway. That being said, after 25 years I finally pushed the limit and sucked a tank dry. My dive buddy was 10yds away and he also breathes scuba pro. I bolted to him, grabbed the air 2 and hugged like there was no tomorrow. We laughed about it later, me 225lbs him 170lbs. He said I squeezed the hell out of him!! Had the hose been a little longer. I think our ascent may have been a little easier, but it really wasn't a problem. I like to think of the air 2 more for me than my buddy anyway. If my primary fails the air 2 is always close by, not floating 3 feet away as with the long hose. The air 2 is also bulletproof. My first air 2 I bought in 1986 and it lasted until I bought the one you are looking at now. I am not the best with cleaning or maintenance either so it's a testament to the absolute durability if these products. Don't hesitate grab it, unless you dive crazy deep in holes and wrecks and your buddies tend to get stuck out at arms length. The air 2 is for you, like a reserve parachute. Plus when I am spearing it doesn't get jacked up in the line if I am shooting my big riffe and shock line seems to be everywhere after the retrieval. Take care, dive safe.
JACK A Hi Joel
The AIR2 is great. Easy to use, and not a real problem for buddy breathing.
Truth is, the need to buddy breathe is rare, as all divers have 2 regulators
This is my 2nd one I have had.
T T Yes, its shorter than a regular octopus. In an emergency, I would use the Air2 and my buddy would use my primary regulator. This is agreed upon before the dive so theres no confusion at the time.
JOSEPH S In an emergency situation you go old school (the way we were taught years ago). You breathe through the Air 2 and hand your primary to your buddy.
Shopper Will it work with Aqualung Axiom i3?
RANDAL B I bought a Scubapro Lady Hawk BCD for my daughter which only managed the BCD. I bought this "secondary air supply" to replace the BCD inflator and it works great on that BCD for this purpose.
FABIO E I would recommend the Atomic SS1.
It comes with a hose adapter.
The ss1 will save you money over time.
The service interval is 2 years.
ROBERT B I have not used it with that connection.
DAVID M I don't know, check with scuba p ro
Shopper Will this work with the Scuba Pro Glide 2000?
PAUL M Yes it will work
I have a Scubapro Glide and a Knighthawk BCD.
There are Air 2's on both of them.
DANEEN S Yes it will, it's a Scuba Pro BC and the Air II comes with a new inflator hose that is needed for flow rates while using the actual regulator. You will love it, it's really nice!
FABIO E Yea it will work with the glide 2000
HAROLD G SCUBAPRO uses a universal hose on all their BC's that is the same size. The Air 2 should be a perfect fit!
Shopper Will this work with OMS BCD's ?
TIM B Hi, the ScubaPro Air 2 is a fine choice as I have owned several over the past twenty years, and I still have them. But as for as fit and performance you might consider the Atomic SS1. The Atomic SS1 has an adapter to fit all BC hoses, being that's what you are looking for, and the performance is considerably better then the ScubaPro Air 2. I hope this helps.
Capt. Tim Bailes
Naui 9004L
MATTHEW C Not sure, I have mine installed on a zeagle bcd.. Great tool to have though, I love mine!
MARK W From the looks of it you should be able to use it on a OMS BC.
I took mine off my Scubapro and now have it on a Seaquest. I just had to put a different clamp around the inflator hose.
You could always contact OMS to see what the diameter of there hose is and then look at the diameter of the AIRII where you attach to determine how close it is.
ANTHONY L Sorry i do not know. This was bought for a Scuba Pro BCD.
RALPH S Absolutely. Just soak the end of the corrugated hose in very warm water for several minutes to ease placement onto the octo, zip tie it in place, and you're on your way.
Shopper does this Air 2 come with the inflator hose?
DANEEN S Yes it does. Love this unit and not having to have an octo and another hose.
ROBERT H Yes it came with it s own hose since it is a larger connection than the regular.
JASON K It does not come with the inflator hose.
GREGORY R Yes, when I bought mine a low pressure inflator hose was inclided
GEORGE O Mine came with a Scuba Pro hose so you will need to adapt it to your brand of BC.
HAROLD G Yes! There is a barrel connector on the hose that connects to the inflator which is included with the hose.
Shopper Will this work with a Sherwood Avid CQR2 BCD?
NORMAN S Yes it will work fine, just remove any zip ties and the pin from the old inflator and remove the assembly from the hose. Install the Air 2 making sure the pin goes thru the loop in the cable. Use zip ties to secure. Helps to use a little spit on the hose for lubrication when sliding it on.
Kris K Will this work with my Beuchat Masterlift X-Air Light 2 BCD?
STEVEN F I have no idea if will work for you but if it does you will like it, great ergonomics and stream line your gear I put it on ScubaPro Classic.
good luck
Shopper Does it work with my Scubapro Geo.BCD?
ROBERT H As far as I know the air 2 eill work and interchange on all scuba pro bcs
TIMOTHY M I am not familar with that bc but I believe that it will fit on almost any bc inflate hose. I bought two for two dirrent BC and it fit fine.
TIMOTHY H It should work with no problems at all. Even on LP, it's listed as an accessory for that BC.
Adel A Does it work with Sherwood Tortuga CQR BCD?
Chris R This is a really great regualtor, reasonably priced and should work great with any BCD.
Controls are very easy to feel in low visibility. I purchased for my son and would not buy anything cheap for him scuba wise.
RANDAL B Randy,
I bought this for my daughter's Lady Hawk Scubapro BCD and it works fine. Any time you take off a manual BCD inflator and connect this device to the primary stage via the included hose, I suspect that the performance will be acceptable.
m a Will this work with a SeaQuest Pro Q BCD? If not, what similar options do I have?
DAVID T I am using it on a scubapro clasic bc. The hose size is the same as my last air2. You would need to determine the hose size of your bc to see if it would fit. Scuba pro uses a 1" hose.
RANDAL B Randal B
I put this reg on my daughters Scubapro Lady Hawk BCD and it works fine. If you know how to remove the manual inflator for the BCD, just zip tie on the Air 2. I hope this is useful. Cheers.
TOMMY S I have used the Scubapro Air 2 on Zeagle Bcds. Both the Ranger and the Tech. It has a great fit and works great. Always at your shoulder for added security instead of chasing an octopus. It is a great breather also.
David B Will this work w/ a halcyon wing?
MOHAMED R yes is help a lot
MARK B I cannot answer the question because I have not examined a halcyon wing. I would think it would work on any BC with the scubapro air hose supply for the unit. Unless there was some large variation in the BC filler hose size. For example if the manufacturer had chosen a small hose for some reason...
Mark
JOHN T The intake/exhaust hose for the Halcyon should be compatible, as these are a standard diameter, and secured with a zip tie. The Halcyon Wing I just looked at a picture of has an inflator valve just like the one I took off my BC, so I'm sure that's right. The real issue is the power inflator hose fitting where it attaches to the Air 2. That quick-disconnect fitting is probably a different size from the one you have, so it may be necessary to buy a new power inflator pressure hose with the right connection. I do have two of these Air 2s, and they have been very reliable.
ROBERT P Not sure, never dove halcyon gear. Mine is set up with a Sherwood Avid, can tell you I have been very happy with it, if it works with your gear you will not be disappointed!
Shopper Can I put a ScubaPro Air 2 on an Oceanic Islander BCD?
LeisurePro S Sorry, unfortunately not. The Oceanic uses a 3/8" corrugated hose and the Air2 uses a 1" hose. Check out the Oceanic Air XS here.
Shopper What combo inflater will fit a cressi-sub bc?
LeisurePro S Check out SWDSPO which is universal and should fit Cressi's.
Shopper Is this made to fit a 1" diameter hose? Does this fit the Sherwood Magnum BCD?
LeisurePro S Yes, this has a 1" diameter hose. If your Sherwood is newer than 2002, this should work fine.
Shopper Will this work with the oceanic outrigger BC?
Shopper Will this fit a Scubapro Safari bcd?
LeisurePro S Yes, you shouldn't have a problem.
Shopper Will this fit the Cressi Aero pro bcd?
Shopper Will this fit a Sherwood '07 Avid CQR2 BCD?
Shopper Will this fit on my Mares Vera Frontier BCD?
LeisurePro S Sorry, no. This isn't compatible with Mares BCs.
Shopper Will this fit the TUSA plantina evolution BCD? How difficult is the installation?
LeisurePro S Installation is simple, requiring just a few simple tools. This should fit on your Tusa BC. TBTIR3, if you're interested, is the Tusa specific combo octo.
Shopper Can it be connected to a Zeagle black inflation BC? How do you connect the Air 2 to an existing BC? Does it have an installation manual?
LeisurePro S Yes, the Air 2 will fit on Zeagles. Installation is fairly easy (a few quick releases and switches) and will come with instructions.
Shopper How easy is it to install the Scubapro Air 2 on a Scubapro Pilot BCD? Also, does this Air 2 come with everything you need, including the any necessary hoses? Thanks.
LeisurePro S YES COMES WITH ALL AND IS DONE WITH BASIC TOOLS
Shopper Will this fit any scubapro bcd?
Shopper will it fit a cressi- sub line BC sku CSBL?
Shopper Does this safe second come with the LP hose, and how long is it?
Shopper Will this work with the Oceanic probe LX BCD?
Shopper Is this all that is needed to update a KnightHawk BCD?
Shopper Nitrox compatable?
Shopper How is this wth ice diving?
LeisurePro S Not recommended
Shopper Will this octopus work with Dive Rite rec wings?
LeisurePro S Yes it will fit in place of the inflator that comes on the Dive Rite wings
Shopper I have a SeaQuest Libra BC with airhose. Is this compatible? Currently there is the inflator.air release and a mouthpice for manual inflation of the bc.
Shopper Does this product come with matching hose?
LeisurePro S Yes it come with an LP hose
Shopper I have a Mares Vector Origin BC. Will this item fit on my BC?
Shopper Does it come with the inflator hose?
Warranty Information
This product has a limited lifetime warranty.
www.scubapro.com
(800) 468-2822
Whats in the box:Scuba Pro Air 2, Combination Octopus/Inflator Regulator, LP Hose and Owner's Manual When you took dive lessons you learned to perform specific skills to make you safe and comfortable underwater and at the surface. One of those skills was Buoyancy Control. Once you start diving for fun you use your Buoyancy Control Devise constantly throughout the dive. Your Octopus or Alternate Air Source Devise on the other hand is never used unless there is an Emergency Out of Air Situation. Reacting properly in an Out of Air Situation can make the difference between a Safe Dive and a Tragedy. If your Alternate Air Source and your BCD Inflator Devise are one and the same you will always know where to find it in an emergency. The 4th generation of the Air 2 by Scuba Pro is a Second Stage Regulator and Balanced Inflator in a Single, Compact Housing. The Air 2 - 4th Generation builds upon an already superior product. It is Lightweight, Streamline, and eliminates the need for a Backup-Regulator. The Air 2's Air-Balanced Power Inflator Valve means you'll have a steady stream of air, regardless of the pressure in your tank. The Air 2 - 4th Generation leaves you Breathing- Easy throughout your Dives. The Air 2 has a fixed Venturi Initiated Vacuum Assist (VIVA) Flow Vane for Safe and Uncomplicated use. The Air 2 provides One-Hand Operation for Instinctive and Simple Operation the Self-Flushing Mechanism requires just one Push-on-the-Purge to Clear away all Dirt or to Purge Water. The Regulator Mechanism is a Simple, yet Reliable Classic Downstream Demand Valve. Air 2 is equipped with an Ergonomic Mouthpiece, Soft Second-Stage Cover and One-Button Purge Function. The Regulator's Pre-Tuned System is Housed in a Precision Molded Carbon Fiber and Techno-Polymer Case for Strength and Durability. The Demand Valve is Chrome Plated Brass with a Stainless Steel Spring and a Silicone Rubber Diaphragm and Exhaust Valve. The Air 2 comes with a 3/8" Threaded 27.56" (70 cm) High-Flow Low-Pressure Hose; Owner's Manual and is covered by a Limited Lifetime Warranty.
- Scuba Pro Air 2, Combination Octopus/Inflator Regulator:
- Increased Safety in Out-of-Air Emergencies
- Air 2 by Scuba Pro is a Second Stage Regulator and Balanced Inflator in a Single, Compact Housing
- Lightweight, Streamline, Eliminates Backup-Regulator (Octopus)
- Balanced Power Inflator Valve
- Simple, Yet Reliable Classic Downstream Demand Valve
- Fixed Venturi Initiated Vacuum Assist (VIVA) Flow Vane
- VIVA: Safe and Uncomplicated Use
- One-Hand Operation for Instinctive and Simple Operation
- Self-Flushing Mechanism
- One-button purge function
- Single hose configuration
- One-hand operation
- Ergonomic Silicone Rubber Mouthpiece
- One Push-on-the-Purge to Clear away all Dirt or to Purge Water
- Soft Second-Stage Cover
- Pre-Tuned System
- Precision Molded Carbon Fiber and Techno-Polymer Case
- Strong and Durable Design
- Demand Valve: Chrome Plated Brass with Stainless Steel Spring
- Silicone Rubber Diaphragm and Exhaust Valve
- 3/8" Threaded 27.56" (70 cm) High-Flow Low-Pressure Hose
- Owner's Manual
- Limited Lifetime Warranty
| 2'nd Stage Type | Downstream Demand Valve | | Materials | Case: Carbon Fiber and Techno-Polymer
Demand Valve: Chrome Plated Brass
Spring: Stainless Steel
Diaphragm & Exhaust Valve: Silicone Rubber | | Hose Thread | 3/8" | | Hose Length | 27.56" (70 cm) | | Total Weight | 6.7 oz (190 g) | | Weight [with packaging] | 1.15 lb |
1/7/2013 5.0Great piece of equipment! 12/18/2012 5.0Great companion to a ScubaPro BC - Easy To Retrieve
- Easy To Use
- Slim Design
- Eliminating Hoses
- Last Resort
- Diving Type:
- Open Water Diving
- Was this a gift?:
- No
12/12/2012 5.0Best Combination Octopus/Inflator - Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Slim Design
- Eliminating Hoses
- Upgrading Equipment
- Diving Type:
- Drift Diving, Instruction, Night Diving, Open Water Diving, Rescue Diving
- Was this a gift?:
- Yes
- Does Not Leak
- Easy To Connect
- Easy To Retrieve
- Easy To Use
- Reliable
- Too Big
- Uncomfortable Mouthpiece
- Diving Type:
- Open Water Diving
- Was this a gift?:
- No
By dan m from london ontario canada - Does Not Leak
- Easy To Connect
- Easy To Use
- Reliable
- Eliminating Hoses
- Last Resort
- Upgrading Equipment
- Diving Type:
- Drift Diving, Night Diving, Open Water Diving, Rescue Diving, Wreck Diving
- Was this a gift?:
- No
|
|
Related products for Scuba Pro Air 2, Combination Octopus/Inflator Regulator, Black/Gray
|
Having the right stuff in your save-a-dive kit can make the difference between a great dive and the worst day of diving you ever had. Watching everyone else swimming out from the beach or making a giant stride entry off the back of the boat and you're just sitting there with a bad inflator mechanism is something that can be prevented if you come prepared. Always carrying spares of the easily replaceable parts can make this nightmare never happening to you. If you have a Scubapro Air 2 this is a must spare for your kit... more
Tags: General Accessories,Scuba Pro Air 2 Quick Disconnect Connector,Converts Standard Hose to Scuba Pro Air 2 Quick Disconnect Connector,A139,Assorted Accessories,Aqua
|
Scuba Pro's Crystal VU Mask with Purge has a Patented Tempered Single Glass Lens Design, with Patented No-Seam Side Windows for Increased Field of View. The Lenses are No-Tint Glass for Greater Visual Clarity and Safety in Diving. With its Double Feathered Edge Sealing Crystal Clear Silicone Rubber Skirt for Increased Comfort, Wide Split Style Mask Strap and Streamline Shape combined for a Snug Fit all makes this one great mask for any diver... more
Tags: Essential Equipment,Crystal Vu Mask with Purge,Masks,Scubapro Crystal Vu,Mask with Purge,Scubapro Mask with Purge,Scubapro,Scuba Pro Crystal Vu-Plus Mask with Purge Black/Gray
|
The Scub-Alert is very compact in size. Only the best quality components are used in manufacturing of the Aquatec Scub-Alert. The loud resonating frequency generated by this horn can be heard on the surface approximately half a mile away (1 kilometer). The Scub-Alert is not only starting to be a major requirement for many live-aboard and dive operations; it is also an essential piece of gear that will add to the enjoyment of the dive to any buddy team that needs to get each other's attention underwater... more
Tags: ,Scuba Pro Air 2,Signaling Device,Scub Alert,Tusa Duo-Air Ir-3,Aquatec Scub Alert under Water Signaling Device, Fits Scuba Pro Air 2 & Tusa Duo-Air Ir-3, Atomic Ss-1 (Sa-3), Zeagle Octo-Z,Sa3,Safety & First Aid,Aquatec,Add-on Gear,Atomic Ss-1,Underwater Signaling,Aquatec Scub,Aquatec Scub Alert Underwater Signaling Device
|
When using a Snorkel, the last thing you want is a mouthful of water - especially salt water - when you're hoping to fill your lungs with air. Scuba Pro's Laguna 2 Snorkel's Semi-Dry Top Design Closes upon Contact with Water keeping water out of your Snorkel's Barrel, allowing you to Breathe Easily. If a bit of water does sneak into the Snorkel, simply Exhale to use the Laguna's 2 Purge Valve (located near the mouthpiece). By putting the Purge Valve at the Bottom of the Snorkel... more
Tags: SCPSLGBK, Scubapro, Snorkels, Essential Equipment, Scuba Pro Laguna 2 Snorkel Black
|
The Scuba Pro Hybrid Socks are the perfect Companion for Full-Foot Fins when Tropical Diving or can be worn Under Thicker Boots as Layering for added Warmth in Cold Water. Whatever your needs are the Scuba Pro Hybrid Socks are a great addition to your Gear Bag. The Hybrid Socks have a 1.5 mm Nylon ll Neoprene Upper with a 2.0 mm Neoprene Non-Skid Textured Sole. The Socks Seams are Sewn-for-Strength-and-Durability. Socks are also equipped with Glide-Skin Cuffs for Ease of Donning. Socks are Black in color and are covered by a 12 month limited warranty.... more
Tags: SCPHS10, Scubapro, Boots, Exposure Protection, Scuba Pro Hybrid Socks with Non Slip Sole, Black 10
|
|
|