800.637.6880
212.645.1234
|
|
Pinnacle 7 mm Dry Suit Hood
4.5
See More Similar
Scuba Hoods »
|
|
Pinnacle 7 mm Dry Suit Hood 2X-Large
|
List Price:
|
$44.00
|
|
Our Price:
|
$39.95
|
|
You Save:
|
$4.05 (9%)
|
SKU:
PINHD7
In Stock
|
|
|
Questions about this item:
Lindsey M I just measured my head and found out that it is 21 1/4 inches around the fatest part. Then I measured my neck and found that it is 13 inches. So I am inbetween an XS and a S. Which should I get?
MARY J I have been very happy ice diving with a size M with back zipper. My head measures 21 3/4" ( I have baby-fine thin hair) and my neck is 13" My face is thin, oval and slightly long. Hope this helps. I
KRAG K Hi Lindsey. I bought this hood for diving in the cold waters of the Pacific Northwest and love it. I think that they size a little small. Personally, I would get the Small and try it on. I think Leisurepro has a fairly liberal return policy (just don't dive it......). I think you'll like the hood!
Krag
ADRIAN W My measurements are 22.75" and 15.75". I ordered a large. It fits very snug, but I shave my head, so that's ok. I would recommend you step up to small so it will not be as stressful on your hair when removing. Also, in 2 years of use, I have had little to no stretch. Very little water penetrates. Hope this helped.
JOHN B I can't help much. I need a large to an extra large and have not been able to buy an off the shelf hood that fits.
LAURA V If you are between sizes I recommend that you go with the larger size because it will fit over the neck of your dry suit comfortably. You don't want the combination of the hood and suit to be too tight around your neck and restrict the blood flow to your head. Increasing pressure at depth will make that problematic. You might get a little water flow in the hood, but that is better than the alternative. The hood has a good seal around the face so it shouldn't be a problem.
Warranty Information
This product has a limited warranty of 12 months.
www.pinnacleaquatics.com
(925) 606-8300
Whats in the box:Pinnacle 7 mm Dry Suit Hood Pinnacle's 7mm Dry suit Hood is constructed to keep a diver's head warm and comfortable while diving in very cold waters. The Hood is constructed from 7 mm Titanium Lined Nylon ll Neoprene throughout the Head and Neck Areas, 3 mm Face Seal with Smooth Skin-In Seal can be Trimmed-to-Custom-Fit the Face Mask Seal. Hood has a Non-Direct Automatic Vent that allows Air-to-Escape as necessary from the Top-of- the-Hood while Restricting Water to Re-Enter. If the Hood is used for Night or Low Light Diving Conditions you're sure to be seen with the Reflective Forehead Patch and Rear Pattern. The Hoods Seams are Double Glued and Blind- Stitched for Strength and Durability. The Short Neck Design allows the Hood to work in concert with Dry Suit Neck Seal. Hood can be worn with any Brand Dry Suit. The Pinnacle 7 mm Dry Suit Hood is available in Unisex sizes Small, Medium, Medium Large, Large, XL, and XXL, is Black in color and is covered by a 12 month limited warranty.
- Pinnacle 7 mm Dry Suit Hood:
- Material: 7 mm Titanium Lined Nylon ll Neoprene in Head and Neck Areas
- Seams: Double Glued and Blind Stitched for Strength and Durability
- 3 mm Face Seal with Smooth Skin-In Seal
- 3 mm Face Seal: Can be Trimmed to Custom Fit the Face Mask Seal
- Non-Direct Automatic Vent Allows Air-to-Escape from Top-of- the-Hood while Restricting Water to Re-Enter
- Reflective Forehead Patch and Rear Pattern for Low Light or Night Diving Conditions
- Short Neck Design Work in Concert with Dry Suit Neck Seal
- Can be Worn with Any Brand Dry Suit
- Unisex Sizes: Small, Medium, Medium Large, X-Large and 2X-Large
- Color: Black
- 1 Year Limited Warranty
| Material | Nylon ll Neoprene | | Thickness | Hood: 7 mm
Face Seal: 3 mm | | Seams | Double Glued and Blind-Stitched | | Weight [with packaging] | Medium: 0.35 lb, Large, Small: 0.45 lb, 2X-Large, Medium/Large: 0.5 lb, X-Large: 1.05 lb |
7/16/2012 5.0Pinnacle 7mm Drysuite Hood 
By diver Karen from Cincinnati, OH - Durable
- Prevents Water Movement
- Warm
- Sizing:
- Feels half size too big
- Diving Type:
- Cave Diving, Drift Diving, Night Diving, Open Water Diving, Rescue Diving, Wreck Diving
- Was this a gift?:
- No
9/27/2011 5.0XL hood fits size 7 5/8 hat size - Good Fit
- Prevents Water Movement
- Warm
- Sizing:
- Feels true to size
- Diving Type:
- Cave Diving, Drift Diving, Night Diving, Open Water Diving, Rescue Diving
- Was this a gift?:
- No
1/21/2009 (1 of 1 customers found this review helpful) 3.0Wished I'd seen a profile view By Hoodie from Milwaukee,WI - Sizing:
- Feels half size too big
- Diving Type:
- Open Water Diving
|
|
Related products for Pinnacle 7mm Drysuit Hood 2X-Large
|
Pinnacle's 7mm Dry suit Hood is constructed to keep a diver's head warm and comfortable while diving in very cold waters. Constructed from 7mm titanium lined neoprene throughout the head and neck area, with 3mm face seal with smooth skin seal for added warmth. Face seal can be trimmed to any desired size. Hood is vented to allow air to escape if necessary, and has reflective front patch and rear pattern for instant recognition and safety. Hood can be worn with any brand dry suit.... more
Tags: PINHD7ML, Pinnacle, Hoods, Exposure Protection, Pinnacle 7mm Drysuit Hood Medium/Large
|
The 3 mm Hood is a Full-Featured 3 mm Wetsuit Hood. Built to the same Exacting Standards as Pinnacle's 7 mm hoods, the 3 mm Hood is ideal for divers who Chill Easily in Warm Water, Cool Water, and Hearty Cold Water Divers. Hood is constructed from 3 mm Titanium Lined Nylon ll Neoprene throughout the Hood and Neck areas, has a Large Bib that Tucks into the Wetsuit for a Better-Seal and Greater-Warmth, Smooth-Skin Outer Surface on Bib Creates Seal against Wetsuit, keeping Water Out, and 3 mm Face Seal with Smooth-Skin Seal Minimizes Water Exchange... more
Tags: PINH32X, Pinnacle, Hoods, Exposure Protection, Pinnacle 3 mm Hood 2X-Large
|
Buy Bare XCS2 Tech Dry Drysuit Black 2X-Large from LeisurePro the divers emporium. Its a Drysuits from category Exposure Protection. Bare XCS2 Tech Dry Drysuit Black 2X-Large can be posted worldwide.... more
Tags: BREXCS22XL, Bare, Drysuits, Exposure Protection, Bare XCS2 Tech Dry Drysuit Black 2X-Large
|
Pinnacle's 7mm Hood is constructed to keep a diver's head warm and comfortable while diving in very cold waters. Hood is constructed from 7mm titanium lined neoprene throughout the hood and neck areas, has a large bib that tucks into wetsuit for a better seal and greater warmth, smooth-skin outer surface on bib creates seal against wetsuit, keeping water out, and 3mm face seal with smooth-skin seal. The face seal can be trimmed to any desired size; automatic vents allow air to escape as necessary from the top of the hood while restricting water to re-enter... more
Tags: PINH72XL, Pinnacle, Hoods, Exposure Protection, Pinnacle 7mm Hood 2X-Large
|
The 5mm Hood is a full-featured 5mm wetsuit hood. Built to the same exacting standards as Pinnacle's 7mm hoods, the 5mm Hood is ideal for divers who chill easily in warm water, cool water, and hearty cold water divers. . Hood is constructed from 5mm titanium lined neoprene throughout the hood and neck areas, has a large bib that tucks into wetsuit for a better seal and greater warmth, smooth-skin outer surface on bib creates seal against wetsuit, keeping water out, and 3mm face seal with smooth-skin seal... more
Tags: PINH52XL, Pinnacle, Hoods, Exposure Protection, Pinnacle 5mm Hood 2X-Large
|
The Merino Lined Dry Suit Hood is the warmest hood available, and will keep a Dry Suit Diver's Head Warm and Comfortable in even the most Severe Water Temperatures. The Hood is constructed from 7 mm Titanium Lined Nylon ll Elastiprene Neoprene throughout the Head and Neck Areas, with Pinnacles patented Merino Lining throughout. Merino-Lining adds up to 35% more Thermal Efficiency then Standard Neoprene Rubber alone. Merino also does not promote the Growth-of-Bacteria, making it Hygienic and Reduces Odor. The Hoods Seams are Double Glued and Flat-Lock Stitched for Strength and Durability... more
Tags: PINHD7MZ2X, Pinnacle, Drysuits, Exposure Protection, Pinnacle 7 mm Merino Lined Zippered Dry Suit Hood 2X-Large
|
The 3 mm Beanie is great for Warm Water Diving as well as Surfing, Water Skiing and other Water Sports. Since the majority of a Diver's Heat-Loss is through their Head, this Light and Comfortable Beanie is enough to really improve a Diver's Comfort Level. Constructed for 3 mm Titanium Lined Nylon ll Neoprene, which is very Stretchy and Comfortable. Beanie is equipped with a Velcro Fastener Chin Strap to keep Beanie Securely-in-Place, Protects Head from Sunburn when worn, excellent for Tropical Diving in the Hot Sun. All Seams are Glued and Sewn for Strength and Durability... more
Tags: PINHB32XL, Pinnacle, Hoods, Exposure Protection, Pinnacle 3 mm Beanie Hood 2X-Large
|
The new V-Skin is the latest innovation from Pinnacle; it separates the thermal component out of the wetsuit accessories so that it can be used in any water sports activity. Lightweight V-Skin Hood Controls Hair Protects from the Elements and Increase Warmth. The V-Skin Hood has Super Stretch Lycra that allows Snug yet Comfortable Fit. The Antibacterial Characteristic of the Merino lining reduces the chance of Ear Infections when wearing the hood... more
Tags: PINVSHXL, Pinnacle, Hoods, Exposure Protection, Pinnacle V-Skin Hood X-Large
|
|
|