800.637.6880
212.645.1234
|
|
OMS BC Disassembly Tool
5
See More Similar
Scuba Diving and Snorkeling Accessories »
|
|
OMS BC Disassembly Tool
|
List Price:
|
$23.74
|
|
Our Price:
|
$13.95
|
|
You Save:
|
$9.79 (41%)
|
SKU:
OMSBCT
In Stock
|
|
|
Warranty Information
This product has a limited warranty of 12 months.
www.omsdive.com
(845) 692-3600
Technical Divers tend to be more equipment oriented then the average sport diver. Because of this fact many have become certified asa technician, which allows them to work on their own equipment. Being able to disassemble their BCD to repair the inner bladder or to perform preventative maintenance requires special tools and fixtures. OMS BC Disassembly Tools are what the technician/diver willneed in order to complete the task properly. These Non-Corrosive Plastic Tools are designed to remove all OMS Inflator and Over Pressure and Dump Valve Assemblies. Tools allow the qualified technician to completely disassemble the bladder(s) from the outer bag.
- Non-Corrosive Material
- Removes Inflator Mechanism
- Removes Dump and OPV's
| Weight [with packaging] | 0.3 lb |
8/1/2008 5.0A tool that everyone should have
|
|
Related products for OMS BC Disassembly Tool
|
This 70 lb lift BC is the first in the line of the new Larry Green Signature Series BC's and incorporates the latest thinking in hydrodynamic engineering. Deep underwater cave explorer Larry Green conceptualized this innovative design after many years of deep cave diving experience. The BC is designed and tailored to fit the full length of the cylinders providing increased control over trim and the reduced width of the BC dramatically reduces drag. This is the first BC to be produced that is specifically tailored tofit longer cylinders... more
Tags: OMSSB7LG, OMS, Buoyancy Compensators, Essential Equipment, OMS BC-LGS70, Larry Green Signature Series BC 70 lb lift
|
Pull down the zipper of the outer cover of the OMS_ BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU). This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks. Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU... more
Tags: Oms 100 Lb. Lift Bungee Style Single Bladder Black,Essential Equipment,Single Bladder,Retraction Bands100lbs. Lift,Oms Retraction Bands 100lbs,Oms,Buoyancy Compensators,Oms Single Bladder
|
Pull down the zipper of the outer cover of the OMS_ BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU). This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks. Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU... more
Tags: Essential Equipment,Bladder without Retraction Bands,Oms Single Bladder without Retraction Bands 32 Lb. Lift Red,Oms Retraction Bands,Oms,Buoyancy Compensators,Oms Single Bladder
|
Pull down the zipper of the outer cover of the OMS¦ BC and you will see 1000 denier Nylon fabric backed with 5 to 6 oz. of Thermoplastic Polyurethane (TPU). This thicker TPU coating helps prevent abrasion and increases puncture resistance. Most competitors use only 1/2 oz. or no urethane backing on their BC covers making them susceptible to punctures, abrasion and subsequent leaks. Housed inside the outer cover we use a puncture resistant bladder constructed from 200 denier Nylon fabric backed with .12 mm of TPU... more
Tags: Essential Equipment,Oms Retraction Bands 45lbs,Single Bladder,Oms 45 Lb. Lift Bungee Style Single Bladder, Black,Retraction Bands 45b. Lift,Oms,Buoyancy Compensators,Oms Single Bladder
|
The 60 lb. lift dual bladder is equipped with elastomeric bands for low drag. OMS BC's uses rugged 1000 denier Nylon backed with 5-6 oz. Thermoplastic Polyurethane (TPU) for superior abrasion resistance in all overhead environments. The inflation and dump valves are interchangeable for ease of configuration from top to bottom. Like all OMS BC's 60lbs Dual Bladder integrates with many OMS harnesses where integral pull dump tunnels can be used to route the BC dump valve cords for ease of access. Trim and Airflow This BC is engineered with a 60 lb. lift dual bladder design... more
Tags: Essential Equipment,Oms Bungee Style,60lbs. Dual Bladder,Oms 60 Lbs. Dual Bladder Bungee Style Red,Dual Bladder Bungee Style,Oms,Buoyancy Compensators,Oms 60lbs
|
OMS packaging clearly identifies this easy to grip, 8" long handled cable cutter. This emergency cutter is specially designed to beeasy to grip with cold water gloves and mitts, can cut through nasty Spyder Wire, 14/3 electrical cable, and is supplied with a total of (3) blades: 2 stainless and one demo carbon installed in the cutter. This Tool has a mounting hole in the handle for securing to your pouch or can be inserted into the optional BCA 266 tool pouch (pouch mounts in either a vertical or horizontal position).... more
Tags: Oms Cable Cutter,Oms Water Line,Knives,Oms Line and Cable Cutter,Oms Water Line and Cable Cutter,Oms,Add-on Gear
|
The Diver Tool Kits attach to the shoulder or waist of your BC and contain a BC Knife and Stainless Steel EMT Shears in a Ballistic Nylon Pouch. The Corrosion Resistant Knife is 6.5" long overall. The knife is securely snapped in place when not in use, but is easily removed from the sewn sheath with one hand. Knife blade is made of stainless steel and has a straight edge on one side and a serrated edge on the other; blade is also equipped with a line cutter. The EMT Scissors are also made of Corrosion Resistant Stainless Steel and can cut almost anything you may need to cut in an emergency... more
Tags: Diver Tool Kit,General Accessories,Zeagle Diver Tool Kit,Assorted Accessories,Zeagle Diver Tool Kit with Emt Scissors & Knife,Zeagle Knife,Zeagle,Zeagle Emt Scissors and Knife
|
All-In-One Tank Valve Multi-Tool Everything you need in one tool to completely disassemble and reassemble tank valves! Includes coated comfort grip handle. Separate tools for Sherwood Genesis and Thermo valves.... more
Tags: AQUTVG, Innovative Scuba, General Accessories, Assorted Accessories, Tank Valve Multi Tool Genesis (Blue)
|
Back Plates: OMS's superior d- burring process eliminates back plate sharp edges and prevents abrasion to webbing and BC's. The Aluminum Back Plate weighs 1.75 lbs include the following slots: 1" and 2" width Crotch Strap, (2) Cam band, and a bottom slot to accommodate bandbolts that are slightly off 11" On Center. The Aluminum Plate is Hard Coat Anodized. Harness: The OMS deluxe harness is perfect for those who want a quality diving harness with a single left side quick release. The deluxe harness is a cross shoulder harness... more
Tags: OMSABPHU, OMS, Buoyancy Compensators, Essential Equipment, OMS Un-Strung Standard Harness with Aluminum Back plate (BP020-SH)
|
Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Aluminum Back plate weighs 1.75 lbs. The Aluminum Plate include the following slots: 1" and 2" width Crotch Strap, (2) CamBand, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Aluminum plate is Hard Coat Anodized and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness... more
Tags: OMSCHS2O, OMS, Buoyancy Compensators, Essential Equipment, OMS Comfort Harness System II Harness System Only X-Large
|
Back plates: OMS's superior de-burring process eliminates back plate sharp edges, and prevents abrasion and cuts to webbing and BC's. The Aluminum Back plate weighs 1.75 lbs. The Aluminum Plate include the following slots: 1" and 2" width Crotch Strap, (2) CamBand, and a bottom slot to accommodate band bolts that are slightly off 11" On Center. Aluminum plate is Hard Coat Anodized and now incorporates additional slots to mount cam bands for single cylinder configuration. Harness The OMS Comfort Harness System II is perfect for those who want a quality diving harness... more
Tags: OMSCHS2ALU, OMS, Buoyancy Compensators, Essential Equipment, OMS Comfort Harness System II with Aluminum Plate Un-Strung Large
|
|
|