Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB7, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 7.25" 2.5" WIDTH
|
Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB8, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 8.00" 2.5" WIDTH
|
Don't let accidental cross threading or a damaged butterfly nut cause aborting a dive. Always carry spare hardware for your doubles set up. XS Scuba's Complete Spare Hardware Kit comes in two size kits for 7.25" and 8.0" (18.4 and 20.3 cm) diameter cylinder set ups. All bolts, washers, locknuts, and butterfly nuts are manufactured from 100% 18-8 stainless steel for corrosion resistant's and durability. The 7.25" (18.4 cm) Kit uses 3/8" Bolts and the 8.0" (20.3 cm) kit uses 5/16" bolts.... more
Tags: XSSSSTB8W, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Cylinder Bands 8.00" 3.0" WIDTH
|
DIN Valves need special protection to keep water or debris from entering the valve opening when the regulator is not threaded to the valve. XS Scuba's 316 Grade Stainless Steel DIN Plugs are precision machined to protect your DIN valves the way they need to be protected. Oxygen cleaned and equipped with Viton O-ring for a complete seal of your DIN valve from the elements and contaminations, the XS Scuba Stainless Steel DIN Plug should be your only choice.... more
Tags: XSSSSDP, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel DIN Plug
|
Good Quality all 304-Stainless Steel Buckle is Corrosion and Impact Resistant for Durability and years of Reliable Service. Great item for a Save-a-Dive Kit Highland by XS Scuba's Stainless Steel Harness Buckle has a Solid Stainless Steel Hinge Pin and a Positive Cam Lock Lever for great Security and Positive Retention. Buckle is designed to be used with Standard 2" (5.1 cm) Webbing.... more
Tags: XSSHB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Harness Buckle
|
Mounting systems for pony bottles can have you pulling your hair out just to get them set up on your rig. XS Scuba's Highland Stainless Steel Pony Mount removes all the frustration and makes the attaching and detaching a breeze. Made from (316 grade) stainless steel for corrosion resistant durability and long life this unique mounting system comes equipped with rubber feet to protect your cylinders finish. Pony Mount allows mounting of pony bottle on right or left side and upright or upside-down. Pony Mount is designed to fit 6.9" to 8.0" (17.5 to 20... more
Tags: XSSSSPM, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Stainless Steel Pony Mount
|
Highland by XS Scuba's Stainless Steel Back-Plate is made from Durable and Corrosion Resistant 11 Gauge (.115"/2.92 mm) 316 Grade Stainless Steel. Back-Plate weighs in at 5 lbs (2.27 kg) and is Laser Cut for Dimensional Accuracy. To Protect the Harness Webbing, the Stainless Steel Back-Plate has CNC-Machined Beveled Edges and a final "Polished Finish" by Hand for Smooth Slots and Holes. Back-Plate has Angled and Horizontal Slots for "Straight" or "Cross-Over" Shoulder Strap Configurations, Mounting Holes at 11" (27... more
Tags: XSSSSB, Highland Millworks, General Accessories, Assorted Accessories, Highland by XS Scuba Steel Back-Plate
|
Highland by XS Scuba's Thin Line Pressure Gauge is a Compact, Thin, and High Quality Pressure Gauge that's built to last! The Gauge Housing is manufactured with Nickel-Plated Brass and is equipped with a Durable Lexan Lens for years of Reliable Service. SPG is ready to mount directly to a high pressure hose with its included Air-Spool with Viton O-rings. The Pressure Gauge has a Bright White Face that is Luminescent, so it's easy to read both in bright or low light conditions. Gauge has a Wide 240º Sweep from 0 to 5000 psi. The Gauge measures 5.1 x 1.9 cm (2" x 0... more
Tags: XSSTLSPG, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Thin Line SPG
|
Highland by XS Scuba's Thin Line Pressure Gauge is a Compact, Thin, and High Quality Pressure Gauge that's built to last! The Gauge Housing is manufactured with Nickel-Plated Brass and is equipped with a Durable Lexan Lens for years of Reliable Service. SPG is ready to mount directly to a high pressure hose with its included Air-Spool with Viton O-rings. The Pressure Gauge has a Bright White Face that is Luminescent, so it's easy to read both in bright or low light conditions. Gauge has a Wide 240º Sweep from 0 to 420 bars. The Gauge measures 5.1 x 1.9 cm (2" x 0... more
Tags: XSSTLSPGM, Highland Millworks, Gauges, Essential Equipment, Highland by XS Scuba Thin Line SPG, Metric
|
Highland by XS Scuba's Titanium EMT Shears are a Strong an Durable Pair of Shears that can Cut through most Anything! Shears are manufactured with 420-Grade Stainless Steel with a Rust-Resistant Titanium Coating. The Titanium EMT Shears have Bright Red Handles for easy identification. The Shears Hinge Bolt is made from 304-Grade Stainless Steel. All in all these are one great pair of shears!... more
Tags: XSSTEMTS, Highland Millworks, Knives, Add-On Gear, Highland by XS Scuba Titanium EMT Shears
|
360º full circle design||Three sets of 11in on center grommets||22 mil thick urethane bladder||Cover 1000Denier nylon cordura with urethane lamination||Heavy nickel plated brass grommets||#138 nylon bonded thread||Miflex low pressure quick disconnect inflator hose||Old School tech inflator, center point attachment||YKK #5 Delrin zipper for access to the bladder||Right or left side OPV... more
Tags: XSSW37, XS Scuba, General Accessories, Assorted Accessories, Highland by XS Scuba Wing Bladder 37 LB
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Attachment points for lights, cameras, gauges, game bags, extra air bottles or maybe even a fish stringer when spear fishing. Having a few spare attachment points on your gear is a must for the serious diver. The SR-1 is a rigid, easy to hit corrosion resistant 304L (low carbon) stainless steel ring with only 1.25" (3.2 cm) of standoff at approximately 10°, yet it will accommodate the largest clips and carabineers. It offers the most efficient means for slinging bottles to the harness... more
Tags: MNTSR1, Manta, General Accessories, Assorted Accessories, Highseas Millwork Drop Dee for Shoulder Straps
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Attachment points for lights, cameras, gauges, game bags, extra air bottles or maybe even a fish stringer when spear fishing. Having a few spare attachment points on your gear is a must for the serious diver.Highseas End Loop is a 304L Stainless Steel (low carbon) 1" (2.5 cm) Loop welded to the end of a 2" (5.1 cm) keeper. The End Loop is easy to install perfect to add to your harness assembly as an additional attachment point for accessories... more
Tags: MNTEL, Manta, General Accessories, Assorted Accessories, Highseas Millwork End Loop
|
Fixed Waist Staging Ring is the complimentary partner to the Shoulder Drop Dee (SR-1) SKU: MNTSR1. Used as upper and lower clip-off locations for slinging bottles, together they allow the diver efficient one-handed stage bottle management. Hunting for the D-ring with one hand and clipping off with the other is history. The stainless steel WR-2 may be positioned comfortably anywhere on the waist belt or directly over the hip because of its contoured base. Ring is oriented at approximately 40° to the base plate... more
Tags: MNTWR2, Manta, General Accessories, Assorted Accessories, Highseas Millwork Fixed Waist Staging Ring
|
We always need to attach more stuff to our equipment to free up our hands when we need them. Attachment points for lights, cameras, gauges, game bags, extra air bottles or maybe even a fish stringer when spear fishing. Having a few spare attachment points on your gear is a must for the serious diver.Highseas Lo Pro 45° Keeper is a 1" (2.5 cm) Dee ring welded to a 2" (5.1 cm) keeper at a slight angle. The Lo Pro 45° Keeper is perfect to add to your harness assembly as an additional attachment point for accessories... more
Tags: MNTKP45, Manta, General Accessories, Assorted Accessories, Highseas Millwork Keeper Lo Pro 45°
|
Not your ordinary line stop, the Highseas line stop allows you to clip your lift bag to your reel with ease. Just tie your reel line to this double loop corrosion resistant 304L (low carbon) stainless steel line stop and you can easily clip your lift bag, safety sausage or follow, diver down safety float to the open loop.The Line Loop is also very handy to clip to line ends together that already have carabineers or gate clips attached to them. Make sure you have several spares in your Save-A-Dive Kit. Made in the USA and comes with a 60 month limited warranty.... more
Tags: MNTLS, Manta, General Accessories, Assorted Accessories, Highseas Millwork Line Stop
|
Have you ever found yourself over a reef while fining and experience surge that causes you to damage the reef? Reef Sticks are commonly used by divers to control their buoyancy over the reef. The reef stick is there to keep the diver off the reef. These reef sticks are made of corrosion resistant stainless steel rod. Included with the set are one small 9" (22.9 cm), one large 16" (40.6 cm) and a stainless steel small double end snap. The top end of the Reef Sticks has a loop for attachment to the double ended snap. Snap easily attaches to BCD accessory D-Ring for quick access... more
Tags: MNTRSS, Manta, General Accessories, Assorted Accessories, Highseas Reef Stick set 9" (22.9 cm) and 16" (40.6 cm)
|
Buy Hitcase Chest Harness Mount, Black from LeisurePro the divers emporium. Its a General Accessories from category Assorted Accessories. Hitcase Chest Harness Mount, Black can be posted worldwide.... more
Tags: HCSCM, Hitcase, General Accessories, Assorted Accessories, Hitcase Chest Harness Mount, Black
|
Hitcase Pro has a built in custom wide angle lens for capturing professional quality photos and videos. It greatly expands your effective field of view on your iPhone¦ so you can grab more of the scene in your videos. Waterproof up to 33 feet.... more
Tags: HCSI4P, Hitcase, General Accessories, Assorted Accessories, Hitcase Pro Waterproof Case For Iphone 4/4S, Black
|
Hitcase Pro has a built in custom wide angle lens for capturing professional quality photos and videos. It greatly expands your effective field of view on your iPhone¦ so you can grab more of the scene in your videos. Waterproof up to 33 feet.... more
Tags: HCSI5P, Hitcase, General Accessories, Assorted Accessories, Hitcase Pro Waterproof Case For Iphone 5, Black
|
Hitcase is not just another rugged waterproof iPhone 4/4S case. Engineered like no other enclosure, we are obsessed with making it the toughest and best iPhone case ever. Our founder made a personal wish list of what he considered the ultimate waterproof iPhone case should be and worked from that list to create Hitcase. Waterproof up to 30 feet.... more
Tags: HCSI4, Hitcase, General Accessories, Assorted Accessories, Hitcase Waterproof Case For Iphone 4/4S, Black
|
Buy Hitcase Windshield mount/suction cup mount, Black from LeisurePro the divers emporium. Its a General Accessories from category Assorted Accessories. Hitcase Windshield mount/suction cup mount, Black can be posted worldwide.... more
Tags: HCSWM, Hitcase, General Accessories, Assorted Accessories, Hitcase Windshield mount/suction cup mount, Black
|
The HitchSafe slides into your current standard 2" Hitch Receiver on your Truck,SUV or Van and is secured inside the Receiver Hitch via two bolt retaining bars inside the HitchSafe. The Hitch Receiver itself is a solid steel vault that combined with the HitchSafe provides the most secure location on your vehicle to store spare keys, credit cards, cash and driver's license!! To access your keys you simply release the Rubber dust cover (made to look like any normal Hitch Cover), enter in your personal 4 number dial combination, which then releases the drawer and allows access to your keys... more
Tags: AQUHSKV, Innovative Scuba, General Accessories, Assorted Accessories, HitchSafe Key Vault
|
RATED FOR 30 TO 50lbs||USCG Approved PFD||Child Specific Design||Highly Visible Bright Colors... more
Tags: HOSVCP, HO Sports, Life Jackets & Vests, Watersports, Ho Sport Pursuit Child CGA Vest
|
RATED FOR UP TO 30lbs||USCG Approved PFD||Toddler Specific Design||Highly Visible Bright Colors... more
Tags: HOSVTP, HO Sports, Life Jackets & Vests, Watersports, Ho Sport Pursuit Toddler CGA Vest
|
13in Molded EVA Grip||12 Strand Poly-E Rope||70ft Mainline Included... more
Tags: HOSRMEBK, HO Sports, Boards & Ski's, Watersports, Ho Sport Ski 13" Molded EVA Rope Package Black/White
|
13in Molded EVA Grip||12 Strand Poly-E Rope||70ft Mainline Included... more
Tags: HOSRMEBL, HO Sports, Boards & Ski's, Watersports, Ho Sport Ski 13" Molded EVA Rope Package Blue
|
13in Molded EVA Grip||12 Strand Poly-E Rope||70ft Mainline Included... more
Tags: HOSRMERD, HO Sports, Boards & Ski's, Watersports, Ho Sport Ski 13" Molded EVA Rope Package Red
|
ARS (Anti-Roll System) Equipped||1in Diameter Std. Grip||4 Way Weave Braid Construction||8 Section AWSA approved tow rope... more
Tags: HOSRHBK, HO Sports, Boards & Ski's, Watersports, Ho Sport Ski LTD ARS Rope/Handle Package Black
|
ARS (Anti-Roll System) Equipped||1in Diameter Std. Grip||4 Way Weave Braid Construction||8 Section AWSA approved tow rope... more
Tags: HOSRHBL, HO Sports, Boards & Ski's, Watersports, Ho Sport Ski LTD ARS Rope/Handle Package Blue
|
|